Check that the unit has not been damaged during transport Protection Against Fire 1. 2. 3. 4. 5. Maintain a minimum of 1 foot distance from any type of flame. Replace fuse only with the specified type and rating. Do Not install the unit to close to a heat source. Make sure cable are properly secured away from unit movement. Maximum surface operating temperature 80º. Protection Against Fire 1. 2. 3. 4. Disconnect power before servicing. For connection to main power supply proceed to page 4.
Technical Features Part Numbers Fixture Flight Case 1100 - AXIS LED P-1100DUALCASE Mechanical Specifications 7” 9.25” Pan: 360° Tilt: 270° DMX Connectors: 3-pin XLR connectors Thermal: Maximum ambient temperature 35° C Maximum surface temperature 80° C Mounting Points: 2 pairs of L-turn locks Fastening System: 2 quick clamp release 3.5” 9.5” 10.75” Packaged for Shipping Fixture 4.75” Size: 12.25”L x 13.5”W x 14.25”H Size: 16.5”L x 16.5”W x 19”H Weight: 24 lbs Weight: 28 lbs 12.
Main Power Connection Caution! 1. 2. 3. Do not connect fixture to a dimmer system. This unit must be earthed. (electronically grounded) Replace fuse only with the specified type and rating. The occupation of the connection-cable is as follows: 110V 50/60hz Connection Cable (USA) Cable (EU) Pin International Brown Brown Live L Light Blue Light Blue Neutral N Yellow/Green Yellow/Green Pin DMX-512 Connection The fixture is equipped with 3 pin XLR Sockets for DMX input and output.
Rigging the fixture Caution! 1. 2. 3. 4. The installations must be carried out by an authorized dealer or trained professional. Unit may cause severe injures if you have doubts concerning the safety do not install. Unit is to be 24inches away from flammable materials (decoration material) Use high quality installation equipment to hang unit. When rigging a unit it is very important that you follow common safety procedures.
Axis LED DMX profile-version 1.
Main Control Menu The control board on the fixture base is your interface to access and control all the functions on the unit. Its digital display gives you a code view of the options and functions including errors and diagnostics. The following will explain each function and its options. Press Mode button to scroll through the different options.
Cleaning and maintenance Installation Maintenance: The operator has to make sure that the unit is operating safely and has the installations and electronics checked by an expert every 2 years. The following points have to be considered during the inspection: 1) All screws used for installing the device or part of the device have to be tightly connected and must not be corroded. 2) There must not be any deformations on the housing, fixation and installation spots (ceiling, suspension, trussing).
Mega-Lite 5718 Kenwick St San Antonio, TX 78238 Ph 210-684-2600 Fax 210-855-6279 www.mega-lite.com / info@mega-lite.