Installation Instructions

ManualsBrandsMetra ManualsAudioDodge Ram 1998-2002 Dash Panel Kit

1

2

3

386.257.1187

|

MetraOnline.com

2

1. Cut or grind the plastic welds from the

rubber trim around the steering column

area of the factory dash panel.

2. Secure the factory rubber trim to the

replacement dash panel with the

supplied retainers and screws.

3. Remove factory vents and snap them

into the replacement dash panel.

(Figure A)

4. Install the (12) panel clips to the

replacement dash panel.

5. Cut the sub-dash to allow room for the

radio assembly. (Figure B)

Continue to Kit Assembly

DASH DISASSEMBLY

1. Unclip, unplug and remove the

dashboard trim panel. (Figure A)

2. Remove (2) 3/8” hex-head screws

securing the radio to the dash. Slide the

radio out, then unplug and remove

Continue to Kit Preparation

(Figure A)

KIT PREPARATION

(Figure D)

(Figure B)

Remove shaded areas