30” Classic Wall Ventilation Hood DA 398-7 8mieleusa.
30” Classic Wall Ventilation Hood DA 398-7 SPECIFICATIONS DA 398-7 — Item 28398750USA Overall Unit Width 297/16” (748 mm) Overall Unit Height (Air Extraction) 273/8” — 40” (695—1015mm) Overall Unit Height (Recirculation) 321/2” — 451/16” (825—1145mm) Overall Unit Depth 201/2” (520 mm) Chimney Dimensions 113/8” (290mm) W x 105/8” (270mm) D Fan Fan Speeds 4, Including Intensive setting Maximum CFM 625 CFM, (Reducing Collar is available to reduce Air flow to less than 400 CFM, more information on
0” Classic Wall Ventilation Hood DA 398-7 PRODUCT VIEW 7: 7: PLEASE NOTE: The majority of the weight of the installed ventilation system will be supported by the lower retaining plate. It must be firmly attached to the stud framing behind the drywall. If studs are not available in the required locations, a plywood backing (min. ½” (13 mm) thick) spanning at least two studs must be installed.
30” Classic Wall Ventilation Hood DA 398-7 INSTALLATION SPECIFICATIONS Distance Between Cooktop and Ventilation Hood (S) DA 398-7 Page 4 of 8 Specification Sheets TRS 04242017
30” Classic Wall Ventilation Hood DA 398-7 INSTALLATION SPECIFICATIONS Recirculation Kit DUW 20 For Recirculation mode conversion kit DUW 20 is required.
30” Classic Wall Ventilation Hood DA 398-7 INSTALLATION SPECIFICATIONS 30” Wall Hood Chimney Extension DATK1-760 DATK1-760: L = 30” (760 mm) Height H with chimney extension Kit: H = Standard unit height + 111/4” (285 mm) (1) Air outlet installed upwards for recirculation mode DA 398-7 Page 6 of 8 Specification Sheets TRS 04242017
30” Classic Wall Ventilation Hood DA 398-7 INSTALLATION SPECIFICATIONS 40” Wall Hood Chimney Extension DATK1-1000 DATK2-1000: L = 393/8” (1000 mm) Height H with chimney extension Kit: H = Standard unit height + 2011/16” (525 mm) (1) Air outlet installed upwards for recirculation mode DA 398-7 Page 7 of 8 Specification Sheets TRS 04242017
30” Classic Wall Ventilation Hood DA 398-7 Reducing Collar (Optional Accessory) If you would like to reduce the enviromental impact of your ventilation system by limiting the CFM output the Reducing Collar can be installed. It reduces the air flow to less than 400 CFM. Check local building codes for maximum CFM requirements.
