Datasheet

MX-5200 Dual Simultaneous
4
Four mode indicators:
Ready Mode: The hand-piece is removed from the workstand, ready
for soldering or rework.
Power Mode: The hand-piece's tip is in contact with the load.
The power indication meter provides graphical and numeric
feedback on the system power output.
Sleep Mode : The hand-piece is at rest in the workstand; power
is reduced to the hand-piece.
Powersave Mode: Power to the hand-piece is shut off. This
programmable sleep feature allows an operator to set the desired
time to cut off power to the hand-piece (from 10 to 120 min.).
Soldering, Desoldering & Rework Systems
The MX-5200 Soldering, Desoldering and Rework Series has the same
increased power and process control as the MX-5000 Series, now with dual-
simultaneous ports.
For two users or single user with dual applications. The MX-5200 can be
operated with two hand-pieces dynamically sharing the 80 watts output power
based on demand adding even more application flexibility and speed.
Fast time-to-recovery. Delivers increased production rates and throughput
no matter the application. The challenges of high mass components,
multilayered boards and lead-free solders are seamlessly tackled by the MX-
5200 super-charged power supply.
SmartHeat process control. The technology built-in every Metcal System
means that soldering and rework are always performed at safe, controlled
temperatures. Metcal users know that moderate fixed temperatures, where
power is varied, provides the best assurance for a well controlled soldering
and rework process.
TipSaver
™
Workstand improves tip life as well as operator
ergonomics. This “Auto-Sleep” Workstand reduces the power to the
hand-piece when it is placed in the Metcal TipSaver
™
Workstand.
Reduction in power will substantially decrease tip
oxidation, a major cause of reduced tip life.
Ergonomic Hand-pieces. The aluminium hand-pieces for soldering and
rework provides a cooler, lighter weight and more comfortable feel for the
operator. And, the Metcal UltraFine
™
Hand-piece features a new generation
of extremely fine diameter cartridges in a slim profiled handle. Both of these
hand-pieces uniquely offer users a choice of three interchangeable grips.
ESD safe and features incoming AC ground monitoring circuitry. The AC
(mains) ground monitor detects power line ground failure, immediately
alerting the operator and shuting down the system. Only after the power line
ground has been restored can the MX-5200 be restarted and soldering
operations can be resumed.
Built-in power indication meter with digital display and bar graph that
visually provides the operator with feedback on the status of the soldering
operation. Whether using a large mass rework tip for QFPs or a fine-point
soldering tip, the power indication meter is a valuable resource for making
consistent, acceptable solder joints.
www.metcal.com