Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Notes on installation
- All Gas Range dimensions
- All Electric Range dimensions
- Dual Fuel Range dimensions
- HR 1724-3 DF
- Detailed views of HR 1724-3 DF
- HR 1924-3 DF
- Detailed views of HR 1924-3 DF
- HR 1934-3 DF, HR 1935-3 DF, HR 1936-3 DF
- Detailed views of HR 1934-3 DF
- Detailed views of HR 1935-3 DF
- Detailed views of HR 1936-3 DF
- HR 1954-3 DF, HR 1955-3 DF, HR 1956-3 DF
- Detailed views of HR 1954-3 DF
- Detailed views of HR 1955-3 DF
- Detailed views of HR 1956-3 DF
- Anti-tip device
- Plumbed water connection
- Electrical connection
- Gas connection
- Burner ratings
- Burner ratings HR 1124-3 AG
- Burner ratings HR 1134-3 AG
- Burner ratings HR 1135-3 AG
- Burner ratings HR 1136-3 AG
- Burner ratings HR 1724-3 DF
- Burner ratings HR 1924-3 DF
- Burner ratings HR 1934-3 DF
- Burner ratings HR 1935-3 DF
- Burner ratings HR 1936-3 DF
- Burner ratings HR 1954-3 DF
- Burner ratings HR 1955-3 DF
- Burner ratings HR 1956-3 DF
- Customer Service
- Caring for the environment
- Copyrights and licenses
- Copyrights and licenses for the communication module
Anti-tip device
*INSTALLATION*
Do not carry or lift the range by the oven door handle or the control panel!
Checking the installation niche
Install the anti-tip device on a surface capable of bearing significant weight, such
as a concrete floor, concrete wall, or timber framing. The surface must be flat and
level.
If the rear of the Range has distance A to the supporting wall due to
unevenness or wall covering (e.g., tile level), you must install the anti-tip device
to the supporting floor. Alternatively, you can also install the anti-tip device with
an adapter between the supporting wall and the anti-tip device. The adapter
must compensate dimension A and be made of suitable material so that a
supporting connection is made between the wall and anti-tip device. Use
appropriate screws (length and diameter).
A
A = Distance between the rear of the Range and the supporting wall
97