Operating and Installation Instructions

Before first use
54
Before first use
Allow the appliance to stand for ap-
prox. 1hour prior to connecting it to
the power supply.
This will help prevent any malfunc-
tions.
Packaging material
 Remove all packaging material from
the inside of the appliance.
Leftover tape residue.
Always remove all packaging mate-
rial, including adhesive tape, before
switching on the appliance.
Cleaning
Please refer to the relevant instruc-
tions in “Cleaning and care”.
 Clean the inside of the appliance and
the accessories.
Choosing the right Door Assistant
(Push2Open/Pull2Open)
The Door Assistant helps you to open
the appliance door.
You can choose between the two Door
Assistants Push2Open and Pull2Open
(see “Switching on Door Assistant ” in
“Selecting additional settings”).
The default Door Assistant is
Push2Open.
 Select the
Pull2Open Door Assistant if your appli-
ance has a cabinet front with a han-
dle.
 Select the
Push2Open Door Assistant if your ap-
pliance has a handle-free cabinet
front.
Sticking on the MasterFresh zone la-
bels
The labels supplied for the two com-
partments in the MasterFresh zone
help you to choose the right type of
food to ensure ideal storage condi-
tions.
Please note that the refrigeration ap-
pliance must be switched off when
sticking on the labels, as the labels will
not adhere to a cold surface. Further-
more, there should not be any dust or
grease on the surface.
 Stick the labels on as described be-
low:
– Humidity-controlled compartment
for fruit and vegetables
 Remove the label from the foil and
stick it onto the frame of the humid-
ity-controlled compartment (see
“Product description”).
– Dry compartment for food which
goes off quickly