Installation Plan Tumble dryer PT 7186 EL (Electrically Heated) en - US 18.
U.S.A. Miele, Inc. National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-991-9380 609-419-4241 Fax: www.mieleusa.com Technical Service & Support Nationwide Phone: 800-991-9380 Fax: 800-220-1348 proservice@mieleusa.com It is essential to read the operating and installation instructions before installing, commissioning or using the machine. This avoids the risk of accidents or damage.
27 3/16 1 3/4 12 40 3/16 30 1/16 12 13 3/4 12 12 52 3/16 17 5/16 3/4 20 7/8 12 27 1/4 40 3/16 3/4 28 3/8 21 1/4 27 9/16 43 5/16 27 9/16 3/4 27 1/4 30 1/16 3/4 27 3/16 27 1/4 17 5/16 13 3/4 40 3/16 27 3/16 28 3/8 43 5/16 PT 7186 EL - measurements in inches 3
3 5/8 12 12 5 13/16 PT 7186 EL - measurements in inches 3 5/8 51 3/16 3 15/16 51 3/16 12 3 5/8 5 13/16 23 5/16 3 5/8 51 3/16 3 15/16 51 3/16 23 5/16 4
Option: Installation on Miele base (US) 22 1/16 27 10 13/16 12 1/4 24 5/8 17 5/16 13/16 43 5/16 24 3/4 27 27 1/8 43 1/4 27 1/4 21 5/8 2 13/16 3 15/16 26 7/8 27 1/4 17 3/8 12 12 5/8 13/16 39 3/8 40 3/16 Option: Installation on Miele base (UG/UO) 2 13/16 2 2 1/2 1 5/8 1/2 PT 7186 EL - measurements in inches 1/4 5
Standard installation 17 3/8 3/4 11 3/4 3/4 40 1/8 40 1/8 Option: Installation on concrete platform (BS) 21 5/8 3 39 3/8 21 5/8 2 3/4 4 27 1/8 10 7/8 4 10 7/8 3 27 1/4 43 1/4 22 27 1/2 43 1/4 27 1/2 2 3/4 1 5/8 1/4 PT 7186 EL - measurements in inches 2 2 1 5/8 1/4 6
PT 7186 EL - measurements in millimeters 7
PT 7186 EL - measurements in millimeters 8
Option: Installation on Miele base (UG/UO) PT 7186 EL - measurements in millimeters Option: Installation on Miele base (US) 9
Option: Installation on concrete platform (BS) PT 7186 EL - measurements in millimeters Standard installation 10
Technical datasheet Tumble dryer: Heating: PT 7186 Electric (EL) Legend: en - US Abbreviations in bold type: Connection required Abbreviations in circle with dashes: Connection optional or required depending on model version Optional extras: UM BS Miele base Concrete base UO 6008 (UO = open base ) Height Width Depth 12'' 26 15/16'' 27 1/16'' 305 mm 684 mm 687 mm UG 6008 (UG = closed base) Height Width Depth 12'' 27 1/4'' 27 1/16'' 305 mm 692 mm 688 mm US 6008 (US = base with drawer) Height
Electrical connection must comply with national regulations. Connection using multi-pole lockable wall socket in compliance with IEC/EN 60309 and IEC/EN 60947 is recommended in order to simplify electrical tests. If machines are hard-wired, a multi-pole mains switch must be provided on site. Switches with a contact gap of more than 3 mm can be used. These include switches, fuses and contactors (IEC/EN 60947). A wall socket or mains isolator must be easily accessible after installation.
Machine data Unit width Unit depth Unit height Casing width Casing depth 27 9/16'' 30 1/16'' 40 3/16'' 27 1/4'' 27 3/16'' 700 mm 763 mm 1020 mm 692 mm 690 mm Minimum width of delivery access to installation site Recommended rear wall gap (measured to front of machine) Minimum rear wall gap (to front of machine) Recommended rear wall gap ensures sufficient space for maintenance and servicing. 28 3/8'' 43 5/16'' 35 7/16'' 720 mm 1100 mm 900 mm Net weight 170 lbs 77 kg Dynamic floor load, max.
