Installation Guide

99-7365B
Kit Assembly
ISO DIN radio provision with pocket
1. Mountthepockettotheradio
bracketswiththefourofthe
#8x3/8”Phillipsscrewssupplied.
(FigureA)
2. Removethemetal“DIN”sleeve
andtrimringfromthe
aftermarketradio.
3. Mountthebracket/pocket
assemblytotheradiowiththe
screwssuppliedwiththeradio.
(FigureB)
4. Snaptheradiohousingtrimpanel
intothefactorytrimbezelfromthe
backsideofthebezel.(FigureC)
5. Locatethefactorywiringharness
andantennapluginthedashand
makeallnecessaryconnectionsto
thenewradio.Metrarecommends
usingthepropermatingadapters
fromMetraand/orAXXESS.
6. Afterconnectingallwiring,mount
thenewradioassemblyintothe
dashwiththefactoryscrewsand
reassemblethedashinreverse
orderofdisassembly.
3
(Figure A)
(Figure B)
(Figure C)