User Manual

The warming drawer is fitted with a softclose self-closing
mechanism.
It also has a contact switch, which ensures that the heating
element and fan in the appliance only work when the
drawer is closed.
^ Close the drawer.
Metal components have a protective coating which may give
off a slight smell when heated up for the first time.
The smell and any vapours will dissipate after a short time,
and do not indicate a faulty connection or appliance.
Ensure that the kitchen is well ventilated whilst the appliance
is being heated up for the first time.
Guide to the appliance
a Control panel
For appliances with no handle: Press the middle of the drawer to open or close it.
When opening, the drawer pops out slightly. You can then pull it out towards you.
Before using for the first time
A display test is carried out for 10 seconds after the
appliance has been installed and after a power cut. The fan
comes on at the same time. The appliance cannot be used
during this time.
Please stick the extra data plate for the appliance supplied
with this documentation in the space provided in the "After
sales service, data plate" section of this booklet.
Cleaning and heating up for the first time
^ Remove any protective foil and sticky labels.
^
the drawer,
and sponge both with warm water and a little
washing-up liquid. Dry using a soft cloth.
^ Wipe the appliance inside and out with a damp cloth only,
and then dry with a soft cloth.
^ Replace the rack (if applicable) in the
drawer.
Then heat the empty drawer for at least two hours.
^ Switch the appliance on by touching the sensor.
^
^ Touch the
^ Touch the sensor repeatedly until 2h lights up.
Touch the sensor repeatedly until the LED light.
sensor repeatedly until the LED on the far
right lights up.
6
removeIf applicable, the rack from