User Manual

37
Tools
■ Clock
Select Menu > Tools > Clock. To change the clock settings, and to set the time and date,
select Options > Settings.
Alarm clock
To set a new alarm, scroll right to Alarms, and select Options > New alarm. Enter the alarm
time, select whether and when the alarm is repeated, and select Done.
To change AM and PM, highlight the current setting, and press any key to change from AM
to PM, or from PM to AM.
To cancel an alarm, scroll to the alarm, and select Options > Remove alarm. To deactivate a
repeated alarm, select Options > Deactivate alarm.
Select Stop to turn off the alarm.
Select Snooze to stop the alarm for 5 minutes, after which it resumes. You can do this a
maximum of five times.
If the alarm time is reached while the device is switched off, the device switches itself on
and starts sounding the alarm tone. If you select Stop, the device asks whether you want to
activate the device for calls. Select No to switch off the device or Yes to make and receive
calls. Do not select Yes when wireless phone use may cause interference or danger.
World clock
To set the phone to show the time in other locations, scroll right to World clock. To add a
location, select Options > Add location.
To set your current location, scroll to a location, and select Options > Set as current location.
The location is displayed in the clock main view, and the time in your phone is changed
according to the location selected. Check that the time is correct and matches your time
zone.
■ Camera
To activate the camera, press the Camera/Video key, or select Menu > Tools > Camera.
Capture an image
Your device supports an image capture resolution of up to 2048 x 1536 pixels.
To capture an image, use the display as a viewfinder and press the scroll key. The image is
saved to Images in My Stuff. To return to the viewfinder, select Back. To delete the image,
press the backspace key.
To zoom in or out before capturing an image, scroll up or down. This function is available
only when the toolbar is not shown.
To focus on the subject before capturing the image, press the T key.
Model E71x 24 September 2008
FCC Draft