Use And Care Manual

ManualsBrandsMemorex ManualsElectricalWireless HDMI Streaming Device

I'll bring entertainment to your big screen.

MWD38 v2200-01

Wireless HDMI Streaming Device

1 52 3 4

Connecting to Wi-Fi with a Mobile Device

1. Open your phone/tablet's Wi-Fi Settings menu.

2. Select "MWD38B-xxxxx" and enter the password "12345678."

3. After connecting to the Streaming Device, open an internet browser on your phone/tablet and enter the IP

address at the top of your television screen. When the web page opens, press the "Wi-Fi" icon.

4. Press "Scan."

5. Select your Wi-Fi network from

the list and enter your Wi-Fi

network password, then press

"Join" or "Connect." The IP

address on your television

screen will change and an

icon will appear showing the

Streaming Device is connected

to your Wi-Fi network. You can

now use screen mirroring on

your device to stream apps

using your Wi-Fi network.

Connect the Wireless HDMI Streaming Device to Your TV

System Requirement: Android 4.4 and above, iOS 8 and above, Window 8.1 and above (Intel Processor),

MAC 10.9 and above.

1. Connect the Streaming Device to any media player (TV, projector, etc.) with an HDMI port.

2. Connect the USB plug to a USB port on the media player or a USB power adapter (not included).

3. Set the media player's source to the HDMI input to which the Streaming Device is connected. An image

should now be displayed from the Streaming Device.

LED Indicator

Reset Button

If the device is

having trouble

connecting, press

and hold for 10

seconds to reset.

Note:

You must use the included USB power cord and Wi-Fi

attachment, otherwise the Streaming Device will not be able to

connect to Wi-Fi.

The Streaming Device only works on the 2.4GHz Wi-Fi frequency.

Summary of content (4 pages)

PAGE 1
Wireless HDMI Streaming Device I'll bring entertainment to your big screen. MWD38 v2200-01 Connect the Wireless HDMI Streaming Device to Your TV System Requirement: Android 4.4 and above, iOS 8 and above, Window 8.1 and above (Intel Processor), MAC 10.9 and above. 1 1. Connect the Streaming Device to any media player (TV, projector, etc.) with an HDMI port. 2. Connect the USB plug to a USB port on the media player or a USB power adapter (not included). 3.
PAGE 2
Screen Mirroring with Apple iOS or Android Smart View/Miracast 1 1. To play media on an Apple 2 3 4 5 1 2 3 4 device: Drag up from the bottom of the screen and select "Screen Mirroring" > MWD38Bxxxxx. 2. To play media on an Android device: Drag down from the top of the screen, open the Settings Menu and select "Connected Devices." 3. Choose "Wireless Display." 4. Select "MWD38B-xxxxx" and press "Connect.
PAGE 3
Connecting Steps - Windows 10 1. From the Start Menu, open "Settings." 1 2 3 4 5 6 2. Open "System." 3. Under "Multiple Displays," click "Connect to a wireless display." 4. Choose "MWD38B-xxxxx" from the menu on the right of the screen. 5. Once selected, click "Change Projection Mode." 6. Choose "Duplicate" from the options. Note: If the Streaming Device cannot be selected or it won't play correctly, it may be connected to another mobile device already.
PAGE 4
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. This product meets and complies with all Federal regulations. FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2.