Instruction Manual

BP3GK1-4B
16
IB BP3GK1-4B EN
EN
5.10. Memory: reviewing readings
• When the Time button is
-first pressed, the screen will show average of all last readings
-pressed again, the screen will show average of all readings measured in AM(AM
04:00~11:59)
-pressed again, the screen will show average of all readings measured in PM(PM
18:00~23:59)
-pressed again, the screen will show MyBP reading with the icon
-pressed again, the screen will show MyCheck reading with the icon
MyBP
This clinical blood pressure average is only shown when 12 clinically relevant
measurement values in the last 28 days have been performed. Only
measurements that were performed in the morning between 05:00-10:59 or in the
evening between 17:00-22:59 are considered. A maximum of 4 readings per day are
considered (2 from the morning and 2 from the evening).Measurements performed in
standard mode and in MAM mode are considered in the average, when they have been
performed during the right time of the day.
Measurements performed in MAM-mode or single standard mode are both classed as single
measurements for working out the «MyBP average».
MyCheck
This symbol indicates after each measurement, if the most recent measured
value lies below, above or on the same level as your MyBP value.
If the measured Systole or Diastole is more than 5mmHg higher than the stored
average, the arrow shows upwards.
If the measured Systole or Diastole is more than 5mmHg lower than the stored average, the
arrow shows downwards.
If the measured Systole and Diastole do not differ by more than 5mmHg from the stored
average, the arrow shows straight on.
If the measured systole and diastole differ in different directions from the stored average,
this is indicated first with the systole figure flashing, together with the up or down arrow for