User manual
Table Of Contents
- Contents
- Caring for the environment
- Warnings and safety instructions
- Operating the tumble dryer
- Before using for the first time
- Energy saving tips
- 1. Notes on correct laundry care
- 2. Load the tumble dryer
- 3. Select a programme and start it
- 4. Remove the laundry
- Delay start/SmartStart
- Programme chart
- Changing the programme sequence
- Condensed water container
- Fragrance flacon
- Cleaning and care
- Problem solving guide
- Indicator lights or information on the time display triggered when a programme is cancelled
- Indicator lights or information on the time display
- Unsatisfactory drying results
- The drying cycle duration is very long
- Other problems
- Replacing the plinth filter
- Reactivating the plinth filter
- Checking the heat exchanger
- Service
- Installation
- Technical data
- Consumption data
- Programmable functions
- Programming
- Cottons drying levels
- Minimum iron drying levels
- Cool-down temperature
- Buzzer volume
- Keypad tone
- Lock code
- Conductivity
- Control field standby status
- Memory
- Anti-crease
- Buzzer is active
- Airways indicator
- Backlight brightness dimmed
- Factory default
- Networking
- Copyrights and licences for the communication module
Fragrance flacon
43
Inserting the fragrance flacon
Open the door of the tumble dryer.
The fragrance flacon is inserted in the
upper fluff filter. They can be fitted on
the left and the right hand side next
the opener.
Open the cover using the tab until the
tab is right at the top as shown.
To prevent the accumulation of fluff,
the cover of the unused socket must
remain closed.
Push the tab of the cover to the bot-
tom (see arrow), until you hear it click
into position.
Insert the fragrance flacon into the
socket as far as it will go.
Markers and must line up with
one another.