Installation Guide

FINAL ASSEMBLY
99-7402 • Nissan 350Z 2003
6
99-7402
A
Locate the factory wiring harness in the
dash. Metra recommends using the proper
mating adapter and making connections
as shown. (Isolate and individually tape
off the ends of any unused wires to
prevent electrical short circuit).
See figure A
Re-connect the battery terminal and test
the unit for proper operation.
Reassemble dash in the reverse order of
the Dash Disassembly on page 1.
A) Strip wire ends back 1/2"
B) Twist ends together
C) Solder
D) Tape
1
2
3