User Manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the appliance
- Caring for the environment
- -
- Connection
- Using the supplied accessories
- Use
- Setting down and storing the vacuum cleaner
- Maintenance
- Cleaning and care
- Problem solving guide
- Service
- Optional accessories
- Purchasing accessories
- Floorheads / brushes
- TurboTeQ Turbobrush (STB 305-3)
- Parquet Twister floorbrush with swivel action (SBB 300-3)
- Parquet Twister XL floorbrush with swivel action (SBB 400-3)
- Other accessories
- Turbo Mini hand turbobrush (STB 101)
- Universal brush (SUB 20)
- Radiator brush (SHB 30)
- Mattress nozzle (SMD 10)
- Crevice nozzle, 300 mm (SFD 10)
- Crevice nozzle, 560 mm (SFD 20)
- XL upholstery nozzle (SPD 20)
- Electrical connection
13
Remove the indicator strip from the
HEPA AirClean exhaust filter.
Press the timestrip® filter change in-
dicator on the HEPA AirClean exhaust
filter.
After approx. 10–15 seconds, a thin red
line will appear in the left-hand side of
the display.
Fit the exhaust filter compartment
flap carefully in the bottom of the ex-
haust filter compartment and close
the flap, making sure it clicks into po-
sition.
How the exhaust filter timestrip®
change indicator works
The exhaust filter timestrip® change in-
dicator shows the remaining functional
life of the exhaust filter. After approx. 50
operating hours the display will be com-
pletely filled with red. 50 operating
hours equates to approximately one
year of use.