User's Manual
Table Of Contents
- October 2008
- Page
- TX = = = = = = = = = =
- TX
- TX
- TX
- TX
- TX
- TX
- TX
- TX
- TX
- TX
- TX
- To: 366
- TX
- TX
- TX
- TX
- TX
- TX
- TX
- 123456
- TX
- TX
- TXN 154.600
- TX
- TX
- TX
- TX
- TX
- TX
- TXW RX 0dbm Out
- C001 25 / 31 MA
- TXW RX FX828 MOD1
- C001 0 / 31 MA
- TXW DIGITAL DEVI
- C001 27 / 31 MD
- TXW ANALOG DEVI
- C001 19 / 31 MA
- TXW TONE DEVI
- C001 27 / 31 MA
- Please Key - in
- CH Key
- RTSW UP
- RTSW DWN
- Your Message Here
- NOTE: Pins 1-4, 6 and 9 are only available when pin 24 (Remo
9.2 CALL ALERT-
To send a Call Alert, Press F then Press A or B until the selection is displayed,
then enter the target ID of the radio to alert and Press #. If the target radio has
received the Call Alert the display should show “ACK” (acknowledgement).
Figure 14 displays a Call Alert ACK
Call Alert
To: 366
MD⌧N
Fm: 00000366 (ACK)
Figure 14
9.3 RADIO CHECK-
The dispatcher can send a message to a subscriber unit requesting a response from
the radio (for example, to check if it is in operation).
To initiate a Radio Check, Press F then Press A or B until the selection is
displayed, then enter the target ID of the radio to alert and Press #. If the target radio
has received the Call Alert the display should show “ACK” (acknowledgement).
Figure 15 shows Radio Check Display.
Radio Check
To:_
MD⌧N
Fm: 00000366 (ACK)
Figure 15
11
www.midlandradio.com
Version 5.0
680-090-2042