Installation & Assembly

Step 1:
Sofa Loveseat Recliner
Parts list on the right A BACK 1
B
SEAT
1
C
Power Cord
(Pre-at
tached)
1
ASSEMBLY INSTRUCTIONS
RECLINER
Note
:
1:To help prevent shock and or damage to your product only plug the power cord into a grounded outle
t.
2:Do Not Plug the power source into a power outlet until your product is completely assembled and position where you intend to use it
Caution
:
Read the Operating Instruction supplied before operating your power mechanized equipment.
Do not allow children to play on or operate this power mechanized equipment
Note:Power cord is tied on the mechanism under the seat
PARTS LIST:
Step 2: Attached the KD bac to the base frame by
aligning the brackets with the mechanism
post as seen at the left. After agligning both sides, push
firmly in a downward motion until you hear a clicking
noise. The noise indicates the back is locked to the base
frame. Please make sure both sides are locked in
position. Attached the outside backflap to the bottom of the wooden raik by
tuck the velcro.(As shown on right)
Step 3:
Connect the power cord to a power source.
Picture shown for reference only.
a.
b.
b.
a.
A
B
a.
b.
b.
a.
You can find this power cord
is �ed well on the
mechanism which under the
seat.
A
B