Datasheet

MFR-1100 & MFR-2200 Series
22
Soldering & Rework Systems
Key Features &Benefits
w SmartHeat
®
Technology provides exceptional power
for high thermal demand applications
w Single or Dual simultaneous outputs allow for single
or dual hand-piece use
w Five hand-pieces available for increased application
solutions for soldering, desoldering (upgrade kit)
and rework on one system
w Each hand-piece has a comprehensive range of
cartridges or tips for maximum flexibility
w Ergonomic hand-pieces for operator safety and
comfort
Other Accessories Available:
MFR-CA3 Coil Assembly for Tip Hand-piece (MFR-H2-ST2)
WS1G Auto-sleep Workstand, Green
MFR-PM70 Power Meter
AC-CP2 Cartridge / Tip Removal Pad
AC-BP Brass Pad (for Workstand) - Pack of 10
MFR-2200, MFR-1100 and MFR-1300 series (shown on page 14)
MFR-2200 and MFR-1100 series
Technical Specifications
Power Supply MFR-1100 MFR-2200
Ambient Operating Temperature 10 - 40°C (50°F - 104°F) 10 - 40°C (50°F - 104°F)
Maximum Enclosure Temperature 55°C (131°F) 55°C (131°F)
Input Line Voltage 100 - 240 VAC 100 - 240 VAC
Power Consumption 70 Watts maximum 130 Watts maximum
Input Line Frequency 50/60 Hz grounded circuit * 50/60 Hz grounded circuit *
Output Power 60 Watts at 22°C * 60 Watts at 22°C per output (2 outputs)*
Output Frequency 450 KHz 450 KHz
Power Cord (3-wire) 183 cm 18/3 SJT 183 cm 18/3 SJT
Dimensions (approx.) W x D x H 90mm (3.5”) x 142mm (5.6”) 170mm (7") x 200mm (8")
x 197mm (7.8”) x 152.5mm (6")
Weight 2.3kg (5.05 lbs) 2.97 kg ( 6.55 lbs)
Surface Resistivity 10
5
-10
9
Ohms 10
5
-10
9
Ohms
Certification / Marking cTUVus, CE cTUVus, CE
Soldering Handle and Coil Assembly
Tip-to-Ground Potential < 2 mV RMS < 2 mV RMS
Tip-to-Ground Resistance <2 ohms <2 ohms
Idle Temperature Repeatability ± 1.1°C (2°F) in still air ± 1.1°C (2°F) in still air
Handle Cord Assembly Length 122 cm – burn proof, ESD safe 122 cm – burn proof, ESD safe
Connector 8-pin circular DIN 8-pin circular DIN
Workstand W x D x H 100 mm (4") x 200 mm (8") 100 mm (4") x 200 mm (8")
x 100 mm (4") x 100 mm (4")
Workstand Weight 0.69 kg (1.51 lbs) 0.69 kg (1.51 lbs)
* RF SmartHeat Technology provides greater power. More details at www.metcal.com/smartheat
www.metcal.com