CATALOG Product Image Parts Listing Installation Notes Tools Required Installation Steps Safety Tips B Troubleshooting Guide Customer Service iB
S508 PARTS LISTING Name Name | Picture 1 Slide Glass 1 Fixed Glass ® Glass Bracket Guide Rail b Middle Snead Rotter Side Sal Anith-juiriging kraal Anti-Splash Threshold @ @® ee Wall Bracket Sean Plug Soft Close Snow STEM Glass Fastener Punch Template ® ee Curie Blog lee Allen Key Candle @ oe ntl FRAGILE WITH PARE LIFT Please keep this manual and product code number for future reference and for-ordering replacement parts if necessary,
PARTS LISTING Aluminum punch template Wall Bracket ({missing or broken, please refer 16 page 8.
PARTS LISTING oft close Guide Rail Door Seal Glass Il ho Anti-Splash Threshold Screw & Allen key
NOTES BEFORE INSTALLATION repair the tools. (Please refer to page 6) All measurements and installation should do after the wall and shower base were completed. I Make sure shower base is horizontal and both wall are vertical. if shower base not horizontal or the wall not vertical, please contact our installation support. ER Understand the nannies and uses of individual accessories of shower door. (Please refer to page 2~4) Installation by licensed professional contractor is recommended.
TOOLS REQUIRED {Please bring your own tools) (we offer) Aluminum punch template Spirit level Tape measure Power drill Screw driver Drill Bits 5/16" Rubber hammer Hacksaw EE —— hr Silicone Gun Modified Ypsilanti) Polymer
INSTALLATION STEPS Measuring Slide Glass Roller Punching Anti-Jumping Knob Wall bracket Handle Door seal Guide rail Bottom anti-splash threshold Fixed Glass Glass fastener Gluing Glass guide block Soft close “Customer Service 470-926-8618 321-946-6293
3.15 Ml J (There are 2 kinds of aluminum punch templates; suitable for left or right-opening.2 Kinds of random shipping. Punching ss the bots Berle glass bracket perfectionist on needs to He TEE outside this vertices! sure of will Bratkenpinel position, So. ease the fiberglass swiveled revulsion plenitude wil The attached aluminum template is for reference, if punch method and opening is consistent with the illustration, punch templates can be Used, if not please refer to step 2 of punch data.
Gif the guide rai reed to be cut to match your shower opening please do it based sin actual measurements.
C3 Bi install the glass fasteners at the top of fixed glass according tithe illustration, Fasteners can be slightly adjusted to match glass mounting offsets D2 mp @& Install the glass bracket at Lhe bottom fixed glass according to the illustration, S10
(feet the fixed glass installation is completed, oo Ber please measure the glass with level tiler to confirm the vertical and horizontal of the glass and. then install the glass guide block Ensure. the vertical condition of the fixed glass:after the guide block is installed.
Blocking @soft-close fixed position: please adjust the soft close to the right position after thi door to allow forth width of door seal, installation door seal before test).
install the handle as illustrated.
(install the according to the guidelines, please cut to the right chive according to the width of your shower opening. Cleanup the garbage and dry the water and stains with a soft cloth after installation then appliqueing glass glue. Note: Please dry for 24 hours feather glass glue is applied before use. 14.
SAFETY TIPS: . Do not remove the slide glass protect corners during installation, remove them only after installation is complete. Wear protective equipment when drilling, cutting guide rail and anti-splash threshold. a Careful installation of the glass is required during installation; please do not step on the glass to avoid bumping. I Wait 24 hours after installation before using the shower. SHOWER DOOR MAINTENANCE AND CARE: Shower door glass is double-sided easy-clean glass.
TROUBLESHOOTING GUIDE AND NOTE Wall bracket punching issues: 1:1 got the vertical punching data, but I'm not sure horizontal data, please advise. AT: When your threshold width is 3" or wider, the vertical surface of wall bracket drilling position can be in the middle of threshold If your threshold width is less than 3", the vertical surface of wall bracket drilling position is 1 1/4" away from exterior vertical surface of threshold.
TROUBLESHOOTING GUIDE AND NOTE Soft-close installation Issues: 1: The anti-jump knob can not drive the soft-close inner hook to open position when open the road, and resulting in the soft-close inner hook back to close the door position. How to solve knob is too low) #1: The height of anti-jump knob is too low; anti-jump knob distance from the bottom to the soft-close groove should be 0.04" (tummy.
Please contact our customer service to confirm the return steps before returning or get order replacement. Customer Service: 470-926-8618 321-946-6293 Installation Video: www.mcocodsupport.com Return Address: +4800 Little John St.