Operation Manual

Using the digital surround processor

Changing the DSP preset

You will be able to choose any of the predefined DSP presets, or

any user-defined presets you have stored.

The following table gives the sequence of DSP presets for each

audio format, followed where appropriate by the abbreviated

name used on the display:

Audio format Presets

Two-channel (PCM) Direct, Music, Trifield, Ambisonic

(Ambisonic), Super Stereo (Super),

Stereo, Music Logic (MusLogic),

Pro Logic (ProLogic), THX Cinema

(THX), Mono, Academy, TV Logic

Dolby Digital Dolby Digital (Digital),

Dolby Digital THX (Dig THX)

DTS DTS, DTS THX, DTS Music (DTS Mus)

MPEG MPEG, MPEG THX,

MPEG Music (MPEG Mus)

MLP (MLP version only) MLP

In each case these will be followed by any user-defined presets

you have stored for the appropriate audio format.

Each source has a set of DSP presets associated with it, one for

each of the alternative audio formats: two-channel (PCM), Dolby

Digital, DTS, MPEG, and MLP.

When you choose a source an appropriate DSP preset is

selected for the incoming audio format.

For example, if you have selected the CD source and are playing

a conventional CD, the Trifield DSP preset will initially be

selected. You may then wish to choose a different DSP preset,

such as Music or Ambisonic.

You can also change the default DSP preset associated with the

source; See Changing the DSP preset for a source, page 30.

To change the DSP preset

●Press > or < until the display shows

the current DSP preset; for example:

Music

●Press A or V to step between the different DSP presets.

If you are using a Meridian DSP Loudspeaker, display the

current preset by pressing Function > or Function <, and

change the preset by pressing Function A or Function V.