Quick start guide CVA 50xx These short instructions are not a substitute for the Operating instruction booklet supplied with your coffee machine. Please read the Operating instruction booklet supplied with your machine before using it for the first time and take note of the Warning and Safety instructions as well as the full descriptions on how to use your machine. en - GB, AU, NZ M.-Nr.
a Master switch b Ground coffee chute cover c Ground coffee chute d Slide control to select fineness of ground coffee e Coffee bean container f Drip tray with grid for easier carrying g Water container (with mains water inlet device on the CVA 5065 only) h Brew unit i Waste container j Central spout connector (connecting the brew unit and the central coffee spout) k Stainless steel milk flask Accessory: 1 large cleaning container, 1 small cleaning container, 1 additional lid for stainless steel milk flask
Using the coffee machine - first steps Controls s On/Off sensor for switching the coffee machine on and off < Left arrow, for scrolling through the various programme options OK Sensor for confirming the selection of a programme option and for saving a setting > Right arrow, for scrolling through the various programme options - Sensor for hot water Display Drinks selection: coffee, J = hot milk, L = milk froth User profile: n for up to 9 different users Maintenance programmes: G = Milk pipework, Brew unit
Notes on operation Double portion ^ When using coffee beans, a double portion of coffee or espresso can be selected. To do this, touch the OK sensor again whilst "2 portions?" is in the display. To interrupt the drink-making process ^ Touch the OK sensor whilst "Stop" is in the display. Drinks with milk ^ Open the door, and place the milk flask inside the door. ^ Fill the stainless ^ Close the lid, steel milk flask to making sure it fits 2-3 cm below the properly. rim of the flask with cold milk.
Programming the amount: setting the portion size for cappuccino and latte macchiato ^ Confirm by ^ Touch and keep ^ Use the arrow ^ Place a cup or touching the OK sensors to select your finger on the glass of the resensor. the option for the OK sensor until quired size under quantity you the options for the outlet spouts, require. the drinks and select the selection appear drink of your in the display. choice.
Important care tips All parts except for the brew unit, the coffee bean container, the stainless steel milk flask and lid, and the cover to the central spout are dishwasher safe. Before use: ^ It is very important to programme the water hardness level into the machine to prevent limescale building up too quickly. See "Settings: Water hardness" in the Operating instruction booklet. Regular maintenance: ^ Follow all maintenance instructions that appear in the display.
Clean the milk pipework at the end of the day ^ Select "Clean ^ Select "Maintemilk pipework" nance" G, and and touch the touch the OK OK sensor. sensor. ^ Select "Start" and ^ Follow the instructions in the touch the OK display. sensor.
Clean the brew unit ^ Press button a under the handle and turn the handle to the left b. ^ Press brew unit catch c downwards and pull the brew unit out. Display message "Please start the cleaning programme" (= degrease the brew unit) ^ Pull the cover to the ground coffee chute off. ^ Go to "Maintenance" G ... "Clean brew unit" and select "Start" to run the cleaning programme. ^ Place a cleaning tablet in the chute close the lid and follow the instructions in the display. Descaling the machine (approx.
