Software Instruction Manual

Application Builder
CONFIGURATION
5.7 CONNECT BLOCKS
Blocks are connected using the visible connection (Section 4.24) or the
wireless connection (Section 4.25) method. The visible connection can start
by selecting a block or compound to connect from. The wireless connection
always uses the tag list. Attributes are listed in the data base reference books.
Special connections for modules and lists are given in Table 5-1.
The rules for all block inputs are given in Section 3.11.
Table 5-1. Special Connections for Modules and Lists
* A source can connect to multiple destinations.
** Signal flow is actually from SETENTRY to target attribute. Connection is
made from target attribute to SM.SETENTRY.
Source Block.Attribute* Destination Block.Attribute
input module .MODOUT matching input function .MODIN
RIO.MODOUT
remote input or output
module
.MODIN
CJIM.MODOUT TIM Block Version 1.CJCIN
CJIM or RIM or WRIM.MODOUT TIM Block Version 2.CJCIN
CL.LISTOUT ICN.FGLISTIN
ICN.BGLISTIN
MSC.FGLISTIN
MSC.BGLISTIN
CL.LISTOUT CL.ENTRYn (n = 1 to 99)
ML.LISTOUT MSC.DRWIN1 . . . DRWIN5
DROIN1 . . . DROIN5
SRWIN1 . . . SRWIN5
SROIN1 . . . SROIN5
MRWIN1 . . . MRWIN5
MROIN1 . . . MROIN5
PW.TABLEOUT LN.TABLEIN
any writable attribute** SM.SETENTRY
5-16