Maintenance for 2001N, 2002N, and 1800R Manual

MOD30ML and Modcell Maintenance
VIEWING DIAGNOSTIC DATA
3.3.6 Instrument Status Viewer
Table 3 .6. Instructions for using Instrument Status Viewer
Step
Procedure Comments
1
Switch back t the ViZapp Software.
2
Start the Instrument Status Viewer:
Select Instrument – Status from the menu bar at
the top. This will display the Communication
Setup dialog as shown below:
This will show the Server name and the
Device name in the respective fields.
Figure 3.17. Communication Setup
Click on the Browse button near the Server
Name field.
Select MMA.Xmodbus if you are using Extended
Modbus to communicate with the device or
MMA.ICN.DataAccess if you are using the
Instrument Communication Network (ICN) to
communicate with the device from the menu that
appears.
A menu will appear listing all the OPC
Servers that are registered with the
system.
3 -18