CHAPTER 1 Preface
1-2 Preface Table of Content Preface Table of Content .............................................................................................................................1-2 Regulations Information................................................................................................................1-4 FCC-B Radio Frequency Interference Statement .....................................................................1-4 FCC Conditions ........................................................
1-3 Preface Getting Started Power Management .......................................................................................................................3-2 Battery Power ............................................................................................................................3-2 AC Power ..................................................................................................................................3-3 Basic Operations .........................................
1-4 Preface Regulations Information FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
1-5 Preface Shield interface cables and AC power cord, if any, must be used in order to comply with the emission limits. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation.
1-6 Preface CE Conformity This device is in compliance with the essential safety requirements and other relevant provisions set out in the European Directive. Safety Instructions Read the safety instructions carefully and thoroughly. All cautions and warnings on the equipment or user’s manual should be noted. Keep the User’s Guide that comes with the package for future reference. Keep this equipment away from humidity and high temperature.
1-7 Preface Do not leave the equipment in an unconditioned environment with a storage temperature above 60°C (140°F) or below 0°C (32°F), which may damage the equipment. The unit should be operated under maximum ambient temperature of 40°C (120°F). Make sure the power voltage is within safety range and has been adjusted properly to the value of 100~240V before connecting the equipment to the power outlet. Always unplug the AC power cord before installing any add-on card or module to the equipment.
1-8 Preface Always keep the strong magnetic or electrical objects away from the equipment. To prevent explosion caused by improper battery replacement, use the same or equivalent type of battery recommended by the manufacturer only. Always keep the battery in a safe place. If any of the following situations arises, get the equipment checked by a service personnel: The power cord or plug is damaged. Liquid has penetrated into the equipment. The equipment has been exposed to moisture.
1-9 Preface Environmental Policy The product has been designed to enable proper reuse of parts and recycling and should not be thrown away Users should contact the local authorized point of collection for recycling and disposing of their end-of-life products. Safety Guideline for Using Battery CAUTION: Danger of explosion if battery is incorrectly replaced. recommended by the equipment manufacturer.
1-10 Preface Trademarks All trademarks are the properties of their respective owners. Revision History Version Revision History Date 1.
CHAPTER 2 Introductions
2-2 Introductions Congratulations on becoming an user of this product, the finely designed tablet PC. This brand-new exquisite tablet PC will give you a delightful and professional experience in using it. We are proud to tell our users that this product is thoroughly tested and certified by our reputation for unsurpassed dependability and customer satisfaction. Manual Map This User’s Manual provides instructions and illustrations on how to operate this tablet PC.
2-3 Introductions These accessories listed above may change without notice. Unpacking First, unpack the shipping carton and check all items carefully. If any item contained is damaged or missing, please contact your local dealer immediately. Also, keep the box and packing materials in case you need to ship the unit in the future.
2-4 Introductions Specification Physical Characteristic Dimension 245.9 (W) x 192.7 (D) x 11.2 (H) mm Weight 648g CPU Processor Type ARM Cotex A8 / 1GHz Memory Memory 1GB DDR3 DRAM Storage (Items listed here may vary depending on the model users purchased) Storage 8GB Special Notification The actual storage preinstalled in this product depends on the model you purchased, and may very without notice. Power AC/DC Adapter 12V, 1.
2-5 Introductions I/O Port Mini USB Connector x2 Headphone out x1 Mini HDMI Connector x1 Internal Microphone x1 Card Reader (microSD) x 1 (Supports Maximum 32GB) The supported memory cards may vary without notice. Communication Port (Items listed here may vary without notice) Wireless LAN Supported Bluetooth Supported Audio Internal Speaker 2 speakers with housing Sound Volume Adjust by volume button Display LCD Type 10.
2-6 Introductions WebCam Front Webcam (optional) Supported Rear Webcam (optional) Supported Others ALS (Amyotrophic lateral sclerosis) Supported e-Compass Supported G-Sensor Supported Vibration Motor Supported Special Notification The actual function preinstalled in this product depends on the model you purchased, and may vary without notice.
2-7 Introductions Product Overview This section provides the description of basic aspects of this tablet PC. It will help you to know more about the appearance of this device before using it. Please be aware that the device shown in this section may vary from the actual one that users purchased. 1 4 3 2 The figures show here are for reference only.
2-8 Introductions 15 14 16 5 6 7 8 10 11 12 9 13
2-9 Introductions 1. Rear Webcam This built-in Rear Webcam can be used for picture taking, video recoding or conferencing, and any other interactive applications. 2. Stereo Speakers Give high quality sound blaster with stereo system and Hi-Fi function supported. 3. Reset Hole When your tablet PC is crashed, you can use a straightened paperclip to inset the reset hole to reset the tablet PC. 4. Card Reader The built-in card reader may support microSD card.
2-10 Introductions 6. Volume Up / Volume Down Press the Volume Up or Volume Down button to decrease or increase the sound volume. Volume Up Read the icon on behalf of the Sound Level Status appearing on the display to learn the function status. Volume Down 7.
2-11 Introductions 11. Mini USB Port (Device) The mini USB port allows the peripherals devices to connect to the tablet PC. 12. Power Connector Provided to connect the AC/DC adapter and supply AC power for this tablet PC. 13. Quick Launch Touch Sensors Use the quick launch touch sensors to activate the specific applications or tools. Refer to chapter 3 of this manual for the further information. Search This key will launch Search application. Home This key will switch to desktop.
2-12 Introductions 15. Status LED Battery Status Glowing green when the battery is being charged. Battery LED goes out when it is fully charged. Blinking green if the battery fails or when the AC/DC adapter is disconnected. 16.
CHAPTER 3 Getting Started
3-2 Getting Started Power Management Battery Power This tablet PC is equipped with a high-capacity Lithium polymer battery pack. The rechargeable Lithium polymer battery pack is an internal power source of this device. However, the battery equipped is not replaceable by users, and may be damaged if users try to disassemble the product and the battery pack installed inside on their own.
3-3 Getting Started Charging the Battery Pack The battery pack equipped is rechargeable, however please pay attention to the following tips before recharging the battery: Plug in an external AC/DC adapter. You can use the system, suspend system operation or shut down and turn off the system without interrupting the charging process. The battery pack installed inside the device uses Lithium-ion battery cells that have no “memory effect.” It is unnecessary to discharge the battery before recharging.
3-4 Getting Started Connecting the AC Power 1. Unpack the package to find the AC/DC adapter. 2. Plug the DC end of the adapter to the tablet PC, and plug the AC/DC adapter to the electrical outlet. Disconnecting the AC Power When disconnecting the AC/DC adapter, you should: 3. Unplug the AC/DC adapter from the electrical outlet first. 4. Unplug the DC end of the adapter from the tablet PC.
3-5 Getting Started Basic Operations If you are a beginner to this tablet PC, please read the following instructions to assure your own safety, and make yourself comfortable during the operations. Safety and Comfort Tips This tablet PC is a portable platform that allows you to work anywhere. However, choosing a good workspace is important if you are going to use your tablet PC for a long period of time. Your work area should have enough illumination.
3-6 Getting Started Powering On the Tablet PC To power on the tablet PC, follow the steps below: 1. Connect the AC power to the device first, 2. Find the location of the power button as shown in the figure, 3. Press and hold the power button for 3 seconds, the machine starts with a shake.
3-7 Getting Started Unlocking the Tablet PC After power on the tablet PC, you can see the lock screen as below, please refer to the following instruction to unlock the tablet PC. 1. Tap and drag the lock icon upward as shown on the screen. 2.
3-8 Getting Started Muting the Tablet PC Tap and drag the voice icon downward to mute the tablet PC. Or press and hold the power button for 3 seconds, and then tap “Silent mode” to mute your tablet PC.
3-9 Getting Started Introduction of the Desktop 1 2 3 4 5 6 7 8 9 10 12 11 12
3-10 Getting Started 1. Home: Switch to desktop. 7. Menu: Launch Menu function. 2. Battery Status: 8. Browser: Launch the Internet browser. Show current battery status. 3. Time: Show current time. 9. Programs: Activate the programs list. 4. Volume down: 10. Settings: Decrease the sound volume. 5. Volume up: Increase the sound volume. 6. Back: Switch screen to the Change the settings of the tablet PC. 11. Programs Shortcuts: The shortcuts of the default programs. 12.
3-11 Getting Started Changing Orientation This tablet PC is equipped with G-sensor module which gives users an enjoyable experience in viewing web pages, documents, pictures, videos, etc. Whenever the display is rotated, the screen will be rotated and expanded to fit the display automatically.
3-12 Getting Started Using the Quick Launch Touch Sensors This tablet PC provides several quick launch touch sensors. Use these sensors to activate the specific applications or tools. Search This key will launch Search application. The figures show here are for reference only.
3-13 Getting Started Home This key will switch to desktop. Menu This key will launch Menu function.
3-14 Getting Started Back This key will switch to the previous page.
3-15 Getting Started Connecting the Network Tap “Setting” button on the main screen Æ Select “ Wireless & networks” Æ Select “Wi-Fi” to turn on WiFi Æ Select “Wi-Fi settings”, then the available wireless LAN list will show on the screen. Choose one network that you would like to use and enter the authorized password you get.
3-16 Getting Started Language & Keyboard Settings Tap “Setting” button on the main screen and follow the steps below to make language & keyboard settings. (1) Select “Language & Keyboard”.
3-17 Getting Started (2) Tap “Select language”. (3) Choose the language you want to use.
3-18 Getting Started Or (4) select the available keyboard settings
3-19 Getting Started Date & Time Settings Tap “Setting” button on the main screen Æ Select “Date & Time Settings” to make the setting.
3-20 Getting Started Inserting a microSD card to the Tablet PC You may purchase other microSD card to increase the storage capacity of the tablet PC, please follow the steps below to insert or replace it: 1. Locate the microSD card slot on the tablet PC as shown. 2. Dig the edge of the microSD card slot cover with your finger tip. Be careful with your finger while trying to take out of the microSD card slot cover.
3-21 Getting Started 3. Insert or replace the microSD card you purchased into the microSD card slot with correct direction as shown. Then close the microSD card slot cover of the tablet PC.
3-22 Getting Started Connecting the External Devices The I/O (input/output) ports on the tablet PC allow users to connect peripheral devices. All devices listed here are for reference only. Connecting the Communication Devices Using Wireless LAN Connection This tablet PC is equipped with wireless LAN module which allows users to perform fast data transmission with the standard IEEE 802.11 for wireless LAN.
3-23 Getting Started
3-24 Getting Started Connecting the Peripheral Devices Connecting the USB devices This tablet PC provides mini USB ports for connecting various USB devices, such as mouse, keyboard, digital camera, webcam, printer, and external optical storage device, etc. To connect these devices, install the drivers for each device first if necessary, and then connect the device to the tablet PC.
3-25 Getting Started Connecting the External Display Devices to Mini HDMI port Mini HDMI (High Definition Multimedia Interface) is a new interface standard for PCs, displays and consumer electronics devices that supports standard, enhanced and high-definition video, plus multi-channel digital audio on a single cable. Once the display is connected to the tablet PC, power on the tablet PC and the external display should respond by default.
3-26 Getting Started Updating Tablet PC Firmware You can update the firmware of your tablet PC through another notebook or desktop PC. Please check the latest firmware version of your tablet PC to make sure it is up-to-date. To update the firmware can enhance the performance of your tablet PC, please see the following instruction for more updating instructions. Before updated the firmware of your tablet PC, you need to: Backup your personal data on your tablet PC.
3-27 Getting Started Please follow the steps below to update the latest firmware of your tablet PC. (1) Please download the latest firmware of your tablet PC from the following website location http://www.msi.com Please be noted that if you cannot get the latest firmware from this website, please contact the local dealer for detailed information. Please go to the above website location and select “Download”, then choose the following zip file to find the latest firmware.
3-28 Getting Started (2) Connect USB to mini USB cable to your notebook (or desktop PC) and tablet PC. Please be noted that the USB connector may differ from the actual tablet PC you purchase.
3-29 Getting Started (4) Please select “Turn on USB storage”. (5) On the notebook or your desktop PC, an auto-play dialog box with “MSI WINPAD” will pop up on the screen, please select “Open folder to view files”.
3-30 Getting Started (6) Please copy the new firmware to root directory on WINDPAD. Note1: The filename must be “update.img”, if not, please rename the image name. Note2: Remember to copy the firmware file to root directory. (7) Please select “Turn off USB Storage”.
3-31 Getting Started (8) Please select “Install”. You can select “Cancel” to update the firmware later. Please follow the above instruction to turn on/off USB storage setting and back to this dialog box again. (9) Please keep your USB cable connected. The system will auto reboot after updating the firmware. Important: Do not touch the screen when the system is updating the firmware.
3-32 Getting Started (10) Please select “Menu” and then select “Settings”, this step is to confirm the firmware version.
3-33 Getting Started (12) The firmware update is completed. Please confirm the “Build number” is the latest and if its date and version is the same with the information on the website.