Operating instructions Freestanding coffee machine To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time. en - GB M.-Nr.
Packaging material / Disposal of old machine Packaging material Disposing of your old machine The packaging material used protects the machine during transportation. Electrical and electronic appliances often contain valuable materials. They also contain materials which, if handled or disposed of incorrectly, could be potentially hazardous to human health and to the environment. They are, however, essential for the correct functioning of your appliance.
Contents Packaging material / Disposal of old machine . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Guide to the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Controls and display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Calling up a profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Creating a profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Select profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Descaling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Transporting the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Evaporating the coffee machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Packing the machine . . . . . . . . . . . . .
Warning and Safety instructions This coffee machine complies with current safety requirements. Improper use can, however, present a risk of both personal injury and material damage. To avoid the risk of accidents and damage to the machine, please read these instructions carefully before using it for the first time. They contain important notes on setting it up, as well as on its safety, operation and maintenance.
Warning and Safety instructions Correct application ~ This coffee machine is intended for use in domestic households and similar working and residential environments. Examples of a working or residential environment include – shops, offices and other working environments, – small businesses, showrooms etc., – where the coffee machine is being used by customers in hotels, motels, bed and breakfast and other similar establishments. ~ This coffee machine is not intended for outdoor use.
Warning and Safety instructions Safety with children , The coffee and dispensers present a danger of burning or scalding. Children's skin is far more sensitive to high temperatures than that of adults. Ensure children do not touch hot surfaces of the coffee system or place parts of their body under the dispensers. ~ Place the coffee machine where it is out of the reach of children. ~ Children under eight years of age must be kept away from the machine and the mains connection cable and plug/socket.
Warning and Safety instructions Technical safety ~ A damaged coffee machine is dangerous. Check it for any visible damage before setting it up. Never attempt to use a damaged coffee machine. ~ Before connecting the coffee machine to the mains supply, make sure that the rating on the data plate corresponds to the voltage and frequency of the household supply. This data must correspond in order to avoid the risk of damage to the machine. Consult a qualified electrician if in any doubt.
Warning and Safety instructions ~ The coffee machine must not be used in mobile installations such as ships. ~ Only use the coffee machine in rooms where the ambient temperature is between 10 °C and 38 °C. ~ Danger of overheating. Ensure that there is sufficient ventilation around the coffee machine. Do not cover it with tea towels etc. whilst it is in use. ~ If the coffee machine is installed behind a kitchen furniture door, it may only be used with the furniture door open.
Warning and Safety instructions ~ The machine must be disconnected from the electricity supply during repair work. ~ Disconnect the coffee machine from the power supply if it is not going to be used for a while. ~ Only use genuine original Miele accessories with this machine. Using spare parts or accessories from other manufacturers will invalidate the guarantee, and Miele cannot accept liability. Correct use , The spouts present a danger of burning or scalding.
Warning and Safety instructions ~ Clean the coffee machine thoroughly before using for the first time (see "Cleaning and care"). ~ To avoid the risk of damage to the machine please note the following regarding water: – Fill the water container with fresh, cold tap water only. Hot or warm water or other liquids could damage the coffee machine. – Change the water every day to prevent a build-up of bacteria. – Do not use mineral water.
Warning and Safety instructions ~ Only use milk without additives. Additives in milk usually contain sugar and this will stick to the milk pipework. ~ If using dairy milk make sure that it has been pasteurised. ~ Do not place any alcohol mixtures which are alight underneath the central spout. The flames could ignite plastic components and cause them to melt. ~ Do not use naked flames, e.g. a candle on or near the coffee machine. The coffee machine could catch fire with the risk of the fire spreading.
Warning and Safety instructions ~ Degrease the brew unit regularly with Miele cleaning tablets. Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly. ~ Used coffee grounds should be disposed of with the organic rubbish or on the compost heap. Do not empty them down the sink, as they could block it. ~ The machine must not be used for cleaning objects.
Guide to the machine a Master switch (bottom left) j Central spout with cappuccinatore b Hot water spout* k Park position for milk pipework (behind the service panel) c Controls and display d Cup heating* e Water container f Ground coffee chute g Coffee bean container h Grinder setting (behind the service panel) l Drip tray with lid and waste container m Milk tube aperture n Holder for drip tray and drip tray cover o Stainless steel milk flask* i Brew unit (behind the service panel) * CM 6310 15
Controls and display a On/Off - For switching the coffee machine on and off b Drink sensors For making . Espresso / Coffee H Cappuccino k Latte macchiato c Display Shows information about the current action or status d Back # For returning to the previous menu, cancelling unwanted actions e Arrow sensors Y X For displaying further options and highlighting a selection.
Accessories The following accessories are included with your coffee machine depending on model: – Measuring scoop for ground coffee – Stainless steel milk flask MB-CM* for keeping milk cool for longer (capacity 0.
Before using for the first time Language Before using the coffee machine for the first time, please read these instructions and make yourself familiar with the appliance and its controls. ^ Use the arrow sensors to highlight the required language. Then touch OK. ^ Use the arrow sensors to highlight the required country. Then touch OK. Before using for the first time The setting is now saved. ^ Set up the coffee machine and remove any protective film (see "Installation").
Before using for the first time Water hardness Measuring water hardness The water hardness level indicates how much calcium is dissolved in the water. The higher the calcium content, the harder the water, and the harder the water, the more often the coffee machine will need to be descaled. You can measure the water hardness yourself using the enclosed test strip. Alternatively, your local water authority will be able to tell you the hardness of water in your area.
Operation To operate the coffee machine, touch the sensors with your finger. You are in the drinks menu when the display shows: To select an option ^ Touch the X and Y arrow sensors until the option you want is highlighted. To confirm your choice: { Miele ^ Touch OK. Select drink Exiting a menu or cancelling an action To exit the current menu: To make a drink, touch one of the drinks sensors. You can find more drinks in the " Further programmes" x menu.
Filling the water container The quality of the water plays an important part in the quality of the coffee. Warning. Bacteria can cause infection. It is important to empty and fill the container with fresh tap water every day to avoid the risk of bacteria building up. Hot or warm water or other liquids can damage the coffee machine. Do not use mineral water in the water container. It will cause serious limescale deposits to build up in your machine and damage it. ^ Press the lid on the right hand side.
Filling the coffee bean container Fill the coffee bean container with roasted coffee beans if you want to use freshly ground coffee beans for each cup of espresso or coffee. Alternatively, you can make coffee or espresso with ready ground coffee (see "Making coffee or espresso using ready ground coffee"). Warning. Only put roasted coffee beans in the container. Anything else, including ground coffee, will damage the grinder. Warning. Sugar will damage the coffee machine.
Switching on and off Switching on Switching off Switch the master switch on the left hand side of the machine to the "I" position. ^ Touch the On/Off sensor -. ^ Touch the On/Off sensor -. If the coffee machine has been used for making a drink it will rinse itself before switching off. The appliance will begin rinsing after the heating-up phase. Hot water will come out of the central spout. If a drink has been made using milk, the message "Place milk pipework in drip tray" will appear in the display.
Cup heating (CM 6310) To switch cup heating on or off Cups should always be pre-heated to allow the flavour of the coffee to develop and be retained. The smaller the volume of the coffee/espresso and the thicker the cup, the more important it is to pre-heat the cup. ^ Touch X. You can use the cup heating surface on the top of the coffee machine to pre-heat coffee cups and glasses. The cup heating function must be switched on.
Adjusting the central spout to the correct cup height You can adjust the central spout to suit the height of the cup you are using so that the coffee or espresso will not cool down as quickly and the crema will have a better consistency. ^ Pull the central spout down to the same level as the rim of the cup. or ^ Push the spout up until there is enough room to fit the cup or mug underneath.
Making drinks The following drinks can be made: Espresso or coffee Ristretto is a concentrated, strong espresso. It is made with the same quantity of ground coffee as for an espresso, but with very little water. Espresso is a strong, aromatic coffee with a thick hazelnut brown coloured layer of froth - known as the crema - on top. When making espresso, use espresso roast coffee beans. Coffee differs from espresso in the roast of the beans and the larger amount of water added.
Making drinks To make two portions Cancelling preparation You can dispense two portions into one cup or dispense two portions into two cups at the same time. To cancel preparation: To fill two cups at the same time: ^ Touch the drinks sensor or x for drinks from "Further programmes" again. Tip: Drink preparation can be cancelled by pressing the OK sensor as soon as "Stop" appears in the display. When making coffee with milk or two portions of a drink you can cancel each stage individually. ^ Touch OK.
Making drinks Making coffee with ground coffee To make drinks using ready ground coffee, add a portion of ground coffee to the ground coffee chute. This gives you the option of preparing a cup of decaffinated coffee, for example, even though the coffee bean container is filled with regular roasted coffee beans. The coffee machine will recognise automatically that ready ground coffee has been added to the ground coffee chute. Only one portion can be made at a time when using ready ground coffee or espresso.
Making drinks Making coffee with ready ground coffee If you want to make a drink with ready ground coffee: ^ Select "Yes" and touch OK. You can now select which type of drink you would like to make with ready ground coffee. ^ Place a cup under the central spout. ^ Select the drink you want. The coffee machine will now make the drink you have chosen. If you do not want to make a drink with ready ground coffee: ^ Select "No" and touch OK. The ground coffee will be directed into the waste container.
Making drinks The following drinks with milk can be made: Cappuccino consisting of approx. 2/3 milk froth and 1/3 espresso. Latte macchiato consisting of 1/3 each of hot milk, milk froth and espresso. ^ Fill the milk flask up to max. 2 cm below the rim with milk. Seal the milk flask with the lid. ^ Connect the stainless steel angled end of the milk pipework to the top of the lid until it clicks into place. Caffè latte consisting of hot milk and coffee. Hot milk or milk froth can also be made.
Making drinks You can use bottled milk or cartons. Making drinks with milk ^ Place a suitable container underneath the central spout. ^ Touch the sensor for the drink you want: The milk tube for cartons and other suitable containers is located behind the machine front. H Cappuccino k Latte macchiato x in "Further programmes": Caffè Latte, hot milk or milk froth The selected drink will now be made. ^ Connect the milk tube to the aperture in the central spout.
Making drinks Dispensing hot water Making drinks using a profile (CM 6310) You can enter individual profiles to cater for different tastes and preferences (see "Profiles"). ,Danger of burning and scalding on the hot water spout. The water dispensed is very hot. Please note that the water dispensed is not hot enough for making black tea. If you have already created your own profile, you can select this to make a drink according to your own tastes. ^ Touch {.
Coffee the way you like it You can customise your coffee machine to suit the type of coffee you are using. The "Parameters" menu , allows you to adjust the amount of coffee that is ground, set the brew temperature and deselect the "Pre-brewing" option. The parameters for each type of coffee can be individually specified in the Miele profile and in any other profiles you have created. The grinder can also be set to suit the type of coffee beans being used.
Coffee the way you like it ^ Empty the drip tray and the waste container. ^ Make one cup of coffee. Adjust the grinder setting again. The altered grinder setting will not be used until after the second coffee has been dispensed. Amount of coffee The coffee machine can grind and brew 6-14 g of coffee per cup. The greater the quantity, the stronger the coffee. There are various ways to tell whether the amount of coffee is set correctly.
Coffee the way you like it Brew temperature Pre-brewing The ideal brewing temperature will depend on When the pre-brewing function is switched on, the freshly ground coffee is first moistened with a little hot water. Then the remaining water is forced through the moistened coffee at high pressure. This helps release the flavour of the coffee. – the type of coffee being used, – whether an espresso or a coffee is being made, and – the altitude of the region.
Portion size The flavour of the coffee produced depends not just on the type of coffee used, but also on the amount of water used. You can programme the amount of water to suit the size of your cups and the type of coffee you are using. For coffee drinks that use milk you can also set the amount of milk or milk froth to be dispensed. You can also set the portion sizes for hot milk and milk froth alone. Each type of drink has a maximum portion size that can be programmed into the machine.
Portion size Portion sizes for cappuccino and latte macchiato ^ Place a suitable container underneath the central spout. ^ Touch H or k until the ingredients for that drink are shown in the display. Portion sizes for ristretto, long coffee, caffè latte, hot milk and milk froth ^ Place a suitable container underneath the central spout. ^ Touch ,. Cappuccino: milk froth, espresso ^ Select the drink you want. Latte macchiato: hot milk, milk froth, espresso ^ Select "Portion size" and touch OK.
Portion size Changing portion sizes in the "Parameters" menu , Changing the portion size for different profiles ^ Touch ,. You can set the portion size for individual drinks for each profile. ^ Select the drink you want and touch OK. ^ Touch {. ^ Select "Portion size" and touch OK. ^ Select the profile you want. Now proceed as for changing the portion size during drink preparation The name of the current profile is shown in the top left of the display.
Profiles You can add individual profiles to cater for different tastes and preferences in addition to the Miele standard profiles. For each profile you can change the settings for each drink (portion size, grinder setting, brew temperature and pre-brewing). The name of the current profile is shown in the top left of the display. Calling up a profile ^ Touch {. You can now "Create a profile".
Profiles Select profile This option is only possible if a profile has been allocated in addition to the Miele standard profile. ^ Touch "Select profile" and touch OK ^ Select the profile you want and touch OK. The name of the profile is shown in the top left of the display. Delete profile This option is only possible if a profile has already been created in addition to the standard Miele profile. The standard Miele profile cannot be deleted. ^ Select "Delete profile" and touch OK.
Profiles Changing a profile You can programme the coffee machine so that it changes back to the Miele standard profile automatically after each drink is dispensed, so that the Miele profile is always active when the machine is switched on or so that it retains the most recently selected profile. ^ Select "Change profile" and touch OK. You now have the following options: – Manually: The selected profile will be retained until you select another profile.
Settings You can use the "Settings" menu to customise the coffee machine to suit your requirements. Changing and saving settings ^ Touch X. The settings apply to all profiles. ^ Select the required setting with the arrow sensors and touch OK. Opening the "Settings" menu ^ Use the arrow sensors to highlight the required option. ^ Touch X. You can now check or change the settings. Options which are currently selected will have a tick ( next to them. Touch # if you want to access the previous menu.
Settings Overview of available settings The factory setting for each option is shown in bold.
Settings Language Timer You can select a language and country for all display texts. The timer offers the following options: Tip: If you select the wrong language by mistake, you can find the "Language" option by following the flag symbol J. Time You can set the clock display and the time of day. Clock display The options are: – 24-hour display (24 h) – 12-hour display (12 h) Setting the time Use the arrow sensors to set the hours and minutes. The coffee machine – switches on at a particular time, e.
Settings Switch off at Eco mode Use the arrow sensors to set the hours and minutes. The Eco mode is an energy-saving mode. In the event of a longer absence the programmed times will remain in memory and will be reactivated after manually switching the machine on again. If Eco mode is switched on, the coffee machine heats up anew before each drink preparation, making preparation times longer.
Settings Info (display information) Water hardness In the "Info" option, the number of portions prepared for each individual drink can be displayed. See "Setting up and using the coffee machine" for information about water hardness. You can also see whether more than 50 portions can be dispensed before the machine needs to be descaled ("No. of portions until descaling") or before the brew unit needs to be degreased ("No. of portions until degreasing"). To return to the previous display: ^ Touch OK.
Settings Factory default You can reset the settings back to the ones which were set when the coffee machine was delivered. Please refer to the "Possible setting options" chart for the factory settings which are shown in bold. Please note that the following settings will not be reset: - Language - Time - Number of drinks dispensed (Info) Showroom programme (Demo mode) Do not activate this setting for domestic use! The coffee machine can be demonstrated in the showroom using the "Showroom programme".
Cleaning and care Quick guide ,Clean the coffee machine regularly to avoid a build-up of bacteria.
Cleaning and care ,Danger of burning and scalding on hot components or by hot liquids. Always allow the coffee machine to cool down before cleaning it. Caution. Water in the drip tray can be very hot. Do not use a steam cleaner to clean the coffee machine. Steam could cause a short circuit.
Cleaning and care Milk pipework Ensure that all components in which milk is transported are cleaned on a regular basis. Milk naturally contains bacteria that rapidly multiply if the milk pipework is not cleaned properly. Soiling in the appliance may be dangerous to health. Rinsing the milk pipework Milk residue can clog up the milk pipework. If a drink has been made using milk the coffee machine will prompt you to rinse the pipework when you switch the machine off.
Cleaning and care Cleaning the milk pipework using the cleaning programme Carrying out the cleaning process: The cleaning process cannot be cancelled once it has started. The process has to be completed through to the end. ^ Touch x. ^ Select "Maintenance" and touch OK ^ Select "Clean milk pipework" and touch OK. The process will start. ^ Follow the instructions in the display. When the message "Place milk pipework in cleaning agent" appears in the display dissolve the cleaning agent in water.
Cleaning and care Central spout with cappuccinatore Clean the central spout cover by hand only using warm water and a little washing-up liquid. All other parts are dishwasher safe. ^ Twist upper section a with the holder for the milk pipework and pull it off. Then pull the Y-shaped piece b off. Release the spouts c. ^ Clean all parts thoroughly. ^ Push the central spout right down and remove the stainless steel cover by pulling it off towards you.
Cleaning and care If the milk pipework is blocked, clean it under running water with the brush supplied. Milk flask ^ Insert the brush in the tube and move it back and forth as far as it will go until all milk residue has been removed. The milk flask should be taken apart and cleaned every day. ^ Fit the dispensing unit back together. ^ Push the dispensing unit back onto the central spout. Press firmly to ensure the spouts at the bottom connect correctly with the edge of the dispenser.
Cleaning and care Water container Drip tray cover Clean the water container lid by hand only using hot water and a little washing-up liquid. ^ Remove the drip tray cover from the drip tray. Change the water every day to prevent a build-up of bacteria. Make sure that the valve, the underside of the water container and the surface the water container sits on are clean. Otherwise the water container will not sit correctly.
Cleaning and care Drip tray and waste container ^ Push the central spout up as far as it will go. Clean the drip tray and waste container every day to avoid unpleasant smells and mildew. The waste container is located in the drip tray. Water from rinsing also collects in the waste container. A prompt will appear in the display when the drip tray and/or the waste container is full and needs to be emptied. Empty the drip tray and the waste container. Danger of burning.
Cleaning and care Bean container and ground coffee chute ,Disconnect the coffee machine from the power supply before cleaning. Tip: Use a vacuum cleaner to remove any coffee residues from the bean container and the ground coffee chute. ^ Open the bean container. ^ Remove any coffee beans. ^ Clean the bean container with a dry, soft cloth. Brew unit ,Disconnect the coffee machine from the power supply before cleaning. Clean the brew unit by hand only using hot water.
Cleaning and care If you cannot remove the brew unit or can only do so with difficulty, the brew unit is not in the correct position (See "Problem solving guide"). After taking the brew unit out of the machine do not change the position of the brew unit handle, as this would cause the brew unit to be out of alignment and you will not be able to push it back into the coffee machine. Make sure you regularly remove any damp ground coffee residues to prevent the build-up of mould.
Cleaning and care Degreasing the brew unit Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly. It must be degreased regularly in order to ensure aromatic coffee and trouble-free operation of the coffee machine. When "Place a cleaning tablet in the ground coffee chute and close the chute" appears in the display: We recommend using Miele cleaning tablets to clean the brew unit.
Cleaning and care Housing External surfaces may suffer discolouration or damage if soiling is left on them for too long. Remove soiling immediately. Make sure that water cannot get behind the display. All external surfaces are susceptible to scratching and can suffer discolouration if they come into contact with unsuitable cleaning agents. Wipe up any spillages or splashes of descaling agent immediately. ^ Switch the coffee machine off.
Descaling When descaling the machine, cover delicate surfaces and natural flooring to prevent damage from splashes of descaling solution. Ensure that any splashes of descaling solution are wiped up immediately. Limescale builds up in the coffee machine through use. How often the machine needs to be descaled will depend on the water hardness level in your area. It should be descaled regularly to ensure that it functions correctly. The machine will guide you through the descaling process.
Descaling Miele descaling tablets are available to order from Miele or via the internet at www.miele-shop.com. When "Rinse the water container and fill with fresh water to the F symbol" appears, You will need 1 descaling tablet to descale the machine. ^ Carefully rinse the water container with clean water. Ensure that no descaling solution residue remains in the water container. Fill the water container to the F symbol with fresh tap water.
Problem solving guide Most problems that occur during daily use can be easily corrected. With the help of the following guide, you will be able to find the causes of problems and rectify them. ,Important! Do not open the outer casing of the machine. Repairs must only be carried out by a Miele approved service technician. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. If you can't remedy the problem yourself, please call Miele.
Problem solving guide Message Possible cause and remedy "Too much ground There is too much ready ground coffee in the ground coffee coffee" chute. If more than one level scoop of ground coffee is added to the coffee chute, the brew unit cannot process the coffee. The ground coffee will be directed into the waste container and the fault message will appear in the display. ^ Switch the machine off with the On/Off - sensor. ^ Remove and clean the brew unit (see "Cleaning and care – Brew unit").
Problem solving guide Message Possible cause and remedy F73 or "Check the brew unit" The brew unit cannot be positioned correctly. ^ Switch the machine off with the On/Off - sensor. ^ Remove and clean the brew unit (see "Cleaning and care – Brew unit"). ^ Push the coffee ejector of the brew unit into the correct position (see diagram). ^ Do not fit the brew unit. Close the front of the machine and switch the machine on with the On/Off - sensor.
Problem solving guide Unusual performance of the coffee machine Problem Possible cause and remedy CM 6310: The lighting remains off after the coffee machine has been switched on. The lighting has been switched off. ^ Switch the lighting on (see "Settings - Lighting"). The display remains dark after the coffee machine has been switched on using the On/Off - sensor. The On/Off - was not touched for long enough. ^ Touch the On/Off - sensor for at least 3 seconds. The lamp is defective.
Problem solving guide Problem Possible cause and remedy The sensors do There is an internal fault. not react to touch. ^ Set the master switch to the "0" position. The appliance ^ Disconnect the machine from the electricity supply by cannot be switching off at the wall socket and withdrawing the plug, operated. or switching off the mains fuse. The coffee machine does not switch itself on, although the "Switch on at" setting has been activated for the timer. The system lock has been activated.
Problem solving guide Problem Possible cause and remedy Neither milk nor milk froth comes out of the central spout. The milk pipework is blocked. ^ Clean the central spout, taking particular care to clean the cappuccinatore and milk pipework carefully with the cleaning brush. "Empty the drip tray and the waste container" appears in the display, even though the drip tray is empty. The drip tray is not positioned correctly in the machine. ^ Push the drip tray in as far as it will go.
Problem solving guide Problem Possible cause and remedy Drink preparation If the water container becomes empty while a drink is being has been made, the message "Water container empty. Continue? Yes / cancelled. No" will appear in the display after the water container has been refilled and put back in the machine. If you do not confirm this message with "Yes" within 5 minutes, preparation will be cancelled. This is not a fault.
Problem solving guide Problem Possible cause and remedy Coffee dispensing is repeatedly interrupted and the message "Fill the coffee bean container" appears in the display. This is not a fault. The brew unit has not detected the ground coffee. The coffee may be too finely ground or there may not be enough of it. Usually this is because the grinder is set too fine and the amount set is insufficient. ^ Confirm the message with OK.
Problem solving guide Problem Possible cause and remedy The descaling programme was started by mistake. The descaling programme cannot be stopped once the OK sensor has been touched. Descaling must be continued through to completion. This is a safety precaution to make sure the machine is descaled correctly. Loud noises are heard during the descaling programme. This is not a fault. These noises occur when water is flushed through the machine at a high pressure.
Problem solving guide Problem Possible cause and remedy After switching the machine on a message appears prompting you to empty the drip tray and the waste container even though they are empty. This is not a fault. The drip tray and waste container were probably not emptied after making the last coffee, or the internal counter was not reset. ^ Remove the drip tray and waste container from the machine and empty them.
Problem solving guide Unsatisfactory results Problem Possible cause and remedy The consistency of The milk temperature is too high. Good milk froth can only the milk froth is be achieved when cold milk (below 13°C) is used. unsatisfactory. ^ Check the temperature of the milk. The milk pipework is blocked. ^ Clean the central spout with integrated cappuccinatore and the milk pipework with the cleaning brush.
Problem solving guide Problem Possible cause and remedy The crema on the The grinder setting is not correct. coffee or espresso ^ Set the grinder to a finer or coarser setting (see "Setting is not as it should the coffee grinder"). be. The brewing temperature is too high for this type of coffee. ^ Set a lower brewing temperature (see "Brewing temperature"). The coffee beans are stale. ^ Add fresh coffee beans to the coffee bean container.
Transporting the machine If you are not going to use the coffee machine for an extended period of time, e.g. whilst on holiday, or if it needs to be moved, a number of procedures will need be carried out to ensure its safety. Please carry out the following: ,Caution. Danger of burning and scalding from hot steam coming out of the hot water spout. The evaporation process is finished when "Process finished" appears in the display.
After Sales / Guarantee In the event of a fault which you cannot correct yourself, or if the machine is under guarantee please contact: – your Miele Dealer or – Miele Contact details for Miele are given at the end of this booklet. N.B. A call-out charge will be applied to service visits where the problem could have been resolved as described in these instructions. When contacting Miele, please quote the model and serial number of your machine.
Saving energy If the default settings for "Eco mode" or the "Timer" have been altered, energy consumption will increase. The message "This setting uses more energy" will appear in the display. Pre-heating cups with hot water If you only want to pre-heat your cups occasionally, you can switch the cup heating surface off (only applies for the CM 6310). You can then use hot water to pre-heat the cups. 76 Switch the machine off with the master switch and at the wall socket.
Electrical connection All electrical work should be carried out by a suitably qualified and competent person only, in strict accordance with current national and local safety regulations (BS 7671 in the UK). Installation, repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. Ensure power is not supplied to the machine until after installation work has been carried out.
Installation Please observe the following installation instructions: Danger of overheating. Please ensure that there is adequate ventilation around the machine. Do not cover the machine with tea towels or similar objects whilst it is in use. Danger of overheating. If the coffee machine is installed behind a kitchen furniture door, it may only be used with the furniture door open. Do not close the furniture door while the coffee machine is in use.
Appliance dimensions 79
Technical data Current draw in standby mode < 0.5 Watt (default setting) Pump pressure: max. 15 bar Through-flow heater: 1 stainless steel thermo block Appliance dimensions (W x H x D ) : 251 x 359 x 427 mm Net weight 9.9 kg Connection cable length: 140 cm Water container capacity: 1.8 l Bean container capacity: 300 g Stainless steel milk flask capacity*: 0.5 l Waste container capacity: max.
United Kingdom Miele Co. Ltd. Fairacres, Marcham Road Abingdon, Oxon, OX14 1TW Customer Contact Centre Tel: 0330 160 6600 E-mail: mielecare@miele.co.uk Internet: www.miele.co.uk Australia Miele Australia Pty. Ltd. ABN 96 005 635 398 1 Gilbert Park Drive, Knoxfield, VIC 3180 Tel: 1300 464 353, Fax: (03) 9764 7149 Internet: www.miele.com.au China Miele (Shanghai) Trading Ltd. 1-3 Floor, No.
CM 6110, CM 6310 en - GB M.-Nr.
