Product Dimensions

NOTE: Drawing is not to scale.

SPECIFICATION SHEETS 021111

Product Dimensions

Decorator Wall Hood

DA399-5

110 Volt - 15 Amp 3-wire power

supply connects through top or rear of

chimney.

Standard 110 Volt Oultlet

35 7/16"

20 1/2"

28 5/16" - 40"

See Notes

4 3/4"

Notes

• All installations must be done in

accordance with local codes.

• Recirculation: 32 11/16" - 45 1/4"

• 6" duct connects to blower system inside

chimney.

Location Codes

E -

O -

10 5/8"

11 7/16"

Front Perspective

PAGE 1
Product Dimensions Decorator Wall Hood DA399-5 E O 1 11 7/ 6" 4 3/4" Front Perspective 28 5/16" - 40" See Notes 10 5/ 8" 20 1/ 2" 16" 35 7/ Location Codes E - 110 Volt - 15 Amp 3-wire power supply connects through top or rear of chimney. O - Standard 110 Volt Oultlet Notes • All installations must be done in accordance with local codes. • Recirculation: 32 11/16" - 45 1/4" • 6" duct connects to blower system inside chimney. NOTE: Drawing is not to scale.
PAGE 2
Installation Dimensions Decorator Wall Hoods DA399-5 Ceiling Line Structural member S + 13 3/16" Area must be reinforced with a minimum of 1/2" plywood backing Center Line Notes • Center unit over cooking surface • Distance "S" is determined by the cooking surface. Minimum distance "S" is: - 18" for electric surfaces - 26" for gas surfaces • Area behind mounting plates MUST be reinforced using a minimum of 1/2" plywood.