User's Manual
Table Of Contents
- October 2008
- Page
- TX = = = = = = = = = =
- TX
- TX
- TX
- TX
- TX
- TX
- TX
- TX
- TX
- TX
- TX
- To: 366
- TX
- TX
- TX
- TX
- TX
- TX
- TX
- 123456
- TX
- TX
- TXN 154.600
- TX
- TX
- TX
- TX
- TX
- TX
- TXW RX 0dbm Out
- C001 25 / 31 MA
- TXW RX FX828 MOD1
- C001 0 / 31 MA
- TXW DIGITAL DEVI
- C001 27 / 31 MD
- TXW ANALOG DEVI
- C001 19 / 31 MA
- TXW TONE DEVI
- C001 27 / 31 MA
- Please Key - in
- CH Key
- RTSW UP
- RTSW DWN
- Your Message Here
- NOTE: Pins 1-4, 6 and 9 are only available when pin 24 (Remo
9.11 TELEPHONE-
Used to initiate a telephone interconnect request on the RF subsystem.
Press F then Press A or B until the selection is displayed, then enter the complete
telephone number including country and area code. (max. 16 digits), then Press #.
Figure 22 shows the Midland Radio Corporation telephone number.
Telephone
To:18162418500
MD⌧N
Figure 22
9.12 SBC LOG-
To toggle the SBC LOG ON, Press SHIFT+F, to turn the LOG OFF Press F.
When the SBC LOG is entered, the last SBC call is displayed. Press B to scroll to
the previous records and Press A to scroll to the end of the list.
The radio will store up to 99 log entries. When more than 99 entries are made the
oldest log will be deleted.
Note: When the radio is reset or reprogrammed, all logs are deleted.
Figure 23 shows the fifth entry of the SBC Log.
< SBC Log >
5: To: 00000366 F
Radio Monitor
TX Multi: 3
Figure 23
15
www.midlandradio.com
Version 5.0
680-090-2042