User Manual

ManualsBrandsMetra ManualsAutomotiveMetra 95-5000B Double DIN Installation Dash Kit for 2000-2006 Lincoln LS or 2002-2005 Ford T-Bird (Black, Silver)

INSTALLATION INSTRUCTIONS FOR PART 95-5000

95-5000B

95-5000S

KIT FEATURES

• Double DIN Radio Provision

• Stacked ISO Mount Units Provision

• Painted

To Matc

h Factory Dash:

95-5000B = BLACK

95-5000S = SILVER

• A) Radio Housing • B) Radio Housing Brackets

KIT COMPONENTS

• Phillips Screwdriver

• Small Flat Blade Screwdriver/ Panel Removal Tool

1-800-221-0932

TION

www.metr

aonline.com

TOOLS REQUIRED:

APPLICATIONS

LINCOLN LS 2000-2006

FORD Thunderbird 2002-2005

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 95-5000 APPLICATIONS LINCOLN LS 2000-2006 FORD Thunderbird 2002-2005 95-5000B 95-5000S KIT FEATURES • Double DIN Radio Provision • Stacked ISO Mount Units Provision • Painted To Match Factory Dash: 95-5000B = BLACK 95-5000S = SILVER KIT COMPONENTS • A) Radio Housing • B) Radio Housing Brackets A B TOOLS REQUIRED: • Phillips Screwdriver • Small Flat Blade Screwdriver/ Panel Removal Tool 1-800-221-0932 www.metraonline.
PAGE 2
95-5000 TABLE OF CONTENTS Dash Disassembly - LINCOLN LS 2000-2006/LINCOLN Thunderbird 2002-2005 . . . . . . . . . . . . 1,2 Kit Assembly - Double DIN Radio Provision/Stacked ISO Mount Units Provision . . . . . . . . . 3 Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 *Note: Refer also to the instructions included with the aftermarket radio.
PAGE 3
95-5000 DASH DISASSEMBLY LINCOLN LS 2000-2006 FORD THUNDERBIRD 2002-2005 A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove the A/C vent panel. (Figure A) 3 Remove (2) 10 MM bolts exposed behind vent panel from top of radio brackets. (Figure B) 4 Unclip and remove the panel surrounding the ashtray. (Figure C) B Continued on page 2.
PAGE 4
95-5000 DASH DISASSEMBLY LINCOLN LS 2000-2006 FORD THUNDERBIRD 2002-2005 D 5 Remove (2) Phillips screws exposed behind panel then remove the ashtray assembly. (Figure D) 6 Remove (2) 10 MM bolts from inside ashtray cavity from bottom of radio brackets. (Figure E) 7 Unplug and remove radio/climate control assembly from dash then remove (4) Phillips screws securing the climate controls to the assembly.
PAGE 5
95-5000 KIT ASSEMBLY DOUBLE DIN/STACKED ISO MOUNT UNITS PROVISION *Note: Refer also to the instructions included with the aftermarket radio. A 1 Mount the climate control into the radio housing brackets. (Figure A) 2 Mount the Double DIN/ Stacked ISO mount unit(s) into the radio housing bracket/climate control assembly using screws supplied with the unit(s). (Figure B) 3 Attach the radio housing to the radio/climate control assembly. (Figure C) B Continue to final assembly.
PAGE 6
95-5000 FINAL ASSEMBLY FINAL ASSEMBLY A (A) Strip wire ends back 1/2" B (B)Twist ends together (C)Solder (D)Tape C D 1 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.) 2 Re-connect the negative battery terminal and test the unit for proper operation. 3 Reassemble radio and dash assemblies in reverse order of disassembly.
PAGE 7
95-5000 NOTES 5
PAGE 8
95-5000 INSTRUCTIONS 1-800-221-0932 www.metraonline.com REV.