User's Manual

NOTE: There is a 10 AMP DC circuit breaker on front panel of HDX-1100. If the power to this

breaker is fed from another circuit breaker in the aircraft, the HDX-1100 breaker should be left in

the on position. To operate the breaker: push in = ON, pull out = OFF, a manual reset is required

after the breaker trips.

HDX-1100 MECHANICAL OUTLINE

There are two possible mounting configurations, which should provide an installer with enough

flexibility to work in most situations:

1) For situations where the transmitter will be mounted on a flat surface, four captive nuts

have been installed in the transmitter side plate.

2) An optional aircraft mounting kit (part # 9000372) may be ordered. The kit includes an

ARINC compliant low profile tray with quick release clamps, and removable spacers.

Optional 9000372 3/8 ATR mounting kit with removable spacers