MH-ST-327,328,329,330,331,332 10 : 00 1 or more estimated installation time people required 1
Ok, let’s get started! Put on mood music! To prevent damage to product, use the clean side of package carton or rug as working surface for assembly. In the event of missing or damaged parts, delivery problems etc., please reach out to our team.
care guide Clean regularly with a soft and dry cloth. To protect finish, avoid use of abrasive cleaners. Wipe up spills immediately.
product parts (A) Shelf x1 4
what’s included (B)- Screw x6 (C) - Wall Plug x6 5
installation instructions Friendly Tip: Take a deep breath going on. This is easy even if you are not used to tools.
Metal back downwards ONE SHELF, TWO STYLES: This shelf has a dual orientation feature. It can be hung with the metal back facing up and facing down. Follow the same installation steps for both styles.
step 1: Place the shelf on the wall and put a spirit level on it to check its alignment. Adjust till the angle is straight. A step 2: Once the shelf is in a straight alignment, make marks on the wall through the predrilled holes on the shelf.
step 3: Drill holes at the points you just marked. step 4: Using a hammer, insert wall plugs (C) inside the hole.
step 5: Place the shelf so that the predrilled holes on it are right above the wall plugs. Fix the screws (B) into the wall plugs over the shelf. Use a screwdriver to make sure they are secure. B step 6: To install the smaller shelf, follow the steps above. However, instead of six drilling points, the smaller shelf has four drilling points.
Voila! Your shelf is now installed and secure!
