Operation Manual

High-beam headlamps
X
Switch off the lights.
X
Open the hood.
X
Turn housing cover : counter-clockwise
and pull it out.
X
Turn bulb holder ; counter-clockwise and
pull it out.
X
Take the bulb out of bulb holder ;.
X
Insert the new bulb into bulb holder ;.
X
Insert bulb holder ; into the lamp and turn
it clockwise.
X
Align housing cover : and turn it clock-
wise until it engages.
Turn signal
X
Remove the cover in the front wheel hous-
ing (Y page 131).
X
Turn housing cover : counter-clockwise
and pull it out.
X
Turn bulb holder ; counter-clockwise,
unlock it and pull it out.
X
Take the bulb out of bulb holder ;.
X
Insert the new bulb into bulb holder ;.
X
Insert bulb holder ; into the lamp and turn
it clockwise.
X
Align housing cover : and turn it clock-
wise until it engages.
X
Replace the cover in the front wheel hous-
ing (Y page 131).
Changing the rear bulbs
Opening and closing the side trim pan-
els
Example: right-hand side trim panel
You must open the side trim panel in the trunk
before you can change the bulbs in the tail
lamps.
X
To open: release right or left side trim
panel : at the top and fold it down in the
direction of the arrow.
X
To close: insert side panel :.
Tail lamps
X
Switch off the lights.
X
Open the trunk.
X
Open the side trim panel (Y page 132).
132
Changing bulbs (vehicles with halogen headlamps)
Lights and windshield wipers