PRO MAC 72 GR ™HMANTIKE™ ¶†HPOºOPIE™ ¢È·‚¿ÛÙ ÙÔ ÚÈv ·fi ÙË ¯Ú‹ÛË Î·È Ê˘Ï¿ÍÙ ÙÔ ÁÈ· v· ÙÔ Û˘Ì‚Ô˘Ï‡ÂÛÙ ÛÙÔ Ì¤ÏÏÔv
A. B.
C. D. 1 ltr.
E. F. G.
H. I. L.
A SUMMARY CHART TO IDENTIFY THE CORRECT COMBINATION OF BAR/CHAIN - FILE/FILE HOLDER D TABELLA RIASSUNTIVA PER IL CORRETTO ABBINAMENTO BARRA/CATENA - LIMA/GUIDA- LIMA B TABLEAU RECAPITULATIF POUR LE CORRECT ACCOUPLEMENT CHAINE/GUIDE CHAINE LIME/PORTE LIME C TABELLE FÜR DIE KORREKTE KOMBINATION VON STANGE/KETTE - FEILE/FEILENFÜHRUNG E TABLA PARA EL CORRECTO ACOPLAMIENTO DE LA CADENA/BARRA DE GUÍA - LIMA/GUÍA DE AFILADO F OVERZICHTSTABEL VOOR EEN CORRECTE STANG/KETTING - VIJL/VIJLLEIDER VERBINDING s SAMMANFATT
THIS PRODUCT MEETS THE SAFETY STANDARD REQUIREMENT OF THE EUROPEAN MACHINERY DIRECTIVE DISPLACEMENT (cm ).................................................................................................. BORE AND STROKE (mm) ........................................................................................... ENGINE OUTPUT (kW) ................................................................................................. ENGINE SPEED AT MAX POWER (min ) .............................................
UK ENGLISH A GENERAL DESCRIPTION 1. SAFETY CHAIN BRAKE 2. STARTER HANDLE 3. THROTTLE TRIGGER 4. THROTTLE TRIGGER LOCKOUT 5. CHOKE KNOB 6. FUEL TANK CAP 7. CHAIN CATCHER 8. CHAIN BRAKE AND CLUTCH COVER 9. FRONT HANDLE 10. REAR HANDLE 11. STOP SWITCH 12. OIL TANK CAP 13. THROTTLE ADVANCE 14. BAR 15. CHAIN 16. AIR FILTER COVER 17. CARBURETTOR ADJUSTMENT SCREWS 18. BAR RETAINING NUTS 19. DECOMPRESSION VALVE 20. SPIKE 21.
tensioned. Keep the spike or the saw body against the wood when cutting. Use only genuine accessories and spare parts. We recommend you have your unit periodically checked and serviced by an authorised dealer. Do not use chainsaw above shoulder height. 5 Do not operate the chainsaw near a naked flame or spilled fuel. Only operate the chainsaw outside and in well ventilated areas. After re-fueling, always wipe off any spilled fuel. Move the chainsaw away from the fueling point before starting the engine.
UK ENGLISH IMPORTANT Always shake this fuel mix vigorously each time you use it. Fuel mix properties deteriorate with time, we therefore recommend that you only make the quantity of fuel mix you will need for each usage. Do not use fuel mix more than a week old as this could damage the engine. WARNING Do not smoke when re-fuelling. Always open the fuel cap slowly. Re-fuel in open spaces only, keeping away from naked flames or sparks. Always store fuel in an approved container.
F USAGE IMPORTANT. Before using a chain saw read carefully the Operator’s Manual and all safety precautions carefully. FELLING TREES. - Make sure that there are no bystanders or animals in the work area. - Study the direction of the fall of the tree and then plan your exit path away from the planned direction of fall. - Don’t fell trees when there is a strong wind. 1 Clear the tree base of interfering limbs and brush. Clean the work area from stones or other objects which could damage the chain.
UK 1 2 - 3 - 4 5 ENGLISH CHAIN: Check tension regularly. A new chain will require more frequent adjustment. Loosen retention nuts. adjust chain (see assembly instructions). Tighten retention nuts. BAR Clean the bar groove (K) and check the lubrication holes (L) in the bar to ensure that they are not clogged. Grease sprocket periodically. Rotate sprocket and repeat. Rotate bar periodically to maximise bar life. AIR FILTER A dust clogged air filter may cause carburetor problems.
The chain brake should snap into both positions.If strong resistance is felt or lever does not move into either position, DO NOT USE YOUR SAW. Take it immediately to an authorized servicing dealer. 3 CHAIN CATCHER This unit is fitted with a chain catcher below the drive spocket. This is intended to stop the rearward movement of th chain in case of breakage or if it should come out of the bar, It should never be removed. L CHAIN SHARPENING 1 The cutter teeth should be sharpened with a round 7/32" file.
000001➔ 99999 A EC Declaration of conformity In accordance with the EC Machine Directive (89/392/EEC, modified by 91/368/EWG), 93/68/EEC (CE Marking Directive) & 89/336/EEC (Directive on electromagnetic compatibility). Directive 2000/14/CEE (Annex V). The undersigned, Pino Todero, authorised by E.O.P.I., declares that the petrol-driven chainsaw: PRO MAC 72 serial number as above, with chain bar of cutting length 45/50/60/70 cm, manufactured by E.O.P.I.
000001➔ 99999 L Intyg angående överenstämmelse med EG I enlighet med EGs Maskindirektiv (89/392/EEC, modifierat i 91/368/EEC), 93/68/CEE (CE märkningsdirektiv) & 89/336/CEE (Elektromagnetisk kompatibilitet). Direktiv 2000/14/CEE (Annex V). Undertecknad Pino Todero, auktoriserad av E.O.P.I., intygar att bensindrivna kedjesågar: PRO MAC 72 med 45/50/60/70 cm långt svärd, vars serienummer visas ovan, tillverkade av E.O.P.I.