Assembly Instructions

INSTALLATION TIPS
Level 1
(16) Belgian Wall Medium Block
6’ 4”
7’ 6”
(16) Belgian Wall Small Block
(16) Belgian Wedge Wall Block
Place the rst layer of block around the base of the tree, adjusting the ring as needed until
it is complete. Mark both the interior and exterior outlines of the ring as a guide. Remove
the blocks and dig a trench 3”- 4” deep and 10” wide for the base of the ring. Compact
and level the soil with a tamper. Add 2” of gravel in the trench; tamper and level gravel.
Reposition the rst layer of block in the center of the trench, adding gravel to level the
blocks as needed. Blocks should sit 1”- 2” below grade to prevent shifting. Fill in any
gaps with gravel and tamp to compress. Position the remaining layers, staggering the joints,
applying a
1/4”- 3/8” bead of construction adhesive between each layer. Refer to the
construction adhesive’s application instructions for proper use.
A thin layer of dirt for planting may be added inside the ring without covering the base of
the trunk. If using mulch, apply a 2” to 3” layer to help retain moisture and block weed
growth. Additional vegetation will compete for moisture and nutrients, water accordingly.
CONCRETE BLOCK MATERIALS
Rubber Mallet
Level
Utility Knife Caulk Gun
Tape Measure
TOOL CHECK LIST:
Shovel
Coarse Gravel
Tamper
Product
Belgian Wall Medium Block
Belgian Wall Small Block
Belgian Wedge Wall Block
Quantity
48
48
48
* Check local building codes for regulations on re pit types and
allowed placement prior to starting this project.
* Exercise caution when working with concrete block. Wear
protective equipment; safety glasses, work boots and gloves.
ADDITIONAL MATERIALS
Product
Landscape
Adhesive
SKU #
520-2025
Quantity
5
* Every project, no matter the size, requires a call to mark your
utility lines.
Small
Wedge
179-3649
179-3647
179-3652
179-3639
Wedge
179-3721
179-3722
179-3723
179-3724
Sienna
Quarry Gray
Tan
Autumn Blend
Small
Color
BELGIAN WALL BLOCKS
179-3731
179-3732
179-3733
179-3734
Medium
Medium