Owners Manual

R
a valid and operational SIM card must be
inserted in the mobile phone.
R
the mobile phone is connected to COMAND
via Bluetooth
®
.
If you cannot make an emergency call, you
must arrange rescue measures yourself.
X
Enter numbers using the number keypad
(Y page 184).
X
Press the 6 button.
The telephone makes the connection.
X
Wait for the emergency call center to
respond
and then describe the emergency.
i
If
no SIM card has been inserted in a GSM
phone or if there is no service available for
a CDMA phone, the NO SERVICE message
appears in COMAND. In this case, an
emergency call can only be transmitted via
the mobile phone itself and not via
COMAND.
Telephony via the Bluetooth
®
interface
Conditions
On the mobile phone
For telephony via COMAND's Bluetooth
®
interface, a Bluetooth
®
-capable mobile
phone is required.
i
Not all mobile phones available on the
market are equally suitable. More detailed
information
on suitable mobile phones and
on connecting Bluetooth
®
-capable mobile
phones with COMAND can be found on the
Internet at
http://www.mbusa-mobile.com. Or call
the Mercedes-Benz Customer Assistance
Center on
1-800-FOR-MERCedes(1-800-367-6372)
(for the USA) or Customer Relations on
1-800-387-0100 (for Canada).
The battery of the mobile phone should
always be kept sufficiently charged in order
to prevent malfunctions.
In preparation for telephoning via the
Bluetooth
®
interface, you should check the
following
items on your mobile phone (see the
mobile phone operating instructions):
X
Hands-Free Profile
The mobile phone must support Hands-
Free Profile 1.0 or above.
i
Certain
displays and functions (e.g. signal
strength display, conference connection)
are available, depending on the supported
version of the Hands-Free Profile.
X
Bluetooth
®
visibility
On
certain mobile phones, the device itself
must be made "visible" for other devices,
as well as activating the Bluetooth
®
function (see the mobile phone operating
instructions).
X
Bluetooth
®
device name
Every Bluetooth
®
device has its own
Bluetooth
®
device name. This device name
is freely definable, but can be identical for
all devices from the same manufacturer. It
is therefore recommended that you change
this name so that you can easily recognize
your mobile phone (see the mobile phone
operating instructions).
X
Switch on the mobile phone and enter the
PIN when prompted to do so (see the
mobile phone operating instructions).
X
Activate Bluetooth
®
functions and, where
necessary, Bluetooth
®
visibility on the
mobile phone (see the mobile phone
operating instructions).
In COMAND
X
Activate the Bluetooth
®
function in
COMAND (Y page 132).
Connecting a mobile phone
General information
Before using your mobile phone with
COMAND for the first time, you will need to
connect it.
Telephone
179
COMAND
Z