Technical Specifications

Installation: Drop-in
cannot be under mounted
3266VN
32" x 66" x 23"
• Before ordering or installing, please consider future
access to equipment.
• Add bedding compound to fully level and support bottom
of tub.
• Tubs equipped with an air bath or a pre-leveled
foam base are designed to rest on the floor without bedding
compound, provided the floor is level.
• Please measure tub on-site before building tub decking.
• Jet, pump & blower locations are predetermined and
cannot be changed.
• Suction and control locations may vary.
• Specifications and configurations are subject to change
without notice.
• Measurements are +1/2" and are subject to change
without notice.
• Measurements herein supersede all others published
prior to publication date shown below.
OPTIONS
Colors Available - White Biscuit
Quick Ship - reduces lead time - call for availability
Inline Heater with Pump - Whirlpool or Dual Bath
Lift & Turn Drain Kit -Chrome,Brushed Nickel, White
31 air jets, air blower, textured bottom
IMPORTANT INFORMATION
31 air jets, air blower, textured bottom
ELECTRICAL SPECIFICATIONS:
Required Electrical Service 110 Volt
Air Bath or Whirlpool 1-15 amp GFCI
Whirlpool with Inline Heater 1-20 amp GFCI
Dual Bath 1-20 amp GFCI
Soaker
GENERAL SPECIFICATIONS:
Material Acrylic
Plumbed Weight : 160lbs / 73kg
Soaker Weight : 130lbs /59kg
Average Fill: 60gal to above jet level
©2013 by SPA WORLD CORP Modification Rights Reserved.
2