User Manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the appliance
- Controls and display
- Accessories
- Operating principles
- Before using for the first time
- Water hardness
- Filling the water container
- Filling the coffee bean container
- Switching on and off
- Adjusting the central spout to the correct cup height
- Making drinks
- Grinder setting
- Amount of coffee, brew temperature and pre-brewing
- Portion size
- User profiles
- Settings
- Cleaning and care
- Cleaning intervals - Quick guide
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Waste container, drip tray and drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Central spout
- Milk pipework
- Bean container and ground coffee chute
- Cleaning the housing
- Opening the menu
- Rinsing the appliance
- Rinsing the milk pipework
- Cleaning the milk pipework using the maintenance programme
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Transporting the machine
- Problem solving guide
- After sales service and warranty
- Saving energy
- Electrical connection
- Installation
- Appliance dimensions
- Technical data
Cleaning and care
46
Release the upper section with the
holder for the milk pipework from the
dispensing spouts.
Clean all parts thoroughly.
Clean the surfaces of the central
spout and the dispensing spouts with
a damp cloth.
If the milk pipework connecting pieces
are blocked, clean them under running
water with the brush supplied:
Insert the brush into the connecting
piece. Move it back and forth until all
milk residue has been removed.
Reassembling the central spout
The dispensing unit is easier to
reassemble if the individual parts are
dampened with water beforehand.
Reassemble the dispensing unit.
Refit the dispensing unit onto the
central spout. Press firmly to ensure
the dispensing unit is securely fitted
without any gaps.
Replace the stainless steel cover and
connect the milk pipework if required.