CATALOG Product Image Parts Listing EA Installation Notes Ah Tools Required Installation Steps Safety Tips Troubleshooting Guide IB 16% Customer Service
PARTS LISTING S504 Name LL Name | Picture z © 1 Shine Glass fined Glass 1 Finessed Glass Seal Anti Splash Guile Rail Shallot Roller Serial Plug Glass Fastener, Resew Texas Wall Bracket 7 Glass Bracket @ @® ee Ant Collision Punch Block Template Guide Block Alter Key ® ee Hallie @ Sidle Heat HANDLE 2 PERSON FRAGILE WITH CARE LITE Please keep this manual and product code number for future reference and for-ordering replacement parts if necessary, a.
PARTS LISTING Aluminum punch template Wall Bracket {If missing or broken, please: refer to page 8 for punch data) Anti Collision Block Roller Handle Guide Block Glass Fastener Glass Bracket
NOTES BEFORE INSTALLATION Prepare the tools. (Please refer to page 6) All measurements and installation should do after the wall and shower base were completed. Bi Make sure shower base is horizontal and both wall are vertical, if shower base not horizontal or the wall not vertical, please contact our installation support. Es Understand the names and uses of individual accessories of shower door: (Please refer to page 2~4) Installation by licensed professional contractor is recommended.
TOOLS REQUIRED {Please bring your own tools) (we offer) Aluminum punch template Spirit level Tape measure Power drill Screw driver Drill Bits 5/16" Rubber hammerer Hacksaw en hae Silicone Gun Modified Ypsilanti) Polymer 6.
INSTALLATION STEPS Measuring Glass guide block Punching Slide Glass Roller Wall bracket Handle Door seal Guide rail Bottom anti-splash threshold Roller Gluing Fixed Glass *Customer Service 470-926-8618 321-946-6293
3.15 Ml J (There are 2 kinds of aluminum punch templates; suitable for left or right-opening.2 Kinds of random shipping. Punch ss the tube Berle glass bracket perfectionist on needs to Bertie thi versed subdivide of wall Keypuncher passion, to cur that the died glass is installed on the outside of guide rail The attached aluminum templates for reference, if punch method and opening is consistent with the illustration, punch templates can be Used, if not please refer to step 2 of punch data.
Saga ew “s 3 the guide rail mead to be cut to-match your shower opening please do it based oi actual measurements. If stretch the product installation width please adjusting the.insertion depth:of the wall bracket to the guide rail without cutting the guide rail. $504 has maximum installation width stretch of 1/2" for each size.
C3 Bi install the glass fixing clips at the top of fixed glass according tithe illustration, Fasteners can be slightly adjusted to match glass mounting offsets D2 np @ Install the glass bracket al the bottom of fixed glass according to the illustration, S10
(Feeder the glass installation is completed, please meas tire the glass with level ruler to confiding the vertical and horizontal of the glass dnd then install glassiness guide block Ensure the vertical condition of the glass after the guide block is installed.
@ Please follow the guide to install the handle and the bottom rollers. install the rollers under guide rail and adjust its height-to fit the bottom of guide rail. install the door seal as illustrated, wide door seal should be'installed on the fixed glass side. The top of wide doorstepped needs to bie lower than the bottom rollers to avid scraping. All door seals should be installed starting from the bottom and working upwards 12.
(install the anti-splash-threshold according to the guidelines, please cut to the right chive according to the width of your shower opening.
SAFETY TIPS: : Do not remove the slide glass protection corners during installation, remove them only after installation is complete. Wear protective equipment when drilling, cutting guide rail and anti-splash threshold. ma Careful installation of the glass is required during installation, please do not step on the glass to avoid bumping #5 Wait 24 hours after installation before using the shower. SHOWER DOOR MAINTENANCE AND CARE: Shower door glass is double-sided easy-clean glass.
TROUBLESHOOTING GUIDE AND NOTE Shower doors don't close tightly issues: 1: When | close the door, the door closes then backs out and never closes tight. How should | do? Al: First please check that the anti collision block is installed on both sides, it will hold the glass in place when closing the door to keep it closed. Then use a level to check your guide rail and glass level status, if not installed level, you can adjust the top roller to adjust the sliding glass level and height.
Please contact our customer service to confirm the return steps before returning or get order replacement. Customer Service: 470-926-8618 321-946-6293 Installation Video: www.mcocodsupport.com Return Address: +4800 Little John St.