Operating instructions Freestanding coffee machine To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time. en - GB M.-Nr.
Packaging material / Disposal of old machine Packaging material Disposing of your old machine The packaging material used protects the machine during transportation. Electrical and electronic appliances often contain valuable materials. They also contain materials which, if handled or disposed of incorrectly, could be potentially hazardous to human health and to the environment. They are, however, essential for the correct functioning of your appliance.
Contents Packaging material / Disposal of old machine . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Guide to the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Controls and display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Calling up a profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Creating a profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Select profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Descaling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Transporting the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Evaporating the coffee machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Packing the machine . . . . . . . . . . . . .
Warning and Safety instructions This coffee machine complies with current safety requirements. Improper use can, however, present a risk of both personal injury and material damage. To avoid the risk of accidents and damage to the machine, please read these instructions carefully before using it for the first time. They contain important notes on setting it up, as well as on its safety, operation and maintenance.
Warning and Safety instructions Safety with children , There is a danger of burning and scalding from the coffee and hot water dispensing spouts. Children's skin is far more sensitive to high temperatures than that of adults. Ensure children do not touch hot surfaces of the coffee machine or place parts of their body under the dispensing spouts. ~ Place the coffee machine where it is out of the reach of children.
Warning and Safety instructions Technical safety ~ A damaged coffee machine is dangerous. Check it for any visible damage before setting it up. Never attempt to use a damaged coffee machine. ~ Before connecting the coffee machine to the mains supply, make sure that the rating on the data plate corresponds to the voltage and frequency of the household supply. This data must correspond in order to avoid the risk of damage to the machine. Consult a qualified electrician if in any doubt.
Warning and Safety instructions ~ If the coffee machine is installed behind a kitchen furniture door, it may only be used with the furniture door open. Do not close the furniture door while the coffee machine is in use. ~ Protect the coffee machine from water and water spray. Do not immerse the machine in water. ~ Repairs and other work by unqualified persons to the machine and the connection cable could be dangerous. The manufacturer cannot be held liable for unauthorised work.
Warning and Safety instructions Correct use , The spouts present a danger of burning or scalding. The liquids and steam dispensed are very hot. ~ Please note: – Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed. – Do not touch hot components. – Hot liquid or steam could spatter from the spouts. Ensure that the central spout is clean and fitted correctly. – Water in the drip tray can also be very hot. Take care when emptying it.
Warning and Safety instructions ~ Only add ground coffee or cleaning tablets to the ground coffee chute. The cleaning tablets are used for degreasing the brew unit. ~ Only use milk without additives. Additives in milk usually contain sugar and this will stick to the milk pipework. ~ If using dairy milk make sure that it has been pasteurised. ~ Do not place any alcohol mixtures which are alight underneath the central spout. The flames could ignite plastic components and cause them to melt.
Warning and Safety instructions ~ Degrease the brew unit regularly with Miele cleaning tablets. Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly. ~ Used coffee grounds should be disposed of with the organic rubbish or on the compost heap. Do not empty them down the sink, as they could block it. ~ The machine must not be used for cleaning objects.
Guide to the machine a Master switch j Central spout with cappuccinatore b Hot water spout k Park position for milk pipework (behind the service panel) c Controls and display d Cup heating e Water container f Ground coffee chute g Coffee bean container h Grinder setting (behind the service panel) l Drip tray with lid and waste container m Milk tube aperture n Holder for drip tray cover and drip tray cover o Stainless steel milk flask i Brew unit (behind the service panel) 13
Controls and display a On/Off - For switching the coffee machine on and off b Drink sensors For making . Espresso / Coffee H Cappuccino k Latte macchiato c Display Shows information about the current action or status d Back # For returning to the previous menu, cancelling unwanted actions e Arrow sensors Y X For displaying further options and highlighting a selection.
Accessories The following accessories are included with your coffee machine depending on model: – Measuring scoop for ground coffee – Stainless steel milk flask MB-CM for keeping milk cool for longer (capacity 0.5 l) – Cleaning tablets for degreasing the brew unit (starter set) – Descaling tablets for descaling the water pipework (starter set) Miele also offers a range of optional accessories, as well as cleaning and conditioning products for your coffee machine.
Before using for the first time Language Before using the coffee machine for the first time, please read these instructions and make yourself familiar with the appliance and its controls. ^ Use the arrow sensors to highlight the required language. Then touch OK. ^ Use the arrow sensors to highlight the required country. Then touch OK. Before using for the first time The setting is now saved. ^ Set up the coffee machine and remove any protective film (see "Installation").
Before using for the first time Water hardness Measuring water hardness The water hardness level indicates how much calcium is dissolved in the water. The higher the calcium content, the harder the water, and the harder the water, the more often the coffee machine will need to be descaled. You can measure the water hardness yourself using the enclosed test strip. Alternatively, your local water authority will be able to tell you the hardness of water in your area.
Operation To operate the coffee machine, touch the sensors with your finger. You are in the drinks menu when the display shows: To select an option ^ Touch the X and Y arrow sensors until the option you want is highlighted. To confirm your choice: { Miele ^ Touch OK. Select drink Exiting a menu or cancelling an action To exit the current menu: To make a drink, touch one of the drinks sensors. ^ Touch #. You can find more drinks in the " Further programmes" x menu.
Filling the water container The quality of the water plays an important part in the quality of the coffee. Warning. Bacteria can cause infection. It is important to empty and fill the container with fresh tap water every day to avoid the risk of bacteria building up. Hot or warm water or other liquids can damage the coffee machine. Do not use mineral water in the water container. It will cause serious limescale deposits to build up in your machine and damage it. ^ Press the lid on the right hand side.
Filling the coffee bean container Fill the coffee bean container with roasted coffee beans if you want to use freshly ground coffee beans for each cup of espresso or coffee. Alternatively, you can make coffee or espresso with ready ground coffee (see "Making coffee or espresso using ready ground coffee"). Warning. Only put roasted coffee beans in the container. Anything else, including ground coffee, will damage the grinder. Warning.
Switching on and off Switching on Switching off Switch the master switch on the left hand side of the machine to the "I" position. ^ Touch the On/Off sensor -. ^ Touch the On/Off sensor -. If the coffee machine has been used for making a drink it will rinse itself before switching off. The appliance will begin rinsing after the heating-up phase. Hot water will come out of the central spout. If a drink has been made using milk, the message "Place milk pipework in drip tray" will appear in the display.
Pre-heating cups (cup heating) Cups should always be pre-heated to allow the flavour of the coffee to develop and be retained. The smaller the volume of the coffee/espresso and the thicker the cup, the more important it is to pre-heat the cup. You can use the cup heating surface on the top of the coffee machine to pre-heat coffee cups and glasses. The cup heating function must be switched on. ^ Arrange the cups or glasses on the cup heating surface on the top of the coffee machine.
Adjusting the central spout to the correct cup height You can adjust the central spout to suit the height of the cup you are using so that the coffee or espresso will not cool down as quickly and the crema will have a better consistency. ^ Pull the central spout down to the same level as the rim of the cup. or ^ Push the spout up until there is enough room to fit the cup or mug underneath.
Making drinks Espresso or coffee To make two portions You can dispense two portions into one cup or dispense two portions into two cups at the same time. To fill two cups at the same time: ^ Place a cup under the central spout. ^ Touch the sensor for the drink you want: . Espresso ^ Place a cup under each coffee spout. / Coffee ^ Touch °. x in "Further programmes": Long coffee The ° sensor will light up. The coffee or espresso will be dispensed from the central spout into the cup.
Making drinks Cancelling preparation To cancel preparation: ^ Touch the drinks sensor which is lit up, or x for drinks from "Further programmes" again. Tip: Drink preparation can be cancelled by pressing the OK sensor as soon as "Stop" appears in the display. When making coffee with milk or two portions of a drink you can cancel preparation of each stage individually. ^ Touch OK. Preparation will be cancelled.
Making drinks Adding ready ground coffee Use the measuring scoop supplied so that the correct amount is used. Do not add more than one level scoop of ground coffee to the coffee chute. If too much is added, the brew unit will not be able to process the coffee. Making coffee with ready ground coffee If you want to make a drink with ready ground coffee: ^ Select "Yes" and touch OK. You can now select which type of drink you would like to make with ready ground coffee. ^ Place a cup under the central spout.
Making drinks Drinks with milk ,Caution. Danger of burning and scalding from the central spout. Liquids and steam dispensed from the spouts will be very hot. Stainless steel milk flask The stainless steel flask keeps milk cool for longer. Good milk froth can only be made with cold milk (< 13°C). Do not use milk with additives. Most additives contain sugar which will adhere to the milk pipework and damage the machine. As soon as you select a drink containing milk the machine will start to heat up.
Making drinks ^ Place the milk flask on the right hand side of the coffee machine. Connect the other end of the milk tube to the central spout. ^ Place a container with sufficient milk beside the coffee machine on the right hand side. You can use bottled milk or cartons. ^ Place the end of the milk tube in the container making sure that it is sufficiently immersed in the milk. The milk tube for cartons and other suitable containers is located behind the machine front.
Making drinks Preparing hot water ,Danger of burning and scalding on the hot water spout. The water dispensed is very hot. Please note that the water dispensed is not hot enough for making tea. Making drinks using a profile You can enter individual profiles to cater for different tastes and preferences (see "Profiles"). If you have already created your own profile, you can select this to make a drink according to your own tastes. ^ Touch {.
Coffee the way you like it You can customise your coffee machine to suit the type of coffee you are using. The "Parameters" menu , allows you to adjust the amount of coffee that is ground, set the brew temperature and deselect the "Pre-brewing" option. The parameters for each type of coffee can be individually specified. The grinder can also be set to suit the type of coffee beans being used. To avoid damaging the grinder, please note the following: Only adjust the grinder one setting at a time.
Coffee the way you like it Displaying and changing the parameters of a drink ^ Touch ,. The , sensor will light up. ^ Select the drink you want and touch OK. The current settings for the amount of coffee, brewing temperature and pre-brewing will be displayed for this drink. ^ Use the arrow sensors to change the amount. Then touch OK. The setting is now saved.
Coffee the way you like it Pre-brewing When the pre-brewing function is switched on, the freshly ground coffee is first moistened with a little hot water. Then the remaining water is forced through the moistened coffee at high pressure. This helps release the flavour of the coffee. You can set pre-brewing for a normal length of time or an extra long length of time. Alternatively, you can switch off the " Pre-brewing " function. The machine is supplied with the "Pre-brewing" function switched off.
Portion size The flavour of the coffee produced depends not just on the type of coffee used, but also on the amount of water used. You can programme the amount of water to suit the size of your cups and the type of coffee you are using. For coffee drinks that use milk you can also set the amount of milk or milk froth to be dispensed. You can also set the portion sizes for hot milk and milk froth alone. Each type of drink has a maximum portion size that can be programmed into the machine.
Portion size Portion sizes for cappuccino and latte macchiato Portion sizes for caffé latte, hot milk and milk froth ^ Place a suitable container underneath the central spout. ^ Place a suitable container underneath the central spout. ^ Touch H or k until the ingredients for that drink are shown in the display. ^ Touch ,. Cappuccino: milk froth, espresso ^ Select "Portion size" and touch OK.
Portion size Changing portion sizes in the "Parameters" menu , Changing the portion size for different profiles ^ Touch ,. You can set the portion size for individual drinks for each profile. ^ Select the drink you want and touch OK. ^ Touch {. ^ Select "Portion size" and touch OK. ^ Select the profile you want. Now proceed as for changing the portion size during drink preparation The name of the current profile is shown in the top left of the display.
Profiles You can enter individual profiles to cater for different tastes and preferences. For each individual profile you can select the portion sizes for each drink (see "Setting the portion size"). The name of the current profile is shown in the top left of the display. Calling up a profile Creating a profile ^ Select "Create profile" and touch OK. Letters will appear in the display that you can select with the arrow sensors.
Profiles Select profile This selection is only possible if a profile has been allocated in addition to the Miele standard profile. ^ Touch "Select profile" and touch OK ^ Select the profile you want and touch OK. The name of the profile is shown in the top left of the display. Delete profile This option is only possible if a profile has already been created in addition to the standard Miele profile. The standard Miele profile cannot be deleted. ^ Select "Delete profile" and touch OK.
Profiles Changing a profile You can programme the coffee machine so that it changes back to the Miele standard profile automatically after each drink is dispensed, so that the Miele profile is always active when the machine is switched on or so that it retains the most recently selected profile. ^ Select "Change profile" and touch OK. You now have the following options: – Manually: The selected profile will be retained until you select another profile manually.
Settings Changing and saving settings You can use the "Settings" menu to customise the coffee machine to suit your individual requirements. ^ Touch X. Calling up the "Settings" menu ^ Select the required setting with the arrow sensors and touch OK. ^ Touch X. You can now check or change the settings. Options which are currently selected will have a tick ( next to them. ^ Use the arrow sensors to highlight the required option. ^ Touch OK. The setting is now saved.
Settings Overview of available settings The factory setting for each option is shown in bold.
Settings Language Timer You can select a language and country for all display texts. The timer offers the following options: Tip: If you select the wrong language by mistake, you can find the "Language" option by following the flag symbol F. Time You can set the clock display and the time of day. Clock format The options are: – 24-hour display (24 h) – 12-hour display (12 h) Setting the time Use the arrow sensors to set the hours and minutes. The coffee machine – switches on at a particular time, e.g.
Settings The programmed times will, however, remain in memory and will be reactivated after manually switching the machine on again. Switch off at Use the arrow sensors to set the hours and minutes. If you have not used the coffee machine for a long time, the saved times will be reactivated after manually switching the machine on again (see "Switch on at").
Settings Info (display information) Water hardness The "Info" option allows you to see how many portions of each drink have been made. See "Setting up and using the coffee machine" for information about water hardness. You can also see whether more than 50 portions can be dispensed before the machine needs to be descaled ("No. of portions until descaling") or before the brew unit needs to be degreased ("No. of portions until degreasing"). To return to the previous display: ^ Touch OK.
Settings Factory default You can reset the settings back to the ones which were set when the coffee machine was delivered. Please refer to the "Overview of available settings" chart for the factory settings which are shown in bold.
Cleaning and care Quick guide Clean the coffee machine regularly to avoid a build-up of bacteria.
Cleaning and care ,Danger of burning and scalding on hot components or by hot liquids. Always allow the coffee machine to cool down before cleaning it. Caution. Water in the drip tray can be very hot. Do not use a steam cleaner to clean the coffee machine. Steam could cause a short circuit. Rinsing the machine After a coffee has been dispensed, the machine is rinsed before it switches off. This removes any residual coffee grounds. You can also rinse the machine manually. ^ Touch x.
Cleaning and care Milk pipework Ensure that all components in which milk is transported are cleaned on a regular basis. Milk naturally contains bacteria that rapidly multiply if the milk pipework is not cleaned properly. Soiling in the appliance may be dangerous to health. Rinsing the milk pipework Milk residue can clog up the milk pipes. If a drink has been made using milk the coffee machine will prompt you to rinse the pipework when you switch the machine off.
Cleaning and care Cleaning the milk pipework with Miele cleaning agent for milk pipework The cleaning process cannot be cancelled once it has started. The process has to be completed through to the end. ^ Touch x. ^ Select "Maintenance" and touch OK ^ Select "Clean milk pipework" and touch OK. The process will start. ^ Follow the instructions given in the display.
Cleaning and care Central spout with cappuccinatore Clean the central spout cover by hand only using warm water and a little washing-up liquid. All other parts are dishwasher safe. ^ Twist upper section a with the holder for the milk pipework and pull it off. Then pull the Y-shaped piece b off. Release the spouts c. ^ Clean all parts thoroughly. ^ Push the central spout right down and remove the stainless steel cover by pulling it off towards you.
Cleaning and care If the milk pipe is blocked, clean it under running water with the brush supplied. ^ Insert the brush in the tube and move it back and forth as far as it will go until all milk residue has been removed. Milk flask The milk flask should be taken apart and cleaned every day. ^ Fit the dispensing unit back together. ^ Clean all parts by hand only using hot water and a little washing-up liquid. Use the cleaning brush supplied to remove milk residues from the milk pipework if necessary.
Cleaning and care Clean the water container Drip tray cover Clean the water container lid by hand only using hot water and a little washing-up liquid. ^ Remove the drip tray cover from the drip tray. Change the water every day to prevent a build-up of bacteria. Make sure that the valve, the underside of the water container and the surface the water container sits on are clean. Otherwise the water container will not sit correctly.
Cleaning and care Drip tray and waste container ^ Push the central spout up as far as it will go. Clean the drip tray and waste container every day to avoid unpleasant smells and mildew. The waste container is located in the drip tray. Water from rinsing also collects in the waste container. A prompt will appear in the display when the drip tray and/or the waste container is full and needs to be emptied. Empty the drip tray and the waste container.
Cleaning and care Bean container and ground coffee chute ,Disconnect the coffee machine from the power supply before cleaning. Tip: Use a vacuum cleaner to remove any coffee residues from the bean container and the ground coffee chute. ^ Open the bean container. ^ Remove any coffee beans. Brew unit ,Disconnect the coffee machine from the power supply before cleaning. Clean the brew unit by hand only using warm water. Do not use washing-up liquid. The moving parts of the brew unit are lubricated.
Cleaning and care If you cannot remove the brew unit or can only do so with difficulty, the brew unit is not in the correct position (See "Problem solving guide"). ^ Push the brew unit back into the coffee machine, making sure it goes in straight. After taking the brew unit out of the machine do not change the position of the brew unit handle, as this would cause the brew unit to be out of alignment and you will not be able to push it back into the coffee machine.
Cleaning and care Degreasing the brew unit Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly. ^ Follow the instructions given in the display. When "Place a cleaning tablet in the ground coffee chute and close the chute" appears in the display: Degrease the brew unit regularly with the Miele cleaning tables supplied. This ensures you can continue to make aromatic coffees and guarantees trouble-free operation of your coffee machine.
Cleaning and care Housing External surfaces may suffer discolouration or damage if soiling is left on them for too long. Remove soiling immediately. Make sure that water cannot get behind the display. All external surfaces are susceptible to scratching and can suffer discolouration if they come into contact with unsuitable cleaning agents. Wipe up any spillages or splashes of descaling agent immediately. ^ Switch the coffee machine off.
Descaling When descaling the machine, cover delicate surfaces and natural flooring to prevent damage from splashes of descaling solution. Ensure that any splashes of descaling solution are wiped up immediately. Limescale builds up in the coffee machine through use. How often the appliance needs to be descaled will depend on the water hardness level in your area. The machine should be descaled regularly to ensure that it functions correctly. The machine will guide you through the descaling process.
Descaling ^ Place 1 descaling tablet in the water. Ensure that you adhere to the mixing ratio for the descaling tablets. It is important that you do not fill the water container with less water than prescribed. The descaling programme will otherwise be cancelled prematurely. ^ Replace the water container. ^ Follow the further instructions given in the display.
Problem solving guide Most problems that occur during daily use can be easily corrected. With the help of the following guide, you will be able to find the causes of problems and rectify them. ,Important! Do not open the outer casing of the machine. Repairs must only be carried out by a Miele approved service technician. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. If you can't remedy the problem yourself, please call Miele.
Problem solving guide Message Possible cause and remedy "Too much ground There is too much ready ground coffee in the ground coffee coffee" chute. If more than one level scoop of ground coffee is added to the coffee chute, the brew unit cannot process the coffee. The ground coffee will be directed into the waste container and the fault message will appear in the display. ^ Switch the machine off with the On/Off - sensor. ^ Remove and clean the brew unit (see "Cleaning and care – Brew unit").
Problem solving guide Message Possible cause and remedy F73 or "Check the brew unit" The brew unit cannot be positioned correctly. ^ Switch the machine off with the On/Off - sensor. ^ Remove and clean the brew unit (see "Cleaning and care – Brew unit"). ^ Push the coffee ejector of the brew unit into the correct position (see diagram). ^ Do not fit the brew unit. Close the front of the machine and switch the machine on with the On/Off - sensor.
Problem solving guide Unusual performance of the coffee machine Problem Possible cause and remedy The lighting remains off after the coffee machine has been switched on. The lighting has been switched off. ^ Switch the lighting on (see "Settings - Lighting"). The display remains dark after the coffee machine has been switched on using the On/Off - sensor. The On/Off - was not touched for long enough. ^ Touch the On/Off - sensor for at least 3 seconds. The lamp is defective. ^ Call Miele Service.
Problem solving guide Problem Possible cause and remedy The sensors do There is an internal fault. not react to touch. ^ Disconnect the machine from the power supply by The appliance removing the plug from the socket. cannot be operated. The coffee machine does not switch itself on, although the "Switch on at" setting has been activated for the timer. The system lock has been activated. ^ You need to deactivate the system lock (see "Settings System lock").
Problem solving guide Problem Possible cause and remedy Neither milk nor milk froth comes out of the central spout. The milk pipework is blocked. ^ Clean the central spout, taking particular care to clean the cappuccinatore and milk pipes carefully with the cleaning brush. "Empty the drip tray" appears in the display, even though the drip tray is empty. The drip tray is not positioned correctly in the machine. ^ Push the drip tray in as far as it will go. Drink preparation has been cancelled.
Problem solving guide Problem Possible cause and remedy Drink dispensing Condensate may have built up on the control panel and starts even though accidentally started the process. a sensor has not ^ Wipe any condensate off with a soft cloth. been touched. Milk is dripping or The level of milk in the milk flask is higher than the central running out of the spout. central spout even ^ Push the central spout up as far as it will go. though no milk is being dispensed.
Problem solving guide Problem Possible cause and remedy Coffee or Espresso is not flowing out of the central spout, or coffee is only being dispensed via one spout. The central spout has a blockage. ^ Clean the coffee pipework (see "Cleaning and care Rinsing the machine).
Problem solving guide Unsatisfactory results Problem Possible cause and remedy The consistency of The milk temperature is too high. Good milk froth can only the milk froth is be achieved when cold milk (below 13°C) is used. unsatisfactory. ^ Check the temperature of the milk. The milk pipework is blocked. ^ Clean the central spout with integrated cappuccinatore and the milk pipework with the cleaning brush.
Problem solving guide Problem Possible cause and remedy The crema on the The grinder setting is not correct. coffee or espresso ^ Set the grinder to a finer or coarser setting (see "Setting is not as it should the coffee grinder"). be. The brewing temperature is too high for this type of coffee. ^ Set a lower brewing temperature (see "Brewing temperature"). The coffee beans are stale. ^ Add fresh coffee beans to the coffee bean container.
Transporting the machine If you are not going to use the coffee machine for an extended period of time, e.g. whilst on holiday, or if it needs to be moved, a number of procedures will need be carried out to ensure its safety. Please carry out the following: ,Caution. Danger of burning and scalding from hot steam coming out of the hot water spout. The evaporation process is finished when "Process finished" appears in the display.
After Sales / Guarantee In the event of a fault which you cannot correct yourself, or if the machine is under guarantee please contact: – your Miele Dealer or – Miele Contact details for Miele are given at the end of this booklet. N.B. A call-out charge will be applied to service visits where the problem could have been resolved as described in these instructions. When contacting Miele, please quote the model and serial number of your machine.
Saving energy If the default settings for "Eco mode" or the "Timer" have been altered, energy consumption will increase. The message "This setting uses more energy" will appear in the display. Switch the machine off with the master switch and at the wall socket. If the coffee machine is not going to be used for a longer period of time, e.g. whilst on holiday, switch it off with the master switch and at the wall socket.
Electrical connection All electrical work should be carried out by a suitably qualified and competent person only, in strict accordance with current national and local safety regulations (BS 7671 in the UK). Installation, repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. Ensure power is not supplied to the machine until after installation work has been carried out.
Installation Please observe the following installation instructions: Danger of overheating. Please ensure that there is adequate ventilation around the machine. Do not cover the machine with tea towels or similar objects whilst it is in use. Danger of overheating. If the coffee machine is installed behind a kitchen furniture door, it may only be used with the furniture door open. Do not close the furniture door while the coffee machine is in use.
Appliance dimensions 74
Technical data Current draw in standby mode (default setting) < 0.5 Watt Pump pressure: max. 15 bar Through-flow heater: 1 stainless steel thermo block Appliance dimensions (W x H x D): 251 x 359 x 427 mm Net weight 9,9 kg Connection cable length: 140 cm Water container capacity: 1,8 l Bean container capacity: 300 g Stainless steel milk flask capacity: 0.5 l Waste container capacity: max.
8QLWHG .LQJGRP -IELE #O ,TD &AIRACRES -ARCHAM 2OAD !BINGDON /XON /8 47 4EL #USTOMER #ONTACT #ENTRE 4EL % MAIL INFO MIELE CO UK )NTERNET WWW MIELE CO UK $XVWUDOLD -IELE !USTRALIA 0TY ,TD !". 'ILBERT 0ARK $RIVE +NOXFIELD 6)# 4EL &AX )NTERNET WWW MIELE COM AU &KLQD -IELE 3HANGHAI 4RADING ,TD &LOOR .
CM 6300 en - GB M.-Nr.