Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Notes on installation
- All Gas Range dimensions
- All Electric Range dimensions
- Dual Fuel Range dimensions
- HR 1724-3 DF
- Detailed views of HR 1724-3 DF
- HR 1924-3 DF
- Detailed views of HR 1924-3 DF
- HR 1934-3 DF, HR 1935-3 DF, HR 1936-3 DF
- Detailed views of HR 1934-3 DF
- Detailed views of HR 1935-3 DF
- Detailed views of HR 1936-3 DF
- HR 1954-3 DF, HR 1955-3 DF, HR 1956-3 DF
- Detailed views of HR 1954-3 DF
- Detailed views of HR 1955-3 DF
- Detailed views of HR 1956-3 DF
- Anti-tip device
- Plumbed water connection
- Electrical connection
- Gas connection
- Burner ratings
- Burner ratings HR 1124-3 AG
- Burner ratings HR 1134-3 AG
- Burner ratings HR 1135-3 AG
- Burner ratings HR 1136-3 AG
- Burner ratings HR 1724-3 DF
- Burner ratings HR 1924-3 DF
- Burner ratings HR 1934-3 DF
- Burner ratings HR 1935-3 DF
- Burner ratings HR 1936-3 DF
- Burner ratings HR 1954-3 DF
- Burner ratings HR 1955-3 DF
- Burner ratings HR 1956-3 DF
- Customer Service
- Caring for the environment
- Copyrights and licenses
- Copyrights and licenses for the communication module
IMPORTANT SAFETY INSTRUCTIONS
- The circuit breakers have been switched off, or
- the fuses of the electrical installation have been completely
removed, or
- the plug (if present) is removed from the outlet. To do this, pull the
plug not the cord.
- Shut off the gas supply and disconnect the range from the gas
supply. Installation and maintenance of the gas connection must
be performed by qualified installers, service agencies or gas
providers.
Do not use a power strip or extension cord to connect the range
to electricity. These are a fire hazard and do not guarantee the
required level of appliance safety.
This range must not be installed and operated in non-stationary
installations (e.g., on a ship).
Risk of injury due to electric shock. Any contact with live
connections or tampering with the electrical or mechanical
components of the range will endanger your safety and may lead to
appliance malfunctions.
Do not open the range housing under any circumstances.
Any repairs not performed by a Miele authorized service
technician will void the warranty.
Miele can only guarantee the safety of the appliance when original
Miele parts are used. Faulty components must only be replaced with
genuine Miele parts.
The range requires a sufficient supply of cool air for efficient
operation. Make sure that the supply of cool air is not hindered in
any way (e.g., by installing heat insulation strips in the cabinet niche).
In addition, the required supply of cool air must not be excessively
heated by other heat sources.
Changes or modifications not expressly approved by Miele may
void the user's authority to operate the oven.
12