Operation Manual

STEP 2. Drill Holes
1)Place the roof gasket(#5) in the chosen location and mark 1 center hole and 4 screw holes on the roof.See Figure2
2)Remove the roof gasket(#5) and drill the aboved-mentioned 5 holes accordingly on the roof
4 holes for screws
Hole for
coaxical cable
STEP 4. Fix the Antenna
1)Place the water-proof washer(#4) correspond to the 4 screw holes.
2)Run antenna cable through the center hole of the roof. See Figure8
3)Put 4 carriage bolts(#7) through the mount and washer(#4) and roof.See Figure9
4)Go inside the vehicle / yacht. Pull the antenna cable through the roof gasket(#5) and fix the 4 carriage bolts (#7) with screw sets(#6)
accordingly inside the roof. See Figure10
Figur e 2
Figur e 5
Figur e 3 Figur e 4
Figur e 6 Figur e 7
Figur e 8 Figur e 9
Figur e 10
STEP 3. Install the Antenna
1)Gently pull the antenna cable through the mount.See Figure 5
2)Slide the antenna onto the mount. See Figure 6.Then slide the hexagon Nuts in the opposite direction to lock it tighter. See Figure 7
STEP 2. Drill Holes
1)Place the roof gasket(#5) in the chosen location and mark 1 center hole and 4 screw holes on the roof.See Figure2
2)Remove the roof gasket(#5) and drill the aboved-mentioned 5 holes accordingly on the roof
4 holes for screws
Hole for
coaxical cable
STEP 4. Fix the Antenna
1)Place the water-proof washer(#4) correspond to the 4 screw holes.
2)Run antenna cable through the center hole of the roof. See Figure8
3)Put 4 carriage bolts(#7) through the mount and washer(#4) and roof.See Figure9
4)Go inside the vehicle / yacht. Pull the antenna cable through the roof gasket(#5) and fix the 4 carriage bolts (#7) with screw sets(#6)
accordingly inside the roof. See Figure10
Figur e 2
Figur e 5
Figur e 3 Figur e 4
Figur e 6 Figur e 7
Figur e 8 Figur e 9
Figur e 10
STEP 3. Install the Antenna
1)Gently pull the antenna cable through the mount.See Figure 5
2)Slide the antenna onto the mount. See Figure 6.Then slide the hexagon Nuts in the opposite direction to lock it tighter. See Figure 7
STEP 2. Drill Holes
1)Place the roof gasket(#5) in the chosen location and mark 1 center hole and 4 screw holes on the roof.See Figure2
2)Remove the roof gasket(#5) and drill the aboved-mentioned 5 holes accordingly on the roof
4 holes for screws
Hole for
coaxical cable
STEP 4. Fix the Antenna
1)Place the water-proof washer(#4) correspond to the 4 screw holes.
2)Run antenna cable through the center hole of the roof. See Figure8
3)Put 4 carriage bolts(#7) through the mount and washer(#4) and roof.See Figure9
4)Go inside the vehicle / yacht. Pull the antenna cable through the roof gasket(#5) and fix the 4 carriage bolts (#7) with screw sets(#6)
accordingly inside the roof. See Figure10
Figur e 2
Figur e 5
Figur e 3 Figur e 4
Figur e 6 Figur e 7
Figur e 8 Figur e 9
Figur e 10
STEP 3. Install the Antenna
1)Gently pull the antenna cable through the mount.See Figure 5
2)Slide the antenna onto the mount. See Figure 6.Then slide the hexagon Nuts in the opposite direction to lock it tighter. See Figure 7
STEP 2. Drill Holes
1)Place the roof gasket(#5) in the chosen location and mark 1 center hole and 4 screw holes on the roof.See Figure2
2)Remove the roof gasket(#5) and drill the aboved-mentioned 5 holes accordingly on the roof
4 holes for screws
Hole for
coaxical cable
STEP 4. Fix the Antenna
1)Place the water-proof washer(#4) correspond to the 4 screw holes.
2)Run antenna cable through the center hole of the roof. See Figure8
3)Put 4 carriage bolts(#7) through the mount and washer(#4) and roof.See Figure9
4)Go inside the vehicle / yacht. Pull the antenna cable through the roof gasket(#5) and fix the 4 carriage bolts (#7) with screw sets(#6)
accordingly inside the roof. See Figure10
Figure 2
Figure 5
Figure 3 Figure 4
Figure 6 Figure 7
Figure 8 Figure 9
Figure 10
STEP 3. Install the Antenna
1)Gently pull the antenna cable through the mount.See Figure 5
2)Slide the antenna onto the mount. See Figure 6.Then slide the hexagon Nuts in the opposite direction to lock it tighter. See Figure 7