User Guide

Model T60 Series
Page 11
midlandusa.com
CALL ALERT SELECTION
Your radio has 5 selectable CALL ALERTS (10 for T65). To select,
press the MENU button until a “CA” icon appears and to the right of
the “CA” icon the current CALL ALERT setting is displayed. Then
press the
s\t
buttons to make the CALL ALERT selections, and the
radio will emit a corresponding tone for each selection. To confirm,
press the PTT button or press the MENU button to move to the next
feature setting.
VIBRATE ALERT (MODEL T65 only)
To set the VIBRATE ALERT, press the MENU button until the display
shows the icon. Select “on” or “oF” by pressing the s\t
buttons
and push the PTT button, or press the MENU button. The icon will
remain on the display if set to “on”.
SILENT OPERATION
Your radio has a SILENT OPERATION mode. In this mode, all
“beeps” and “tones” are disabled.
To set the SILENT OPERATION, press the MENU button until the
display shows a “bP” icon. Select “on” or “oF” by pressing the
s\t
buttons and push the PTT key or MENU button.
NOAA WEATHER RADIO/SCAN
Your radio has a NOAA WEATHER RADIO function to enable the
user to receive weather reports from designated NOAA stations.
Your radio also has a NOAA WEATHER SCAN function to enable the
user to scan all 10 channels of the NOAA WEATHER RADIO. To turn
the NOAA WEATHER SCAN on, press and hold the WX/
s
button for
5 seconds while in FRS mode. The radio will go to WX Band mode
and start scanning all 10 channels and stop on any active channel.
When the channel becomes inactive for 10 seconds the radio will
resume scanning.
To stop the NOAA WEATHER (WX) SCAN and set the channel
manually on the WX Band, press the MENU button during NOAA
WEATHER (WX) SCAN. The radio will stop scanning and the display
will show the current WX Band channel setting . While on WX Band
mode press the
s\t
buttons to select one of the 10 NOAA
WEATHER (WX) BAND channels.