User's Manual
Table Of Contents
- October 2008
- Page
- TX = = = = = = = = = =
- TX
- TX
- TX
- TX
- TX
- TX
- TX
- TX
- TX
- TX
- TX
- To: 366
- TX
- TX
- TX
- TX
- TX
- TX
- TX
- 123456
- TX
- TX
- TXN 154.600
- TX
- TX
- TX
- TX
- TX
- TX
- TXW RX 0dbm Out
- C001 25 / 31 MA
- TXW RX FX828 MOD1
- C001 0 / 31 MA
- TXW DIGITAL DEVI
- C001 27 / 31 MD
- TXW ANALOG DEVI
- C001 19 / 31 MA
- TXW TONE DEVI
- C001 27 / 31 MA
- Please Key - in
- CH Key
- RTSW UP
- RTSW DWN
- Your Message Here
- NOTE: Pins 1-4, 6 and 9 are only available when pin 24 (Remo
30. DISPLAYING THE PROGRAMMING SOFTWARE VERSION
Press and Hold A,
and turn on the radio, the programming software version is
indicated. When the A key is released, the radio will reboot in the normal mode
Figure-60 shows V-0.2.3195 version
Set by p-kgprg 023195
Figure 60
31. DATA CHECK
The Midland Base Tech III has a self diagnostic function. All data in the
EEROM is checked every time the radio is switched on. If the data is not
properly stored, the radio automatically turns to programming mode
Figure-61 shows ERROM Data error
EEROM Data Error
Figure 61
30
www.midlandradio.com
Version 5.0
680-090-2042