J16L_EA.book Page 1 Friday, February 22, 2002 11:34 AM A Word to Mazda Owners Thank you for choosing a Mazda. We at Mazda design and build vehicles with complete customer satisfaction in mind. To help ensure enjoyable and trouble-free operation of your Mazda, read this manual carefully and follow its recommendations. An Authorized Mazda Dealer knows your vehicle best. So when maintenance or service is necessary, that’s the place to go.
J16L_EA.book Page 2 Friday, February 22, 2002 11:34 AM How to Use This Manual We want to help you get the most driving pleasure from your vehicle. Your owner’s manual, when read from cover to cover, can do that in many ways. Illustrations complement the words of the manual to best explain how to enjoy your Mazda. By reading your manual, you can find out about the features, important safety information, and driving under various road conditions.
J16L_EA.book Page 3 Friday, February 22, 2002 11:34 AM Table of Contents Your Vehicle at a Glance Interior, exterior views and part identification of your Mazda. Essential Safety Equipment Use of safety equipment, including seats, seat belt system, SRS air bags and child-restraint systems. Knowing Your Mazda Explanation of basic operations and controls; opening/closing and adjustment of various parts. Before Driving Your Mazda Important information about driving your Mazda.
J16L_EA.
J16L_EA.book Page 1 Friday, February 22, 2002 11:34 AM 1 Your Vehicle at a Glance Interior, exterior views and part identification of your Mazda. Dashboard Overview .................................................................. 1- 2 Interior Overview ........................................................................ 1- 3 Exterior Overview ....................................................................... 1- 4 1-1 Form No.
J16L_EA.
J16L_EA.book Page 3 Friday, February 22, 2002 11:34 AM Your Vehicle at a Glance Interior Overview Sunvisors (page 6-41) Rearview mirror (page 3-32) Seat belts (page 2-25) Interior light (page 6-41) Rear vents (page 6-10) Front seats (page 2-3) Parking brake (page 5-5) Side air bags (page 2-47) Third-row seat (page 2-16) Rear climate control panel (page 6-12) Second-row seat (page 2-9) 1-3 Form No.
J16L_EA.
J16L_EA.book Page 1 Friday, February 22, 2002 11:34 AM 2 Essential Safety Equipment Use of safety equipment, including seats, seat belt system, SRS air bags and child-restraint systems. Seats .............................................................................................. 2- 2 Seat Arrangements .................................................................. 2- 2 Front Seats ............................................................................... 2- 3 Second-Row Seats .............
J16L_EA.book Page 2 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seats Seat Arrangements Road positions (while driving) Non-road positions (Parking/Camping) 2-2 Form No.
J16L_EA.book Page 3 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seats Front Seats ▼ Seat Slide (Manually operated seats) (Manually operated seats) WARNING WARNING Securing the Seats: Adjustable seats and seatbacks that are not securely locked are dangerous. In a sudden stop or collision, the seat or seatback could move, causing injury. Make sure the adjustable components of the seat are locked in place by attempting to slide the seat forward and backward and rocking the seatback.
J16L_EA.book Page 4 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seats (Electrically operated seats) To slide the seat, move the slide lifter switch on the outside of the seat to the front or back and hold it. Release the switch at the desired position. ▼ Seat Recline WARNING Reclining: Sitting in a reclined position while the vehicle is moving is dangerous because you don’t get the full protection from seat belts.
J16L_EA.book Page 5 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seats (Manually operated seats) To change the seatback angle, lean forward slightly while raising the lever. Then lean back to the desired position and release the lever. (Electrically operated seats) Change the seatback angle by pressing the front or rear side of the reclining switch. When the seatback is at the desired angle, release the switch.
J16L_EA.book Page 6 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seats ▼ Seat Tilt (Driver’s Seat) (Electrically operated seats) (Manually operated seats) The seat-bottom angle can be adjusted by rotating the dial. Front height adjustment Front of seat bottom To adjust the front height of the seatbottom, raise or lower the front of the slide lifter switch on the left side of the seat. Up Down Dial Rear of seat bottom Rear height adjustment Up Down Dial 2-6 Form No.
J16L_EA.book Page 7 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seats Height adjustment Height adjustment Raise the seat-bottom by pulling up on the center of the switch. Release the switch at the desired position. To raise a head restraint, pull it up to the desired position. To lower the head restraint, press the stopcatch release, then push the head restraint down. Lower the seat-bottom by pressing down on the center of the switch. Release the switch at the desired position.
J16L_EA.book Page 8 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seats ▼ Front Passenger Seat Side Table WARNING Using Seat Side Table While Vehicle is Moving: Using the seat side table while the vehicle is moving is dangerous. Hot liquids could cause scalding if spilled, or objects could fall causing injury. Do not use the seat side table while the vehicle is moving.
J16L_EA.book Page 9 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seats Second-Row Seats WARNING Stacking Cargo: Stacking luggage or other cargo higher than the seatback is dangerous. During a sudden stop or collision, objects can become projectiles that could hit and injure passengers. Don’t stack things higher than the seatback. Securing Seats: Adjustable seats and seatbacks that are not securely latched are dangerous.
J16L_EA.book Page 10 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seats ▼ Seat Slide To move the seat forward or backward, raise the lever and slide the seat to the desired position. Lever Make sure the lever returns to its original position and the seat is locked in place by attempting to push it forward and backward. ▼ Side-Sliding Seat (right side) The second-row seats can be put together and used as a bench seat. Raise the side seat-slide lever and slide the seat sideways.
J16L_EA.book Page 11 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seats Make sure the lever returns to its original position and the seatback is locked in place by attempting to push it forward and backward. CAUTION Height adjustment To raise a head restraint, pull it up to the desired position. To lower the head restraint, press the stopcatch release, then push the head restraint down.
J16L_EA.book Page 12 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seats ▼ Armrest ▼ Third-Row Seat Access The armrest can be used or placed upright. Access to the third-row seat via the sliding door Type A Type B When the second-row seats are together, move along the path between the sliding door and the side sliding seat. Armrest Armrest When the second-row seats are separated, pass between them and move to the rear of the vehicle. 2-12 Form No.
J16L_EA.book Page 13 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seats ▼ Folding the Second-Row Seats WARNING 2. Raise the reclining lever and lower the seatback forward. Make sure the seatback is locked. Using Folded Seatback as a Table While the Vehicle is Moving: Using the folded seatback as a table while driving is dangerous. During sudden braking or a collision, objects placed on the folded seatback could become projectiles that could hit and injure someone.
J16L_EA.book Page 14 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seats ▼ Removal of Second-Row Seats The second-row seats can be removed to create a more comfortable space between the third-row and front seats. Additional cargo space is available with the removal of the second-row seats and stowing of the third-row seat.
J16L_EA.book Page 15 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seats 4. Raise the reclining lever and lower the seatback forward. Make sure the seatback is locked. 7. The seat is heavier than it looks, carefully pull up and detach the seat. Get assistance to lift it out of the vehicle. Clamp Loops 5. Work only on one seat at a time to avoid one seat falling while working on another. 6. Lift and hold the seat-anchor bar and raise the entire seat up and forward.
J16L_EA.book Page 16 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seats 3. Supporting the seat with your hands, slowly lower the seat rearwards to lock it in place. Third-Row Seat WARNING Stacking Cargo: Stacking luggage or other cargo higher than the seatback is dangerous. During a sudden stop or collision, objects can become projectiles that could hit and injure passengers. Don’t stack things higher than the seatback. 4. Raise the reclining lever and lift the seatback upright.
J16L_EA.book Page 17 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seats ▼ Head Restraint NOTE When returning a third-row seat to its original position, also replace the seat belt to its normal position. Verify that the seat belt pulls and retracts. ▼ Seat Recline WARNING Reclining: Sitting in a reclined position while the vehicle is moving is dangerous because you don’t get the full protection from seat belts.
J16L_EA.book Page 18 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seats Removal To remove the head restraint, press the stop-catch release, then pull up on the head restraint. 2. Pull the third-row seat’s flat-folding strap and push the seatback down until it locks. Stop-catch release Flat-folding strap ▼ Stowing the Third-Row Seat ▼ Folding the Third-Row Seat WARNING Riding on Folded Flat Third-Row Seat: Riding on the third-row seat when it’s folded is dangerous.
J16L_EA.book Page 19 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seats Stowing the third-row seat WARNING 1. Insert the seat belts in the retainers. Riding in the Seat Well: Riding in the seat well for the thirdrow seat is dangerous. Sudden braking or a collision could cause serious injury. Do not sit on lie in the seat well while the vehicle is moving. Never ride in a vehicle where you can’t sit in the seat and wear the seat belt.
J16L_EA.book Page 20 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seats 4. Pull strap B and lift the combined seatback and seat bottom up to vertical with your other hand. Gently set the seat the remainder of the way down into the seat well. Raising the third-row seat upright for road use 1. Clear the entire cargo floor. 2. Remove the head restraints. Strap B 5. Insert the head restraints between the floor and seat at the positions indicated on the labels. 3.
J16L_EA.book Page 21 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seats 5. Pull strap A and raise the seatback upright. Attempt to move the seatback forward and backward to make sure it is locked. Strap A 6. Insert the head restraints. 7. Place the seat belt buckles face up. ▼ Third-Row Seat and Open Liftgate Position WARNING Support Bar: Sitting in the rear-facing, third-row seat position without installing the support bar is dangerous.
J16L_EA.book Page 22 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seats 6. Remove the support bar from the pocket. NOTE • Adjust the seatback to the upright position when the third-row seat is facing rearward. • Remove cargo from the seat well area before placing the third-row seat in the rear-facing position. To put the third-row seat in the rear facing position: Support bar Pocket 1. Open the liftgate. 2. Clear away all cargo from the seat well. 3. Remove the head restraints. 4.
J16L_EA.book Page 23 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seats 8. Pull the seatback towards the front of the vehicle until the opposite end of the support bar hooks onto the anchor loop in the side trim. Attempt to push the seatback towards the rear (liftgate) to make sure the support bar is securely latched. 4. Place the seat belt buckles face up. To return the third-row seat to the road position (forward facing) 1.
J16L_EA.book Page 24 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seats Flat Folding The second-row and front seats can be folded down for use as beds when the vehicle is safely parked. WARNING Full-Flat Seats: Sitting or lying on seats folded flat is a dangerous way to ride. During sudden braking or a collision you could be thrown around inside the vehicle and seriously injured. Don’t ride on seatbacks folded flat. ▼ To Fold the Seats Flat 1.
J16L_EA.book Page 25 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seat Belt Systems Seat Belt Precautions Seat belts help to decrease the possibility of severe injury during accidents and sudden stops. Mazda recommends that the driver and all passengers always wear seat belts. All of the outboard seat belt retractors are designed to keep the lap/shoulder belts out of the way when not in use.
J16L_EA.book Page 26 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seat Belt Systems CAUTION Belt retraction may become difficult if the belts and rings are soiled, so try to keep them clean. Ring ▼ Pregnant Women and Persons with Serious Medical Conditions Pregnant women should wear seat belts. Ask your doctor for specific recommendations. The lap belt should be worn SNUGLY AND AS LOW AS POSSIBLE OVER THE HIPS. Persons with serious medical conditions also should wear seat belts.
J16L_EA.book Page 27 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seat Belt Systems 3-Point Type Seat Belt ▼ Fastening the Seat Belts 1. Grasp the buckle and tongue. 2. Slowly pull out the lap/shoulder belt. Belt Tongue WARNING Positioning the Shoulder Portion of the Seat Belt: Improper positioning of the shoulder portion of the seat belt is dangerous. An improperly positioned belt will provide little or no protection in a collision.
J16L_EA.book Page 28 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seat Belt Systems ▼ Unfastening the Seat Belts ▼ Shoulder Belt Adjuster Depress the button on the buckle. Adjust the height of the shoulder belt if the seat belt touches your neck, or if it crosses your arm instead of your shoulder. To raise the shoulder belt adjuster, push the adjuster up. To lower the shoulder belt adjuster, push the button and slide it down. Make sure the adjuster is locked.
J16L_EA.book Page 29 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seat Belt Systems Front Seat Belt Pretensioner and Load Limiting Systems For optimum protection, the driver and front passenger seat belts are equipped with pretensioner and load limiting systems. In moderate or greater frontal or nearfrontal accidents, the front air bag and pretensioner systems deploy simultaneously. The pretensioners take up slack in the front seat belts as the air bags are expanding.
J16L_EA.book Page 30 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seat Belt Systems WARNING Modification or Testing of the Pretensioner System: Modifying the components or wiring of the pretensioner system, including the use of electronic testing devices is dangerous. You could accidentally activate it or make it inoperable which would prevent it from activating in an accident. The occupants could be seriously injured.
J16L_EA.book Page 31 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seat Belt Systems WARNING Self-Servicing the Air Bag/ Pretensioner Systems: Self-servicing or tampering with the systems is dangerous. An air bag/ pretensioner could accidentally activate or become disabled. This could cause serious injuries. Never tamper with the systems and always have an Authorized Mazda Dealer perform all servicing and repairs. 2-Point Type Seat Belt ▼ Fastening the Seat Belt 1.
J16L_EA.book Page 32 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seat Belt Systems • To shorten, pull the loose end of the webbing. Shorten 4. Make sure the lap belt is snugly fitted against your body. WARNING Wearing the Lap Belt: A lap belt worn too high is dangerous. In a collision, this would concentrate the impact force directly on the abdominal area, causing serious injury. Wear the lap belt snugly and as low as possible. 2-32 Form No.
J16L_EA.book Page 33 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seat Belt Systems Seat Belt Extender If your seat belt is not long enough, even when fully extended, a seat belt extender may be available to you at no charge from your Authorized Mazda Dealer. This extender will be only for you and for the particular vehicle and seat. Even if it plugs into other seat belts, it may not hold in the critical moment of a crash.
J16L_EA.book Page 34 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Seat Belt Systems Seat Belt Warning Light Seat Belt Warning Beep If the driver’s seat belt is not fastened when the ignition switch is turned to the ON position, a beep will sound for about 6 seconds. If the driver’s seat belt is not fastened when the ignition switch is turned to the ON position, the seat belt warning light will remain on until the belt is fastened.
J16L_EA.book Page 35 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Child Restraint Child Restraint Precautions Mazda strongly urges the use of child-restraint systems for children small enough to use them. You are required by law to use a child-restraint system for children in the U.S. and Canada.
J16L_EA.book Page 36 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Child Restraint WARNING Holding a Child While the Vehicle is Moving: Holding a child in your arms while the vehicle is moving is extremely dangerous. No matter how strong the person may be, he or she cannot hold onto a child in a sudden stop or collision and it could result in serious injury or death to the child or other occupants.
J16L_EA.book Page 37 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Child Restraint CAUTION A seat belt or child-restraint system can become very hot in a closed vehicle during warm weather. To avoid burning yourself or a child, check them before you or your child touches them. NOTE Your Mazda is equipped with LATCH lower anchors for attachment of specially designed LATCH child-restraint systems in the rear seats.
J16L_EA.book Page 38 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Child Restraint Installing Child-Restraint Systems Accident statistics reveal that a child is safer in the rear seats. The front passenger’s seat is clearly the worst choice for any child under 12, and with rear-facing child-restraint systems it is clearly unsafe due to air bags.
J16L_EA.book Page 39 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Child Restraint 3. To get the retractor into the automatic locking mode, pull the shoulder belt portion of the seat belt until the entire length of the belt is out of the retractor. NOTE Inspect this function before each use of the child-restraint system. You should not be able to pull the shoulder belt out of the retractor while the system is in the automatic locking mode.
J16L_EA.book Page 40 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Child Restraint WARNING Child-Restraint Tether Usage: Using the tether to secure anything but a child-restraint system is dangerous. This could weaken or damage the tether or tether anchor and result in injury. Use the tether and tether anchor only for a childrestraint system. Incorrect Positioning of the Tether Strap: Positioning the tether strap on top of the head restraint is dangerous.
J16L_EA.book Page 41 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Child Restraint WARNING Child-Restraint Tether Usage: Using the tether to secure anything but a child-restraint system is dangerous. This could weaken or damage the tether or tether anchor and result in injury. Use the tether and tether anchor only for a childrestraint system. 2.
J16L_EA.book Page 42 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Child Restraint NOTE NOTE Inspect this function before each use of the child-restraint system. You should not be able to pull the shoulder belt out of the retractor while the system is in the automatic locking mode. When you remove the child-restraint system, be sure the belt fully retracts to return the system to emergency locking mode before occupants use the seat belts.
J16L_EA.book Page 43 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Child Restraint WARNING Children and Seating Position with Side Air Bag: Allowing anyone to lean over or against the front door is dangerous. If the vehicle is equipped with side air bags, the impact of an inflating side air bag could cause serious injury or death to the person.
J16L_EA.book Page 44 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Child Restraint LATCH Child-Restraint Systems Your Mazda is equipped with LATCH lower anchors for attachment of specially designed LATCH child-restraint systems in the second-row seats. Both anchors must be used, otherwise the seat will bounce around and put the child in danger. Some LATCH childrestraint systems must also be used in conjunction with a tether to be effective.
J16L_EA.book Page 45 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Child Restraint ▼ Child-Restraint System Installation Procedure (Second-Row Seats) 1. Slide the second-row seat as far back as possible. 4. Expand the area between the seat bottom and the seatback slightly to verify the locations of the LATCH lower anchors. 2. Raise the reclining lever and lower the seatback forward. For left seat LATCH lower anchor Second-row seat For right seat 5.
J16L_EA.book Page 46 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Child Restraint Tether strap position Tether strap Anchor bracket WARNING Child-Restraint Tether Usage: Using the tether to secure anything but a child-restraint system is dangerous. This could weaken or damage the tether or tether anchor and result in injury. Use the tether and tether anchor only for a childrestraint system.
J16L_EA.book Page 47 Friday, February 22, 2002 11:34 AM Essential Safety Equipment SRS Air Bags Supplemental Restraint Systems (SRS) Precautions Read this owner’s manual carefully to verify what air bags (driver-side air bag, passengerside air bag, side air bags) are equipped in your vehicle. The front and side supplemental restraint systems (SRS) include 4 air bags.
J16L_EA.book Page 48 Friday, February 22, 2002 11:34 AM Essential Safety Equipment SRS Air Bags WARNING Air Bags without Seat Belts: Depending only on the air bags for protection during an accident is dangerous. Alone, air bags may not prevent serious injuries. The appropriate air bags can be expected to inflate only during a frontal, side or near-frontal collision of at least moderate force. Vehicle occupants should always wear seat belts.
J16L_EA.book Page 49 Friday, February 22, 2002 11:34 AM Essential Safety Equipment SRS Air Bags WARNING Seating Position with Side Air Bags: Sitting too close to the side air bag storage compartments or placing hands on them is extremely dangerous. A side air bag inflates with great force and speed directly out of the outboard shoulder of the front seat and expands along the front door on the side the car is hit.
J16L_EA.book Page 50 Friday, February 22, 2002 11:34 AM Essential Safety Equipment SRS Air Bags WARNING Suspension Adjustment: Adjusting the vehicle suspension is dangerous. If the vehicle’s height or the suspension is changed, the vehicle will be unable to accurately detect a collision resulting in incorrect or unexpected air bag deployment and the possibility of serious injuries.
J16L_EA.book Page 51 Friday, February 22, 2002 11:34 AM Essential Safety Equipment SRS Air Bags Air Bag System Description The supplemental restraint systems (SRS) have two basic subsystems: • The air bag system with inflators and air bags. • The electric system with crash sensors and diagnostic module. The air bags are mounted in the following locations: the center of the steering wheel, the passenger-side of the dashboard, and in the outboard sides of the front seatbacks.
J16L_EA.book Page 52 Friday, February 22, 2002 11:34 AM Essential Safety Equipment SRS Air Bags ▼ Air Bag Activation/Deactivation Front air bag activation A greater than moderate impact will cause the front air bags to inflate in the following cases: Hitting a solid wall straight on at greater than about 22 km/h (14 mph). Frontal impact within about a 30 degree range from head-on to the vehicle. Hitting a curb, pavement edge or hard object. Driving into a big hole or hitting the far side of a hole.
J16L_EA.book Page 53 Friday, February 22, 2002 11:34 AM Essential Safety Equipment SRS Air Bags Limitations to front air bag activation Depending on the severity of impact, the front air bags may not inflate in the following cases: Impacts involving trees or poles cause severe cosmetic damage but may not have enough impact to activate the air bag. Rear-ending or running under a truck's tail gate may not provide the stopping force necessary for air bag deployment.
J16L_EA.book Page 54 Friday, February 22, 2002 11:34 AM Essential Safety Equipment SRS Air Bags Non-activation of front air bags Front air bags will not normally inflate in the following cases: Collision from the rear. Vehicle roll-over, may deploy the side air bag(s) but not the front air bags. Impact to the side, but it may deploy a side air bag.
J16L_EA.book Page 55 Friday, February 22, 2002 11:34 AM Essential Safety Equipment SRS Air Bags Limitations to side air bag activation Depending on the severity of impact, a side air bag may not inflate in the following cases: Frontal offset impact may not provide enough side impact to deploy a side air bag. Vehicle roll-over may not provide enough side force to deploy the side air bags.
J16L_EA.book Page 56 Friday, February 22, 2002 11:34 AM Essential Safety Equipment SRS Air Bags ▼ Constant Monitoring The following components of the air bag systems are monitored by a diagnostic system: • SAS unit • Air bag modules • Side air bag crash sensor • Front seat belt pretensioners • Related wiring A diagnostic module continuously monitors the systems’ readiness. This begins when the ignition switch is turned to the ON position and continues while the vehicle is being driven.
J16L_EA.book Page 57 Friday, February 22, 2002 11:34 AM Essential Safety Equipment SRS Air Bags WARNING Damaged Air Bag Sensors: Driving with damaged air bag sensors is dangerous. A collision, even one not strong enough to inflate the air bags, could damage the sensors. If there was a subsequent collision, a damaged sensor would not inflate the air bags. Always have an Authorized Mazda Dealer inspect the air bag systems after a collision.
J16L_EA.book Page 58 Friday, February 22, 2002 11:34 AM 2-58 Form No.
J16L_EA.book Page 1 Friday, February 22, 2002 11:34 AM 3 Knowing Your Mazda Explanation of basic operations and controls; opening/closing and adjustment of various parts. Doors and Locks .......................................................................... 3- 2 Keys ......................................................................................... 3- 2 Keyless Entry System .............................................................. 3- 3 Door Locks ..........................................
J16L_EA.book Page 2 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Doors and Locks Keys The keys operate all locks. Without immobilizer system WARNING Keys and Children: Leaving children in a vehicle with the ignition key is dangerous. This could result in someone being badly injured or even killed. They could play with power windows or other controls, or even make the vehicle move. Don’t leave the keys in your vehicle with children.
J16L_EA.book Page 3 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Doors and Locks Keyless Entry System This system locks and unlocks the doors and the liftgate. It can also help you signal for attention in an emergency. Opening and closing of the power sliding doors with the keyless entry system transmitter is also possible on power sliding door-equipped vehicles. Press the button slowly and accurately. CAUTION To avoid damage to the transmitter, do not: • Drop it. • Get it wet. • Disassemble it.
J16L_EA.book Page 4 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Doors and Locks ▼ Transmitter Lock button With power sliding doors Lock button Unlock button Right sliding door button Left sliding door button Panic button Without power sliding doors Lock button To lock the doors and the liftgate, press the LOCK button and the hazard warning lights will flash once. To confirm that all the doors and the liftgate have been locked, press the LOCK button again within 5 seconds.
J16L_EA.book Page 5 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Doors and Locks WARNING Operating Power Sliding Doors with Transmitter: Opening or closing the power sliding doors with the keyless entry system transmitter while not watching the doors move is dangerous. People or animals could be injured when the doors open along the rear sides and back to the rear fender, or in closing. Allowing children to use the transmitter could result in serious injuries despite the jam-safe feature.
J16L_EA.book Page 6 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Doors and Locks ▼ Transmitter Maintenance CAUTION • Make sure the battery is installed with the correct pole facing upward. Battery leakage could occur if it is not installed correctly. Replacing the transmitter battery 1. Insert a small screwdriver into the slot and gently pry open the transmitter. Slot • When replacing the battery, be careful not to bend the electrical terminals or get oil on them.
J16L_EA.book Page 7 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Doors and Locks 3. Put in the new battery (CR2025 or the equivalent) with the positive pole ( ) facing down. ▼ Service If you have a problem with the keyless entry system, consult an Authorized Mazda Dealer. If your transmitter is lost or stolen, bring all remaining transmitters to an Authorized Mazda Dealer as soon as possible for a replacement and to make the lost or stolen transmitter inoperative.
J16L_EA.book Page 8 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Doors and Locks Door Locks WARNING Unattended Children and Pets: Leaving a child or an animal unattended in a parked vehicle is dangerous. In hot weather, temperatures inside a vehicle can become high enough to cause brain damage or even death. Always take all children and animals with you or leave a responsible person with them. ▼ Locking, Unlocking with Key Either front door can be locked or unlocked with a key.
J16L_EA.book Page 9 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Doors and Locks To lock either front door with the doorlock button from the outside, push its door-lock button and close the door. To lock a sliding door with the door-lock button from the outside, push down its door-lock button and close the door. NOTE NOTE When locking the doors this way, be careful not to leave the key inside the vehicle. The left-side sliding door cannot be opened when the fuel-filler lid is open.
J16L_EA.book Page 10 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Doors and Locks ▼ Power Door Locks Locking, unlocking with key All doors and the liftgate lock automatically when any door is locked with a key. All doors and the liftgate unlock when the driver’s door is unlocked and the key is held in the unlock position a second longer. Also, all doors and the liftgate unlock when the passenger’s door is unlocked.
J16L_EA.book Page 11 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Doors and Locks To close, pull the inner door handle or outer door handle. NOTE If your Mazda has power sliding doors, press the power sliding doors main switch to the OFF position. Refer to Power Sliding Doors (page 3-12) (Without power sliding doors) When closing a door from the outside, hold the door handle pulled while sliding the door.
J16L_EA.book Page 12 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Doors and Locks ▼ Easy Closure (With Power Sliding Doors) The Easy Closure system automatically closes the doors completely from the near-shut position. This system also operates when the doors are closed manually.
J16L_EA.book Page 13 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Doors and Locks WARNING Operating Power Sliding Doors: Opening or closing the power sliding doors while not watching the doors move is dangerous. People or animals could be injured when the doors open along the rear sides and back to the rear fender, or in closing.
J16L_EA.book Page 14 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Doors and Locks WARNING Open Windows and Power Sliding Doors: It is dangerous to stick your head or hands out the power sliding door windows while the doors are opening/ closing. A head or hands could be caught resulting in serious injury. Never stick your head or hands out the power sliding door windows.
J16L_EA.book Page 15 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Doors and Locks Opening/Closing with Switches 1. Bring the vehicle to a complete stop. 2. Put the shift lever in park (P). 3. Set the parking brake. 4. Unlock the sliding doors. 5. Press the power sliding doors main switch to the ON position. If you attempt to operate the vehicle in any way other than the above conditions while the power sliding doors are opening/closing electrically, the buzzer will sound continuously.
J16L_EA.book Page 16 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Doors and Locks Left power sliding door switch When the doors are completely open and a door is slid by the handle 5 cm (2 in) in the direction of closing, the doors will completely close automatically after the buzzer sounds. Jam-safe equipment While a door is opening/closing electrically and the system detects a person or an object in the sliding door’s path, the door will slide in the reverse direction automatically.
J16L_EA.book Page 17 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Doors and Locks NOTE WARNING If the power sliding door system repeatedly detects an obstruction in the open/close directions for a number of times, the door will be stopped. Power sliding doors main switch When the power sliding doors main switch is pressed to the OFF position, electrical open/close operation is not possible. The power sliding doors can be opened/closed manually.
J16L_EA.book Page 18 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Doors and Locks Liftgate NOTE • If there is a problem with the power sliding doors and you want to operate them manually, press the power sliding doors main switch to the OFF position and they can be operated manually. • If the power sliding doors main switch is pressed to the OFF position while the doors are opening/closing electrically, the sliding door(s) can be stopped.
J16L_EA.book Page 19 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Doors and Locks ▼ Remote Liftgate Lock If your Mazda has a power door-lock system (page 3-10), the liftgate can be locked/ unlocked by one of the following methods: • Use a key in the driver’s door. • Use a key in the front passenger door. • Press the LOCK or UNLOCK button on the transmitter. • Pushing the area on the door-lock switch marked "DOOR LOCK" or the unmarked part.
J16L_EA.book Page 20 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Doors and Locks ▼ Operating the Driver’s Side Power Window ▼ Operating the Passenger Power Windows To open the window, push down the switch. To close the window, pull up the switch. The power windows may be operated when the power window lock switch is in the unlock position. Close Left front window Open The passenger windows may be opened or closed by the power window master control switches on the driver’s door.
J16L_EA.book Page 21 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Doors and Locks Rear power windows To open a window, push the lower part of the switch. To close, push the upper part of the switch. WARNING Unintentional Window Operation: Unintentional window operation is dangerous. A person’s hands, head, or neck could be caught by the window and result in serious injury. Unless a passenger needs to operate a window, keep the power window lock switch in the locked position.
J16L_EA.book Page 22 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Doors and Locks Rear Quarter Windows Open or close a swing-out rear quarter window by releasing the latch and moving the window. ▼ Opening a Window Pull the latch inward and then push the window outward. ▼ Closing a Window Pull the latch inward and then push it backward until it snaps shut. Make sure the window is securely closed. 3-22 Form No. 8Q44-EA-01K Fuel-Filler Lid and Cap WARNING Fuel Spray: Fuel spray is dangerous.
J16L_EA.book Page 23 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Doors and Locks ▼ Fuel-Filler Lid To open, pull up the remote fuel-filler lid release. Remote fuel-filler lid release CAUTION Make sure the fuel-filler cap is tightened securely. The check engine light comes on when the cap isn’t tightened securely. If the light remains on (even after you have tightened the cap securely, driven, and restarted the engine several times), it may indicate a different problem.
J16L_EA.book Page 24 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Doors and Locks Hood 3. Use the support rod to hold the hood open. ▼ Opening the Hood 1. With the vehicle parked, pull the release handle to unlock the hood. Support rod Clip ▼ Closing the Hood 2. Pull the safety catch up and lift the hood. 1. Check under the hood area to make certain all filler caps are in place and all loose items (e.g. tools, oil containers, etc.) have been removed. 2. Secure the rod in its clip. 3.
J16L_EA.book Page 25 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Doors and Locks Sunroof The sunroof can be opened or closed electrically only when the ignition switch is in the ON position. NOTE After washing your Mazda or after a rain, wipe the water off the sunroof before operating it. ▼ Tilt Operation Slide switch The rear of the sunroof can be tilted open to provide more ventilation. To tilt, push the rear of the tilt switch located on the left side of the overhead console.
J16L_EA.book Page 26 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Doors and Locks ▼ Slide Operation ▼ Sunshade To open to any position, press the rear of the slide switch located on the right side of the overhead console. The sunshade can be opened and closed by hand. To close, press the front of the slide switch. The sunshade opens automatically when the sunroof is opened, but must be closed by hand.
J16L_EA.book Page 27 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Security System Immobilizer System The optional immobilizer system allows the engine to start only with a key the system recognizes. If someone attempts to start the engine with an unrecognized key, the engine will not start, thereby helping to prevent the theft of your vehicle. If the immobilizer system is working properly, the light will come on when the ignition switch is turned to the ON or START position.
J16L_EA.book Page 28 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Security System ▼ Maintenance If you have a problem with the immobilizer system or the key, consult an Authorized Mazda Dealer. CAUTION • To avoid damage to the key, do not: • Drop the key. • Get the key wet. • Expose the key to any kind of magnetic field. • Expose the key to high temperatures on places such as the dashboard or hood, under direct sunlight.
J16L_EA.book Page 29 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Security System Theft-Deterrent System ▼ How to Arm the System 1. Remove the ignition key. The optional theft-deterrent system is designed to prevent your vehicle or its contents from being stolen when all the doors, hood, and liftgate are locked. If forcible entry is attempted, the system sounds the horn and flashes the hazard warning lights.
J16L_EA.book Page 30 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Security System ▼ To Turn off an Armed System ▼ Theft-Deterrent Labels An armed system can be turned off by any one of the following methods: • Unlock a door or the liftgate with the key. • Press the UNLOCK button on the keyless entry system transmitter. • Insert the key into the ignition and turn in to the ON position. The hazard warning lights will flash twice to indicate that the system is turned off.
J16L_EA.book Page 31 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Steering Wheel and Mirrors Steering Wheel WARNING Adjusting the Steering Wheel: Adjusting the steering wheel while the vehicle is moving is dangerous. Moving it can very easily cause the driver to abruptly turn to the left or right. This can lead to loss of control or an accident. Never adjust the steering wheel while the vehicle is moving.
J16L_EA.book Page 32 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Steering Wheel and Mirrors 2. Depress the perimeter switch in the appropriate direction. Selector switch Perimeter switch WARNING Driving with Mirrors Folded In: Driving with the outside mirrors folded in is dangerous. Your rear view will be restricted, and you could have an accident. Always return the outside mirrors to the driving position before you start driving.
J16L_EA.book Page 33 Friday, February 22, 2002 11:34 AM Knowing Your Mazda Steering Wheel and Mirrors WARNING Blocked View: Cargo stacked higher than the seatbacks is dangerous. It can block your view in the rearview mirror, which might cause you to hit another car when changing lanes. Don’t stack things higher than the seatbacks. 3-33 Form No.
J16L_EA.book Page 34 Friday, February 22, 2002 11:34 AM 3-34 Form No.
J16L_EA.book Page 1 Friday, February 22, 2002 11:34 AM 4 Before Driving Your Mazda Important information about driving your Mazda. Fuel and Engine Exhaust Precautions ....................................... 4Fuel Requirements ................................................................... 4Emission Control System ........................................................ 4Engine Exhaust (Carbon Monoxide) ....................................... 4- 2 2 3 5 Before Starting the Engine ...................
J16L_EA.book Page 2 Friday, February 22, 2002 11:34 AM Before Driving Your Mazda Fuel and Engine Exhaust Precautions Fuel Requirements Vehicles with catalytic converters must use ONLY UNLEADED FUEL, which will reduce exhaust emissions and keep spark plug fouling to a minimum. Fuel with a lower rating could cause the emission control system to lose effectiveness. It could also cause engine knocking and serious engine damage. Your Mazda will perform best with fuel listed in the table.
J16L_EA.book Page 3 Friday, February 22, 2002 11:34 AM Before Driving Your Mazda Fuel and Engine Exhaust Precautions Emission Control System Your vehicle is equipped with an emission control system (the catalytic converter is part of this system) that enables your vehicle to comply with existing exhaust emissions requirements. WARNING Parking Over Things That Burn: Parking over or near anything inflammable, such as dry grass, is dangerous.
J16L_EA.book Page 4 Friday, February 22, 2002 11:34 AM Before Driving Your Mazda Fuel and Engine Exhaust Precautions NOTE After driving some distance and turning off the engine, the sound of a valve opening and closing can be heard near the lower left part of the driver's seat or below the driver-side door from the outside, however this does not indicate an abnormality. Your vehicle has a self-checking device and it operates after turning off the engine. 4-4 Form No.
J16L_EA.book Page 5 Friday, February 22, 2002 11:34 AM Before Driving Your Mazda Fuel and Engine Exhaust Precautions Engine Exhaust (Carbon Monoxide) WARNING Carbon Monoxide: Engine exhaust is dangerous. This gas contains carbon monoxide (CO), which is colorless, odorless, and poisonous. When inhaled, it can cause loss of consciousness and death. If you smell exhaust gas inside your vehicle, keep all windows fully open and contact an Authorized Mazda Dealer immediately.
J16L_EA.book Page 6 Friday, February 22, 2002 11:34 AM Before Driving Your Mazda Before Starting the Engine Before Getting In • Be sure the windows, outside mirror(s), and outside lights are clean. • Inspect inflation pressures and condition of tires. • Look under the vehicle for any sign of a leak. • If you plan to back up, make sure nothing will be in your way.
J16L_EA.book Page 7 Friday, February 22, 2002 11:34 AM Before Driving Your Mazda Driving Tips Break-In Period Money-Saving Suggestions No special break-in is necessary, but a few precautions in the first 1,000 km (600 miles) may add to the performance, economy, and life of your Mazda. How you operate your Mazda determines how far it will travel on a tank of fuel. Use these suggestions to help save money on fuel and repairs. • Don’t race the engine. • Avoid long warm-ups.
J16L_EA.book Page 8 Friday, February 22, 2002 11:34 AM Before Driving Your Mazda Driving Tips Hazardous Driving WARNING Downshifting on Slippery Surfaces: Downshifting into lower gear while driving on slippery surfaces is dangerous. The sudden change in tire speed could cause the tires to skid. This could lead to loss of vehicle control and an accident. If it is necessary to downshift on slippery surfaces, be very careful.
J16L_EA.book Page 9 Friday, February 22, 2002 11:34 AM Before Driving Your Mazda Driving Tips Winter Driving • Carry emergency gear, including tire chains, window scraper, flares, a small shovel, jumper cables, and a small bag of sand or salt. Ask a Mazda dealer to perform the following precautions: • Have the proper ratio of antifreeze in the radiator. • Inspect the battery and its cables. Cold reduces battery capacity. • Use only cold-weather engine oil (page 8-9).
J16L_EA.book Page 10 Friday, February 22, 2002 11:34 AM Before Driving Your Mazda Driving Tips ▼ Tire Chains CAUTION • Chains may scratch or chip aluminum wheels. Install tire chains on steel wheels only. • Chains may affect handling. • Don’t go faster than 50 km/h (30 mph) or the chain manufacturer’s recommended limit, whichever is lower. • Drive carefully and avoid bumps, holes, and sharp turns. • Avoid locked-wheel braking.
J16L_EA.book Page 11 Friday, February 22, 2002 11:34 AM Before Driving Your Mazda Driving Tips Overloading WARNING Vehicle Load Weight: The gross axle weight rating (GAWR) and the gross vehicle weight rating (GVWR) of your vehicle are on the Motor Vehicle Safety Standard Label on the driver’s door frame. Exceeding these ratings can cause an accident or vehicle damage. You can estimate the weight of your load by weighing the items (or people) before putting them in the vehicle.
J16L_EA.book Page 12 Friday, February 22, 2002 11:34 AM Before Driving Your Mazda Towing Trailer Towing Your Mazda was designed and built primarily to carry passengers and cargo. If you must tow a trailer, follow these instructions because driver and passenger safety depends on proper equipment and safe driving habits. Towing a trailer will affect handling, braking, durability, performance, and economy. Never overload vehicle or trailer. Consult an Authorized Mazda Dealer if you need further details.
J16L_EA.book Page 13 Friday, February 22, 2002 11:34 AM Before Driving Your Mazda Towing TRAILER TOWING-LOAD TABLE Because vehicle weights vary, adjustments must be made to meet the requirements in this table. kg (lb) Model Item MAX. FRONTAL AREA MAX. TTW With 4-Seasons Package Without 4-Seasons Package 2.97m2(32 ft2) Add trailer’s weight, load and hitch; vehicle passengers and vehicle load* * i.e. baggage, food, camp gear MAX.
J16L_EA.book Page 14 Friday, February 22, 2002 11:34 AM Before Driving Your Mazda Towing WARNING Tow Loads: Attempting to tow loads greater than those specified is dangerous as it may cause serious handling and performance problems that could result in personal injury or vehicle damage, or both. Always keep tow loads within specified limits in the Trailer Towing-Load Table. Trailer Loading: Loading the trailer with more weight in the rear than in the front is dangerous.
J16L_EA.book Page 15 Friday, February 22, 2002 11:34 AM Before Driving Your Mazda Towing WARNING Unsecured Hitch: An unsecured trailer hitch is dangerous as it causes greater trailer sway from crosswinds, rough roads or other causes, resulting in loss of control and a serious accident. Examine all trailer-hitch mounting bolts regularly and tighten any that are loose.
J16L_EA.book Page 16 Friday, February 22, 2002 11:34 AM Before Driving Your Mazda Towing ▼ Safety Chains Safety chains must be used as a precautionary measure should the trailer become unintentionally unhitched. They should cross under the trailer tongue and attach to the hitch. Leave enough slack to allow full turns. Consult literature published by your trailer or hitch manufacturer for more details.
J16L_EA.book Page 17 Friday, February 22, 2002 11:34 AM Before Driving Your Mazda Towing ▼ Trailer Towing Tips • Verify that your Mazda maintains a near-normal attitude when a loaded or unloaded trailer is connected. Don’t drive if it has an abnormal front-up or front-down position. Inspect for incorrect tongue load, worn suspension parts, and trailer overloading. • Make sure the trailer is properly loaded and the cargo is secure to prevent it from shifting.
J16L_EA.book Page 18 Friday, February 22, 2002 11:34 AM Before Driving Your Mazda Towing Passing Plan well ahead to pass other vehicles, and provide plenty of room before changing lanes. Crosswinds from passing vehicles, especially larger ones, and the effects of rough roads will affect handling. If swaying occurs, firmly grip the steering wheel and reduce speed immediately, but gradually. Steer straight ahead.
J16L_EA.book Page 19 Friday, February 22, 2002 11:34 AM Before Driving Your Mazda Towing Parking Always make sure the tires of the trailer and the tow vehicle are blocked while parked. Apply the parking brake firmly and put the transaxle in P. Avoid parking on an incline, but if you must, follow these instructions: 1. Depress and hold down the brake pedal. 2. Have a helper put wheel blocks against the downhill side of all vehicle and trailer tires. 3.
J16L_EA.book Page 20 Friday, February 22, 2002 11:34 AM 4-20 Form No.
J16L_EA.book Page 1 Friday, February 22, 2002 11:34 AM 5 Driving Your Mazda Explanation of instruments and controls. Starting and Driving ................................................................... 5- 2 Ignition Switch ........................................................................ 5- 2 Starting the Engine .................................................................. 5- 3 Brake System ...........................................................................
J16L_EA.book Page 2 Friday, February 22, 2002 11:34 AM Driving Your Mazda Starting and Driving Ignition Switch ▼ Ignition Switch Positions NOTE If turning the key is difficult, jiggle the steering wheel from side to side. ACC (Accessory) The steering wheel unlocks and some electrical accessories will operate. ON This is the normal running position after the engine is started. The warning lights (except brakes) should be inspected before the engine is started (page 5-23).
J16L_EA.book Page 3 Friday, February 22, 2002 11:34 AM Driving Your Mazda Starting and Driving Starting the Engine NOTE Engine-starting is controlled by the spark ignition system. This system meets all Canadian Interference-Causing Equipment Standard requirements regulating the impulse electrical field strength of radio noise. NOTE • In extremely cold weather, below -18°C (0°F), or after the vehicle has stood idle several days, let the engine warm up without operating the accelerator.
J16L_EA.book Page 4 Friday, February 22, 2002 11:34 AM Driving Your Mazda Starting and Driving Brake System ▼ Foot Brake Your Mazda has power-assisted brakes that adjust automatically through normal use. Should power-assist fail, you can stop by applying greater force than normal to the brake pedal. But the distance required to stop will be greater than usual. WARNING Driving with the Engine Off: Continuing to drive when the engine is stalled or turned off is dangerous.
J16L_EA.book Page 5 Friday, February 22, 2002 11:34 AM Driving Your Mazda Starting and Driving ▼ Parking Brake ▼ Brake System Warning Light CAUTION Driving with the parking brake on will cause excessive wear of the brake linings or pads. Setting the parking brake Depress the brake pedal, then pull the brake handle fully upward. This warning has the following functions: Parking brake warning The light comes on when the parking brake is applied with the ignition switch in the START or ON position.
J16L_EA.book Page 6 Friday, February 22, 2002 11:34 AM Driving Your Mazda Starting and Driving If the warning light remains on, or if the brakes do not operate properly, do not drive the vehicle. Have it towed to an Authorized Mazda Dealer. Even if the light goes off, have your brake system inspected as soon as possible.
J16L_EA.book Page 7 Friday, February 22, 2002 11:34 AM Driving Your Mazda Starting and Driving ▼ Anti-Lock Brake System (ABS) ▼ ABS Warning Light The ABS control unit continuously monitors the speed of each wheel. If one is about to lock up, the ABS responds by automatically releasing and reapplying that wheel’s brake. The driver will feel a slight vibration in the brake pedal and may hear a chattering noise from the brake system. This is normal when the ABS operates.
J16L_EA.book Page 8 Friday, February 22, 2002 11:34 AM Driving Your Mazda Starting and Driving NOTE When the engine is jump-started to charge the battery, uneven rpm occurs and the ABS warning light comes on. This is due to a weak battery, not a malfunction. Recharge the battery.
J16L_EA.book Page 9 Friday, February 22, 2002 11:34 AM Driving Your Mazda Starting and Driving ▼ Transaxle Ranges R (Reverse) The shift lever must be in P or N to operate the starter. In position R, the vehicle moves only backward. You must be at a complete stop before shifting to or from R, except as explained under Rocking the Vehicle (page 4-8).
J16L_EA.book Page 10 Friday, February 22, 2002 11:34 AM Driving Your Mazda Starting and Driving 3 (Third) 3. Move the shift lever. The 3 position is helpful when driving in heavy, slow-moving traffic and climbing hills, for engine braking assist when going down hills, or for starting on slick surfaces and other situations where gentle acceleration may be necessary. Do not exceed 141 km/h (87 mph) in the 3 position.
J16L_EA.book Page 11 Friday, February 22, 2002 11:34 AM Driving Your Mazda Starting and Driving ▼ Overdrive O/D OFF indicator light Overdrive operation In D, the transaxle automatically shifts to overdrive, which improves fuel economy and reduces noise. To allow engine braking when going down a steep grade, make sure the overdrive button is in the off position. This light comes on when the overdrive has been turned off.
J16L_EA.book Page 12 Friday, February 22, 2002 11:34 AM Driving Your Mazda Starting and Driving Descending steep grades When descending a steep grade, shift to 3 or 2, depending on load weight and grade steepness. Descend slowly, using the brakes only occasionally to prevent them from overheating. Power Steering Power steering is only operable when the engine is running. If the engine is off or if the power steering system is inoperable, you can still steer, but it requires more physical effort.
J16L_EA.book Page 13 Friday, February 22, 2002 11:34 AM Driving Your Mazda Starting and Driving Cruise Control With cruise control, you can set and automatically maintain any speed of more than about 40 km/h (25 mph). ▼ Activation/Deactivation To activate the system, push the CRUISE MAIN switch. To deactivate the system, push the switch again.
J16L_EA.book Page 14 Friday, February 22, 2002 11:34 AM Driving Your Mazda Starting and Driving ▼ To Set Speed ▼ To Increase Cruising Speed 1. Turn on the CRUISE MAIN switch. Follow either of these procedures. 2. Accelerate to the desired speed, which must be more than 40 km/h (25 mph). • Press the lever up to RES/ACC and hold it. Your vehicle will accelerate. Release the lever at the speed you want. 3. Press the lever down to SET/COAST and release it at the speed you want.
J16L_EA.book Page 15 Friday, February 22, 2002 11:34 AM Driving Your Mazda Starting and Driving NOTE Accelerate if you want to speed up temporarily when the cruise control is on. Greater speed will not interfere with it or change the set speed. Take your foot off the accelerator to return to the set speed. ▼ To Decrease Cruising Speed Press the lever down to SET/COAST and hold it. The vehicle will gradually slow. Release the lever at the speed you want.
J16L_EA.book Page 16 Friday, February 22, 2002 11:34 AM Driving Your Mazda Starting and Driving ▼ To Cancel To turn off the system, use one of these methods: • Press the CRUISE MAIN switch. • Slightly depress the brake pedal. • Pull the lever toward you. Traction Control System (TCS) The Traction Control System (TCS) enhances traction and safety by regulating engine torque. When the TCS detects driving wheel slippage, it lowers engine torque to prevent loss of traction.
J16L_EA.book Page 17 Friday, February 22, 2002 11:34 AM Driving Your Mazda Starting and Driving ▼ TCS Warning Light ▼ TCS OFF Indicator Light This warning light stays on for a few seconds when the ignition switch is turned to the ON position. It flashes when the system regulates engine torque. This light comes on when the ignition switch is turned to the ON position. It goes off when the engine is started.
J16L_EA.book Page 18 Friday, February 22, 2002 11:34 AM Driving Your Mazda Starting and Driving NOTE • When TCS is on and you attempt to free the vehicle when it is stuck, or drive it out of freshly fallen snow, the TCS will activate. Depressing the accelerator will not increase engine power and freeing the vehicle may be difficult. When this happen, turn off the TCS. • If the TCS is off when the engine is turned off, it automatically activates when the ignition switch is turned on.
J16L_EA.book Page 19 Friday, February 22, 2002 11:34 AM Driving Your Mazda Instrument Cluster and Indicators Meters and Gauges 1 2 3 4 5 Speedometer ..............................................................................................................5-20 Odometer and Trip Meter ..........................................................................................5-20 Tachometer ................................................................................................................
J16L_EA.book Page 20 Friday, February 22, 2002 11:34 AM Driving Your Mazda Instrument Cluster and Indicators ▼ Speedometer NOTE The speedometer indicates the speed of the vehicle. ▼ Odometer and Trip Meter The ignition switch must be in the ACC or ON position. The display mode can be changed from odometer to trip meter A to trip meter B and then back to odometer by pressing the selector. The selected mode will be displayed.
J16L_EA.book Page 21 Friday, February 22, 2002 11:34 AM Driving Your Mazda Instrument Cluster and Indicators The trip meter records the total distance the vehicle is driven until the meter is again reset. Return it to "0.0" by holding the selector depressed for more than 1 second. Use this meter to measure trip distances and in to compute fuel consumption. ▼ Engine Coolant Temperature Gauge The engine coolant temperature gauge shows the temperature of the engine coolant.
J16L_EA.book Page 22 Friday, February 22, 2002 11:34 AM Driving Your Mazda Instrument Cluster and Indicators ▼ Fuel Gauge The fuel gauge shows approximately how much fuel is in the tank. We recommend keeping the tank over 1/4 full. When the low fuel warning light illuminates or when the needle is near E, refuel as soon as possible. Low fuel warning light ▼ Dashboard Illumination When the headlight switch is in the or position, rotate the thumb-wheel to adjust the brightness of the dashboard lights.
J16L_EA.
J16L_EA.book Page 24 Friday, February 22, 2002 11:34 AM Driving Your Mazda Warning/Indicator Lights and Beeps Signal Warning/Indicator Lights Page Seat Belt Warning Light 5-28 Door-Ajar Warning Light 5-29 TCS Warning Light 5-29 Immobilizer System Warning/Security Indicator Light 5-29 Headlight High-Beam Indicator Light 5-30 O/D OFF Indicator Light 5-30 TCS OFF Indicator Light 5-30 Cruise Set Indicator Light 5-30 5-24 Form No.
J16L_EA.book Page 25 Friday, February 22, 2002 11:34 AM Driving Your Mazda Warning/Indicator Lights and Beeps ▼ Brake System Warning Light If the warning light remains on, or if the brakes do not operate properly, do not drive the vehicle. Have it towed to an Authorized Mazda Dealer. Even if the light goes off, have your brake system inspected as soon as possible.
J16L_EA.book Page 26 Friday, February 22, 2002 11:34 AM Driving Your Mazda Warning/Indicator Lights and Beeps WARNING Brake Warning Light: Driving with the brake system warning light on is dangerous. It indicates that your brakes may not work at all or that they could completely fail at any time. If this light remains on, have the brakes inspected immediately. Don’t drive with this light on, and contact an Authorized Mazda Dealer to have the brakes inspected as soon as possible.
J16L_EA.book Page 27 Friday, February 22, 2002 11:34 AM Driving Your Mazda Warning/Indicator Lights and Beeps 2. Turn off the engine and inspect the engine oil level (page 8-9). If it’s low, add oil. 3. Check the light. If the check engine light flashes continuously, decrease your speed and consult an Authorized Mazda Dealer as soon as possible. ▼ ABS Warning Light If the light remains on even after you add oil, have your vehicle towed to the nearest service station or to an Authorized Mazda Dealer.
J16L_EA.book Page 28 Friday, February 22, 2002 11:34 AM Driving Your Mazda Warning/Indicator Lights and Beeps NOTE When the engine is jump-started to charge the battery, uneven rpm occurs and the ABS warning light comes on. This is due to a weak battery, not a malfunction. Recharge the battery. ▼ Air Bag/Front Seat Belt Pretensioner System Warning Light WARNING Self-Servicing the Air Bag/ Pretensioner Systems: Self-servicing or tampering with the systems is dangerous.
J16L_EA.book Page 29 Friday, February 22, 2002 11:34 AM Driving Your Mazda Warning/Indicator Lights and Beeps ▼ Door-Ajar Warning Light This warning light comes on when any door or liftgate isn’t securely closed. ▼ TCS Warning Light This warning light stays on for a few seconds when the ignition switch is turned to the ON position. It flashes when the system regulates engine torque. If the light stays on, the traction control system may have a malfunction and it may not operate correctly.
J16L_EA.book Page 30 Friday, February 22, 2002 11:34 AM Driving Your Mazda Warning/Indicator Lights and Beeps ▼ Headlight High-Beam Indicator Light This light indicates one of two things: • The high-beam headlights are on. • The turn signal lever is in the flash-topass position. ▼ O/D OFF Indicator Light ▼ TCS OFF Indicator Light This light comes on when the ignition switch is turned to the ON position. It goes off when the engine is started.
J16L_EA.book Page 31 Friday, February 22, 2002 11:34 AM Driving Your Mazda Warning/Indicator Lights and Beeps Beeps ▼ Seat Belt Warning Beep If the driver’s seat belt is not fastened when the ignition switch is turned to the ON position, a beep will sound for about 6 seconds. ▼ Ignition Key Reminder If the ignition switch is in the LOCK or ACC position, a beep will sound when the driver’s door is opened.
J16L_EA.book Page 32 Friday, February 22, 2002 11:34 AM Driving Your Mazda Switches and Controls ▼ Headlight High-Low Beam Lighting Control Push the lever forward for high beams. Pull it back for low. High beams Low beams ▼ Headlights To turn on the lights, turn the knob on the end of the control lever.
J16L_EA.book Page 33 Friday, February 22, 2002 11:34 AM Driving Your Mazda Switches and Controls ▼ Daytime Running Lights (Canada Model) In Canada, vehicles must be driven with the headlights on during daytime operation. For that reason, the daytime running lights automatically turn on when the ignition switch is turned to the ON position. NOTE The running lights go off when the parking brake is applied.
J16L_EA.book Page 34 Friday, February 22, 2002 11:34 AM Driving Your Mazda Switches and Controls Fog Lights Use this switch to turn on the fog lights. They help you to see as well as to be seen. Windshield Wipers and Washer The ignition switch must be in the ON position. WARNING To turn on the fog lights, first turn on the headlight switch. Then press the fog light switch. To turn the fog lights off, press the fog light switch again or turn the headlight switch off. 5-34 Form No.
J16L_EA.book Page 35 Friday, February 22, 2002 11:34 AM Driving Your Mazda Switches and Controls ▼ Windshield Wipers One-touch wipers For a single wiping cycle, push the lever up to MIST. OFF INT MIST 1 OFF 2 Turn the wipers on by pulling the lever down. INT — Intermittent 1 — Normal 2 — Fast Variable-speed intermittent wipers ▼ Windshield Washer Pull the lever toward you and hold it to spray washer fluid. Set the lever to INT and choose the interval timing by rotating the ring.
J16L_EA.book Page 36 Friday, February 22, 2002 11:34 AM Driving Your Mazda Switches and Controls Rear Window Wiper and Washer The ignition switch must be in the ON position. ▼ Rear Window Wiper Washer ON INT OFF Washer Rear Window Defroster The rear defroster clears frost, fog, and thin ice from the rear window. The ignition switch must be in the ON position. Push the switch to turn on the rear window defroster; the indicator light will come on. Push the switch again to turn it off.
J16L_EA.book Page 37 Friday, February 22, 2002 11:34 AM Driving Your Mazda Switches and Controls Horn To sound the horn, press around the mark of the steering wheel. Hazard Warning Flasher The hazard warning lights should always be used when you stop on or near a roadway. The hazard warning lights warn other drivers that your vehicle is a traffic hazard and that they must take extreme caution when near it. Depress the hazard warning switch and all four turn signals will flash at once.
J16L_EA.book Page 38 Friday, February 22, 2002 11:34 AM 5-38 Form No.
J16L_EA.book Page 1 Friday, February 22, 2002 11:34 AM 6 Interior Comfort Use of various features for drive comfort, including climate control and audio system. Climate Control System .............................................................. 6- 2 Operating Tips ......................................................................... 6- 2 Vent Operation (Front) ............................................................ 6- 3 Control Panel (Front) ....................................................
J16L_EA.book Page 2 Friday, February 22, 2002 11:34 AM Interior Comfort Climate Control System Operating Tips ▼ Operating the Climate Control System Operate the climate control system with the engine running. ▼ Clearing the Air Inlet Clear all obstructions like leaves, snow and ice from the hood and the air inlet in the cowling grille to improve the system efficiency. ▼ Foggy Windows The windows may fog up easily in humid weather. Use the climate control system to defog the windows.
J16L_EA.book Page 3 Friday, February 22, 2002 11:34 AM Interior Comfort Climate Control System Vent Operation (Front) Knob Close Open ▼ Adjusting the Vents Directing airflow You can direct air flow by moving the adjustment knob. Horizontal air flow can be adjusted by pressing the vent left or right. Adjusting the amount of airflow These vents can be opened by rotating the horizontal wheel to the right or closed by rotating them to the left.
J16L_EA.book Page 4 Friday, February 22, 2002 11:34 AM Interior Comfort Climate Control System ▼ Selecting the Airflow Mode Dashboard Vents Defroster and Floor Vents Dashboard and Floor Vents Defroster Vents Floor Vents 6-4 Form No.
J16L_EA.book Page 5 Friday, February 22, 2002 11:34 AM Interior Comfort Climate Control System Control Panel (Front) Fan control dial A/C switch Rear window defroster switch (page 5-36) Temperature control dial 1 A/C 2 3 4 0 Air intake selector switch 0 REAR 1 2 3 Mode selector dial Rear air-conditioner main switch ▼ Control Switches Fan control dial Temperature control dial Cold Hot This dial controls temperature. Turn it clockwise for hot and counterclockwise for cold.
J16L_EA.book Page 6 Friday, February 22, 2002 11:34 AM Interior Comfort Climate Control System Mode selector dial Air intake selector Turn the mode selector dial to select airflow mode (page 6-4). This switch controls the source of air entering the vehicle. A/C switch Press the switch to alternate between the and positions. The indicator light for the selected mode will illuminate. It is recommended that under normal conditions the switch be kept in the outside air position.
J16L_EA.book Page 7 Friday, February 22, 2002 11:34 AM Interior Comfort Climate Control System Recirculated air position ( ) Outside air is shut off. Air within the vehicle is recirculated. This position can be used when driving on a dusty road or in similar conditions. It also helps to provide quicker cooling of the interior. WARNING The Recirculated Air Position: Using the position in cold weather will cause the glass to fog up. Your vision will be hampered, which could lead to a serious accident.
J16L_EA.book Page 8 Friday, February 22, 2002 11:34 AM Interior Comfort Climate Control System 5. Adjust the fan control dial and temperature control dial to maintain maximum comfort. ▼ Ventilation CAUTION When using the air conditioner while driving up long hills or in heavy traffic, closely monitor the temperature gauge (page 5-21). The air conditioner may cause engine overheating. If the gauge indicates overheating, turn the air conditioner off.
J16L_EA.book Page 9 Friday, February 22, 2002 11:34 AM Interior Comfort Climate Control System 3. Set the fan control dial to the desired speed. ▼ Dehumidifying (With Air Conditioner) WARNING Foggy Windshield: Using the position with the temperature control set to the cold position will cause the outside of the glass to fog up. Your vision will be hampered, which could lead to a serious accident. Set the temperature control to the hot or warm position when using the position.
J16L_EA.book Page 10 Friday, February 22, 2002 11:34 AM Interior Comfort Climate Control System Vent Operation (Rear) Knob ▼ Adjusting the Vents Directing airflow You can direct air flow by moving the adjustment knob. NOTE When using the air conditioner, mist may come out from the vents. This is not a sign of trouble but a result of humid air being suddenly cooled. 6-10 Form No.
J16L_EA.book Page 11 Friday, February 22, 2002 11:34 AM Interior Comfort Climate Control System ▼ Selecting the Airflow Mode Floor Vents Roof Vents Roof and Floor Vents 6-11 Form No.
J16L_EA.book Page 12 Friday, February 22, 2002 11:34 AM Interior Comfort Climate Control System Control Panel (Rear) Type A NOTE: 0 1 2 (Rear heater type) Supplies only hot air out of floor outlets. 3 (Rear cooler type) Supplies only cold air out of roof vents. Fan control dial Type B NOTE: 0 1 2 Supplies cold or hot air out of roof vents and/or floor outlets.
J16L_EA.book Page 13 Friday, February 22, 2002 11:34 AM Interior Comfort Climate Control System Fan control dial 0 Mode selector dial (Type B) 1 2 3 This dial allows variable fan speeds. Turn the mode selector dial to select airflow mode (page 6-11). 0—Fan off 1—Low speed 2—Medium speed 3—High speed NOTE When the rear air-conditioner main switch is not set to the REAR position, the fan control dial of the rear airconditioner control panel does not work.
J16L_EA.book Page 14 Friday, February 22, 2002 11:34 AM Interior Comfort Audio System Antenna ▼ Detachable Type To remove the antenna, turn it counterclockwise. To install the antenna, turn it clockwise. Make sure the antenna is security installed. Operating Tips for Audio System ▼ Radio Reception AM characteristics AM signals bend around such things as buildings or mountains and bounce off the ionosphere. Therefore, they can reach longer distances than FM signals.
J16L_EA.book Page 15 Friday, February 22, 2002 11:34 AM Interior Comfort Audio System Signals from an FM transmitter are similar to beams of light because they do not bend around corners, but they do reflect. Unlike AM signals, FM signals cannot travel beyond the horizon. Therefore, FM stations cannot be received at the great distances possible with AM reception.
J16L_EA.book Page 16 Friday, February 22, 2002 11:34 AM Interior Comfort Audio System Strong signal noise This occurs very close to a transmitter tower. The broadcast signals are extremely strong, so the result is noise and sound breakup at the radio receiver. Station drift noise When a vehicle reaches the area of two strong stations broadcasting at similar frequencies, the original station may be temporarily lost and the second station picked up.
J16L_EA.book Page 17 Friday, February 22, 2002 11:34 AM Interior Comfort Audio System • If the cassette tape is loose, it may produce poor sound or performance during playback. Use a pencil or something similar to remove any slack. • Only cassette tapes that play no longer than 90 minutes should be used. Cassette tape exceeding 90 minutes are thin and may easily break. • Do not leave a cassette tape in the tape player slot when not in use.
J16L_EA.book Page 18 Friday, February 22, 2002 11:34 AM Interior Comfort Audio System • Store MDs in their cases and away from direct sunlight. • Do not insert any objects, other than CDs, into the slot. • Do not insert fingers or foreign objects in the MD insertion slot as it could damage the MD deck.
J16L_EA.book Page 19 Friday, February 22, 2002 11:34 AM Interior Comfort Audio System • A new CD may have rough edges on its inner and outer perimeters. If a disc with rough edges is used, proper setting will not be possible and the CD player/changer will not play the CD. Remove the rough edges in advance by using a ball-point pen or pencil as shown below. To remove the rough edges, rub the side of the pen or pencil against the inner and outer perimeter of the CD.
J16L_EA.book Page 20 Friday, February 22, 2002 11:34 AM Interior Comfort Audio System • Do not insert cleaning discs in the CD player/changer. • Do not insert any disc with a peel-off or seal on it. 6-20 Form No.
J16L_EA.book Page 21 Friday, February 22, 2002 11:34 AM Interior Comfort Audio System Audio Set CD Player In-dash CD Changer Illustration is of a representative audio unit. Cassette Tape Player Mini Disc (MD) Player Power/Volume/Sound Controls ............................................................................................. 6-22 Clock .....................................................................................................................................
J16L_EA.book Page 22 Friday, February 22, 2002 11:34 AM Interior Comfort Audio System ▼ Power/Volume/Sound Controls Display Power/Volume knob Audio control knob Power ON/OFF Volume adjustment Turn the ignition switch to the ACC or ON position. To adjust the volume, turn the power/ volume knob. Press the power/volume knob to turn the audio system on. Press the power/volume knob again to turn the audio system off.
J16L_EA.book Page 23 Friday, February 22, 2002 11:34 AM Interior Comfort Audio System Audio sound adjustment 1. Press the audio control knob to select bass, mid-range, treble, fade or balance control. The selected function will be indicated. NOTE About 5 seconds after selecting any mode, the volume function will be automatically selected. To reset bass, mid-range, treble, fade, and balance, press the audio control knob for 2 seconds. The unit will beep and "CL" will be displayed. 2.
J16L_EA.book Page 24 Friday, February 22, 2002 11:34 AM Interior Comfort Audio System ▼ Clock Display Clock button Hour set button Minute set button Setting the time Exact hour adjustment The clock can be set at any time when the ignition switch is in the ACC or ON position. 1. To set the exact hour, press the clock button ( ) for about 2 seconds until a beep is heard. The clock’s current time will flash. 1. To adjust the time, press the clock button ( ) for about 2 seconds until a beep is heard.
J16L_EA.book Page 25 Friday, February 22, 2002 11:34 AM Interior Comfort Audio System Changing the display mode The display on the unit can be changed by pressing the clock button ( ). This alternates the display between time and audio. When the clock mode has been selected, the time will be displayed. NOTE If audio operation is selected while the time mode is on, the selected audio mode will be displayed for ten seconds, then the display will revert to the time mode. 6-25 Form No.
J16L_EA.book Page 26 Friday, February 22, 2002 11:34 AM Interior Comfort Audio System ▼ Operating the Radio Display Band selector buttons Seek tuning: Higher frequency Scan button Lower frequency Auto memory button Channel preset buttons Tuning Radio ON Press a band selector button ( ) to turn the radio on. Manual tuning knob or Band selection Choose AM by pressing the AM button ( ) and FM by pressing the FM1/2 button ( ). The selected mode will be indicated.
J16L_EA.book Page 27 Friday, February 22, 2002 11:34 AM Interior Comfort Audio System Seek tuning Pressing the seek tuning button ( , ) will cause the tuner to seek a higher or lower frequency automatically. NOTE If you continue to press and hold the button, the frequency will continue changing without stopping. Scan tuning Press the scan button ( ) to automatically sample strong stations. Scanning stops at each station for about 5 seconds.
J16L_EA.book Page 28 Friday, February 22, 2002 11:34 AM Interior Comfort Audio System ▼ Operating the Cassette Tape Player Display Cassette tape play button Fast-forward button APC button: (next program) (one being played) Rewind button Repeat button Dolby NR button Cassette tape eject button Program button Cassette tape insert Playing Insert the cassette tape into the slot, open edge to the right and cassette tape will begin play and "TAPE" will be displayed.
J16L_EA.book Page 29 Friday, February 22, 2002 11:34 AM Interior Comfort Audio System * Noise reduction system manufactured under license from Dolby Laboratories Licensing Corporation. Dolby and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Ejecting the cassette tape Press the cassette tape eject button ( eject the cassette tape. ) to Press the APC button ( ) to the beginning of the next selection. Press the APC button ( ) to the beginning of the one being played.
J16L_EA.book Page 30 Friday, February 22, 2002 11:34 AM Interior Comfort Audio System ▼ Operating the Mini Disc (MD) Player Display MD play button Fast-forward button Track up button Scan button Track down button MD slot Reverse button Display button MD eject button Repeat button Random button MD display Inserting the MD Fast-forward/Reverse Insert the MD, label-side up with the arrow pointed to the slot. The autoloading mechanism will set the MD and begin play.
J16L_EA.book Page 31 Friday, February 22, 2002 11:34 AM Interior Comfort Audio System Music scan Changing the MD display This feature helps to find a program by playing about the first 10 seconds of each track. To change the MD display during MD play, press and hold the display button ( ) for about half a second to advance through each of the following displays: Press the scan button ( ) during play to start scan play operation (the track number will flash).
J16L_EA.book Page 32 Friday, February 22, 2002 11:34 AM Interior Comfort Audio System ▼ Operating the Compact Disc (CD) Player Disc-in indicator CD play button CD eject button CD slot Display Fast-forward button Scan button Track up button Track down button Reverse button Random button Repeat button Inserting the CD Fast-forward/Reverse Insert the CD into the slot, label-side up. The auto-loading mechanism will set the CD and begin play.
J16L_EA.book Page 33 Friday, February 22, 2002 11:34 AM Interior Comfort Audio System Music scan This feature helps to find a program by playing about the first 10 seconds of each track. Press the scan button ( ) during play to start scan play operation (the track number will flash). Press the scan button ( ) once again to cancel scan play. NOTE If the unit is left in scan, normal play will resume where scan was selected. Repeat play This feature makes it possible to listen to a selection repeatedly.
J16L_EA.book Page 34 Friday, February 22, 2002 11:34 AM Interior Comfort Audio System ▼ Operating the In-Dash CD Changer CD play button CD eject button CD slot Display Fast-forward button Load button Track up button Scan button Track down button Auto memory button Disc down button Reverse button Disc up button Random button Repeat button Power/Volume knob Inserting the CD Normal insertion The CD must be label-side up when inserting. The auto-loading mechanism will set the CD and begin play.
J16L_EA.book Page 35 Friday, February 22, 2002 11:34 AM Interior Comfort Audio System Multiple insertion Multiple ejection 1. Press and hold the load button ( ) for about 2 seconds until a beep is heard. 1. Press and hold the CD eject button ( for about 2 seconds until a beep is heard. 2. When "In" is displayed, insert the CD. 2. Wait 5 seconds or press the CD eject button ( ) again within 5 seconds after the beep is heard. 3. When "In" is displayed again, insert the next CD. ) 3.
J16L_EA.book Page 36 Friday, February 22, 2002 11:34 AM Interior Comfort Audio System Disc search Press the disc up button ( ) to skip forward to the beginning of the next CD. Press the disc down button ( ) to skip back to the beginning of the previous CD. Music scan This feature helps to find a program by playing about the first 10 seconds of each track. Press the scan button ( ) during play to start scan play operation (the track number will flash).
J16L_EA.book Page 37 Friday, February 22, 2002 11:34 AM Interior Comfort Audio System ▼ Error Indications If you see an error indication on the display, find the cause in the chart. If you cannot clear the error indication, take the vehicle to an Authorized Mazda Dealer. Indication Cause CHECK MD MD is inserted upside down CHECK MD MD is defective CHECK CD CD is inserted upside down CHECK CD CD is defective Solution Insert the MD properly.
J16L_EA.book Page 38 Friday, February 22, 2002 11:34 AM Interior Comfort Audio System Audio Control Switch Operation ▼ Adjusting the Volume To increase the volume, press volume button ( ). To decrease the volume, press volume button ( ). WARNING Using Audio Control Panel: Using the audio control panel while driving is dangerous. Your attention could be diverted and cause an accident. When driving, always use the audio system operation from the audio control switch. 6-38 Form No.
J16L_EA.book Page 39 Friday, February 22, 2002 11:34 AM Interior Comfort Audio System ▼ Seek Switch When listening to the radio Press the seek switch ( ) to seek a higher frequency automatically. When playing a cassette tape Press the seek switch ( ), release, and it will advance to the next selection. When playing a CD or MD Press the seek switch ( next track. ) to skip to the ▼ Mute Switch Press the mute switch ( ) once to mute audio, press it again to resume audio output. 6-39 Form No.
J16L_EA.book Page 40 Friday, February 22, 2002 11:34 AM Interior Comfort Audio System Safety Certification This CD player is made and tested to meet exacting safety standards. It meets FCC requirements and complies with safety performance standards of the U.S. Department of Health and Human Services. CAUTION • This CD player should not be adjusted or repaired by anyone except qualified service personnel. If servicing is required, contact an Authorized Mazda Dealer.
J16L_EA.book Page 41 Friday, February 22, 2002 11:34 AM Interior Comfort Interior Equipment Sunvisors When you need a sunvisor, lower it for use in front or swing it to the side. Sunvisor Interior Lights ▼ Illuminated Entry System When the switch is in the DOOR position, the overhead light, the luggage compartment light and the courtesy lights come on for: • about 30 seconds after the driver’s door is unlocked and the ignition key is removed. • about 15 seconds after all doors are closed.
J16L_EA.book Page 42 Friday, February 22, 2002 11:34 AM Interior Comfort Interior Equipment ▼ Overhead Lights OFF Front DOOR Without sunroof (with overhead console) Light off • Light on when any door or the liftgate is open • Light on or off when the illuminated entry system is on. Rear DOO R OFF Without sunroof (without overhead console) OFF OFF DOOR DOOR OFF ON With sunroof DOOR OFF 6-42 Form No.
J16L_EA.book Page 43 Friday, February 22, 2002 11:34 AM Interior Comfort Interior Equipment ▼ Map Lights ▼ Luggage Compartment Light The map lights are switched on or off by pressing the switches. Without sunroof (with overhead console) ON DOO R OFF OFF OFF Map light Without sunroof (without overhead console) Map light ON Light off • Light on when any door or the liftgate is open • Light on or off when the illuminated entry system is on.
J16L_EA.book Page 44 Friday, February 22, 2002 11:34 AM Interior Comfort Interior Equipment Lighter The ignition switch must be in the ACC or ON position. Press the lighter in and release it. When ready for use, it automatically pops out. Ashtrays CAUTION Don’t use ashtrays for trash. You might start a fire. ▼ Front To open, pull the tray out and open the cover. CAUTION • Don’t touch the metal part of the lighter, you may burn yourself. • Don’t hold the lighter in because it will overheat.
J16L_EA.book Page 45 Friday, February 22, 2002 11:34 AM Interior Comfort Interior Equipment ▼ Rear Type B CAUTION To remove, open and push down on the lock spring. Using an ashtray removed from its fixed position or not completely inserted is dangerous. Cigarettes could roll around or spill out of the ashtray into the vehicle and start a fire. Moreover, cigarette stubs will not extinguish themselves completely even if the ashtray lid is closed.
J16L_EA.book Page 46 Friday, February 22, 2002 11:34 AM Interior Comfort Interior Equipment Cup Holders ▼ Rear Second seat (Passenger seat only) WARNING Using the Cup Holder: Using the cup holder to hold hot liquids while the vehicle is moving is dangerous. If the contents spill, you could be scalded. Never use the cup holder to hold hot liquids while the vehicle is moving. The rear cup holders are on the right of the second-row seat. To use the cup holder, pull it out.
J16L_EA.book Page 47 Friday, February 22, 2002 11:34 AM Interior Comfort Interior Equipment To collapse the table ▼ Bottle Holders 1. Push the cup holder back into the table. Bottle holders are on the inside of the sliding doors. 2. Pull the lever under the table, then lower it. After the table is collapsed, press the table surface to lock it in place. CAUTION Third seat If an ashtray is equipped, pull it out and use the hole for an additional cup holder.
J16L_EA.book Page 48 Friday, February 22, 2002 11:34 AM Interior Comfort Interior Equipment Storage Compartments WARNING 2. Take out the two pieces of urethane spacer. 3. Open the cap by pushing it from inside the box. Open Storage Boxes: Driving with the storage boxes open is dangerous. To reduce the possibility of injury in an accident or a sudden stop, keep the storage boxes closed when driving.
J16L_EA.book Page 49 Friday, February 22, 2002 11:34 AM Interior Comfort Interior Equipment ▼ Glove Box To open the glove box, pull the latch toward you. The door has a lock, insert the key and turn it clockwise to lock, counterclockwise to unlock. ▼ Under Seat Tray (Front Passenger Seat Only) Lift the latch and pull the tray forward. Unlock Lock ▼ Storage Box (In Seat Side Table) To use the storage box ▼ Front Console 1. Raise the table. Pull the latch to open. 2. Push the button to open.
J16L_EA.book Page 50 Friday, February 22, 2002 11:34 AM Interior Comfort Interior Equipment To collapse the table ▼ Cargo Securing Loops 1. Close the lid on the storage box. 2. Pull the lever under the table, then lower it. After the table is collapsed, press the table surface to lock it in place. WARNING Not Securing Cargo: Not securing cargo while driving is dangerous. The cargo could move or be crushed in sudden braking or a collision and cause injury.
J16L_EA.book Page 51 Friday, February 22, 2002 11:34 AM Interior Comfort Interior Equipment ▼ Shopping Bag Hooks The shopping bag hooks can be used for hanging shopping bags. The tensile strength of the hooks is 29 N (3 kgf, 7 lbf). Do not hang excessive weight to the hooks as they will be damaged. Accessory Sockets The ignition switch must be in the ACC or ON position. Only use genuine Mazda accessories or the equivalent requiring no greater than 12V—10A. Front Cap Rear 6-51 Form No.
J16L_EA.book Page 52 Friday, February 22, 2002 11:34 AM Interior Comfort Interior Equipment CAUTION To prevent accessory socket damage or electrical failure, pay attention to the following; • Don’t use accessories that require more than 12V—10A. • Don’t use accessories that are not genuine Mazda accessories or the equivalent. • Close the cover when the accessory socket is not in use. • Correctly insert the plug into the accessory socket.
J16L_EA.book Page 1 Friday, February 22, 2002 11:34 AM 7 In Case of an Emergency Helpful information on what to do in an emergency. Parking in an Emergency ........................................................... 7- 2 Parking in an Emergency ......................................................... 7- 2 Flat Tire ........................................................................................ 7- 3 Spare Tire and Tool Storage ....................................................
J16L_EA.book Page 2 Friday, February 22, 2002 11:34 AM In Case of an Emergency Parking in an Emergency Parking in an Emergency The hazard warning lights should always be used when you stop on or near a roadway. The hazard warning lights warn other drivers that your vehicle is a traffic hazard and that they must take extreme caution when near it. Hazard warning flasher switch Depress the hazard warning switch and all four turn signals will flash at once.
J16L_EA.book Page 3 Friday, February 22, 2002 11:34 AM In Case of an Emergency Flat Tire Spare Tire and Tool Storage Spare tire and tools are stored in the locations illustrated in the diagram. Jack Tool bag Spare tire Spare tire lever Lug wrench Jack lever Tire clamp Jack handle Flat tire securing bolt Vinyl bag 7-3 Form No.
J16L_EA.book Page 4 Friday, February 22, 2002 11:34 AM In Case of an Emergency Flat Tire ▼ Jack To secure the jack To remove the jack Perform the removal procedure in reverse. 1. Remove the cover. ▼ Spare Tire Your Mazda has a temporary spare tire. It’s lighter and smaller than a conventional tire, and is designed only for emergency use and should be used only for VERY short periods. Temporary spares should NEVER be used for long drives or extended periods.
J16L_EA.book Page 5 Friday, February 22, 2002 11:34 AM In Case of an Emergency Flat Tire To remove the spare tire CAUTION To avoid damage to the temporary spare or to the vehicle, observe the following precautions: • Don’t exceed 80 km/h (50 mph). • Avoid driving over obstacles. Also, don’t drive through an automatic car wash. This tire’s diameter is smaller than a conventional tire’s, so the ground clearance is reduced about 25 mm (1 in). 1.
J16L_EA.book Page 6 Friday, February 22, 2002 11:34 AM In Case of an Emergency Flat Tire 3. Locate the spare tire carrier socket cap on the right, in front of the second-row seat. Unscrew it by turning it counterclockwise. 7. Slowly turn the handle counterclockwise until the spare tire reaches the ground and the cable becomes loose. Spare tire 4. Remove the spare tire lever and jack handle from the tool bag. CAUTION 5. Raise the reclining lever and lower the seatback forward.
J16L_EA.book Page 7 Friday, February 22, 2002 11:34 AM In Case of an Emergency Flat Tire 8. Rotate the small lever on top of the retaining plate and pull the retaining plate out from the center hole of the tire. Retaining plate To secure the spare tire 1. Place the tire with the outer side facing upward, rotate the small lever on top of the retaining plate and slide the retaining plate through the center hole of the tire. Rotate the small lever into place.
J16L_EA.book Page 8 Friday, February 22, 2002 11:34 AM In Case of an Emergency Flat Tire CAUTION • If you hear rattling from the spare tire carrier while the vehicle is moving, the spare tire carrier cable may be cut. Have it repaired at an Authorized Mazda Dealer as soon as possible. • When the spare tire carrier socket cap is screwed completely tight, the spare tire is locked in the highest position.
J16L_EA.book Page 9 Friday, February 22, 2002 11:34 AM In Case of an Emergency Flat Tire NOTE Make sure the jack is well lubricated before using it. 1. Park on a level surface off the right-ofway and firmly set the parking brake. 2. Shift into Park (P) and turn off the engine. 3. Turn on the hazard warning flasher. 4. Have everyone get out of the vehicle and away from the vehicle and traffic.
J16L_EA.book Page 10 Friday, February 22, 2002 11:34 AM In Case of an Emergency Flat Tire CAUTION Align the notch on the wheel cover with the valve stem when installing it. 3. Place the jack under the jacking position closest to the tire being changed. Notch Tire valve Jacking position Damage could occur during installation if the wheel cover is not properly aligned. 2.
J16L_EA.book Page 11 Friday, February 22, 2002 11:34 AM In Case of an Emergency Flat Tire 4. Insert the jack lever and attach the jack handle to tire jack. Jack handle Jack lever 5. Turn the jack handle clockwise and raise the vehicle high enough so that the spare tire can be installed. Before removing the lug nuts, make sure your Mazda is firmly in position and that it cannot slip or move.
J16L_EA.book Page 12 Friday, February 22, 2002 11:34 AM In Case of an Emergency Flat Tire To replace the nut 1. Place the key on top of the nut. 3. Install the lug nuts with the beveled edge inward; tighten them by hand. 2. Place the lug wrench on top of the key, apply pressure, and turn it clockwise. ▼ Mounting the Spare Tire 1. Remove dirt and grime from the mounting surfaces of the wheel and hub, including the hub bolts, with a cloth.
J16L_EA.book Page 13 Friday, February 22, 2002 11:34 AM In Case of an Emergency Flat Tire 4. Turn the jack handle counterclockwise and lower the vehicle. Use the lug wrench to tighten the nuts in the order shown. If you’re unsure of how tight the nuts should be, have them inspected at a service station. Nut tightening torque: N·m (kgf·m, ft·lbf) 108—147 (11—15, 80—108) WARNING Loose Lug Nuts: Improperly or loosely tightened lug nuts are dangerous. The wheel could wobble or come off.
J16L_EA.book Page 14 Friday, February 22, 2002 11:34 AM In Case of an Emergency Flat Tire 6. With the tire facing outward, punch a hole through the vinyl bag and the center hole, using the flat tire securing bolt. 8. Install the flat tire with the tire securing bolt hooked in the anchor clip as shown below. Flat tire securing bolt 7. Lift the anchor clip on the back of third-row seat. 9. Secure the flat tire with the tire clamp and wing nut as shown below.
J16L_EA.book Page 15 Friday, February 22, 2002 11:34 AM In Case of an Emergency Overheating Overheating If the temperature gauge indicates overheating, you experience power loss, or you hear a loud knocking or pinging noise, the engine is probably too hot. If this happens: 1. Drive safely to the side of the road and park off the right-of-way. 2. Shift into park (P). Apply the parking brake. 3. Turn off the air conditioner.
J16L_EA.book Page 16 Friday, February 22, 2002 11:34 AM In Case of an Emergency Overheating WARNING Cooling System Cap: When the engine and radiator are hot, scalding coolant and steam may shoot out under pressure and cause serious injury. Don’t remove the cooling system cap when the engine and radiator are hot. CAUTION If the engine continues to overheat or frequently overheats, have the cooling system inspected. The engine could be seriously damaged unless repairs are made. 7-16 Form No.
J16L_EA.book Page 17 Friday, February 22, 2002 11:34 AM In Case of an Emergency Emergency Starting Starting a Flooded Engine If the engine fails to start, it may be flooded (excessive fuel in the engine). Follow this procedure: 1. Depress the accelerator all the way and hold it there. 2. Turn the ignition switch to the START position and hold it there—for up to 10 seconds. If the engine starts, release the key and accelerator immediately because the engine will suddenly rev up. 3.
J16L_EA.book Page 18 Friday, February 22, 2002 11:34 AM In Case of an Emergency Emergency Starting 2. If the booster battery is in another vehicle, don’t allow the vehicles to touch. Turn off the engine of the vehicle with the booster battery and all unnecessary electrical loads in both vehicles. 3. Connect the jumper cables in the exact sequence as in the illustration. • Connect one end of a cable to the positive terminal on the discharged battery (1).
J16L_EA.book Page 19 Friday, February 22, 2002 11:34 AM In Case of an Emergency Emergency Starting Push-Starting You can’t start a vehicle with an automatic transaxle by pushing it. 7-19 Form No.
J16L_EA.book Page 20 Friday, February 22, 2002 11:34 AM In Case of an Emergency Emergency Towing Towing Description We recommend that towing be done only by an Authorized Mazda Dealer or a commercial tow-truck service. Proper lifting and towing are necessary to prevent damage to the vehicle. Government and local laws must be followed. CAUTION Don’t tow the vehicle pointed backward with driving wheels on the ground. This may cause internal damage to the transaxle.
J16L_EA.book Page 21 Friday, February 22, 2002 11:34 AM In Case of an Emergency Emergency Towing Tiedown Hooks CAUTION Don’t use the tiedown hooks under the front and rear for towing. They are designed ONLY for tying down the vehicle when it’s being transported. Using them for towing will damage the bumper. Recreational Towing An example of “ recreational towing ” is towing your vehicle behind a motorhome. The transaxle is not designed for towing this vehicle on all 4 wheels.
J16L_EA.book Page 22 Friday, February 22, 2002 11:34 AM 7-22 Form No.
J16L_EA.book Page 1 Friday, February 22, 2002 11:34 AM 8 Maintenance and Care How to keep your Mazda in top condition. Introduction ................................................................................. 8- 2 Introduction ............................................................................. 8- 2 Scheduled Maintenance .............................................................. 8- 3 Scheduled Maintenance ...........................................................
J16L_EA.book Page 2 Friday, February 22, 2002 11:34 AM Maintenance and Care Introduction Introduction Be extremely careful and prevent injury to yourself and others or damage to your vehicle when using this manual for inspection and maintenance. If you’re unsure about any procedure it describes, we strongly urge you to have a reliable and qualified service shop perform the work, preferably an Authorized Mazda Dealer. Factory-trained Mazda technicians and genuine Mazda parts are best for your vehicle.
J16L_EA.book Page 3 Friday, February 22, 2002 11:34 AM Maintenance and Care Scheduled Maintenance Scheduled Maintenance Follow Schedule 1 if the vehicle is operated mainly where none of the following conditions apply. If any do apply, follow Schedule 2 (Canada and Puerto Rico residents follow Schedule 2).
J16L_EA.book Page 4 Friday, February 22, 2002 11:34 AM Maintenance and Care Scheduled Maintenance ▼ Schedule 1 I : Inspect and repair, clean, adjust, or replace if necessary. (Oil-permeated air cleaner elements cannot be cleaned using the air-blow method.) R: Replace L: Lubricate Maintenance Interval (Number of months or kilometers (miles), whichever comes first) Engine oil Engine oil filter Drive belts Months ×1000 km 6 12 12 24 18 36 24 48 30 60 36 72 42 84 48 96 ×1000 miles 7.5 15 22.
J16L_EA.book Page 5 Friday, February 22, 2002 11:34 AM Maintenance and Care Scheduled Maintenance ▼ Schedule 2 I : Inspect and repair, clean, adjust, or replace if necessary. (Oil-permeated air cleaner elements cannot be cleaned using the air-blow method.
J16L_EA.book Page 6 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance Owner Maintenance Schedule The owner or a qualified service technician should make these vehicle inspections at the indicated intervals to ensure safe and dependable operation. Bring any problem to the attention of an Authorized Mazda Dealer or qualified service technician as soon as possible.
J16L_EA.book Page 7 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance Owner Maintenance Precautions Improper or incomplete service may result in problems. This section gives instructions only for items easy to perform. As explained in the Introduction (page 8-2), several procedure can be done only by a qualified service technician with special tools. Improper owner maintenance during the warranty period may affect warranty coverage.
J16L_EA.book Page 8 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance Engine Compartment Overview Automatic transaxle fluid-level dipstick Cooling system cap Brake fluid reservoir Engine coolant reservoir Power steering fluid reservoir Air filter Windshield washer fluid reservoir Fuse block Engine oil-filler cap Battery Engine oil dipstick Engine oil filter 8-8 Form No.
J16L_EA.book Page 9 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance When choosing an oil, consider the temperature range your vehicle will operate in before the next oil change. Then select the recommended viscosity from this chart. Engine Oil ▼ Recommended Oil Oil container labels provide important information. CAUTION Using oils of viscosity besides those recommended for specific temperature ranges could result in engine damage.
J16L_EA.book Page 10 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance 5. Pull it out again and examine the level. It’s OK between MIN and MAX. But if it’s near at or below MIN, add enough oil to bring the level to MAX. CAUTION Don’t add engine oil over MAX. This may cause engine damage. 6. Make sure the O-ring is positioned properly before reinserting the dipstick. Changing engine oil WARNING Checking or Changing Engine Oil: Hot engine oil is dangerous.
J16L_EA.book Page 11 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance Check the oil level and fill to the MAX mark if necessary. Oil capacity (General reference only, refer to Specifications section for capacities.) NOTE • The indicated engine oil capacities are for general reference purposes only. When adding or changing oil, verify the engine oil level with the oil dipstick. • Use only specified engine oil (page 10-4).
J16L_EA.book Page 12 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance If it’s at or near L, add enough coolant to the coolant reservoir to provide freezing and corrosion protection and to bring the level to F. CAUTION Radiator coolant will damage paint. Rinse it off quickly. Do not overfill. If new coolant is required frequently, consult an Authorized Mazda Dealer. ▼ Changing Coolant (Without Rear Heater) Change coolant according to Scheduled Maintenance (page 8-3).
J16L_EA.book Page 13 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance 2. Only when the engine is cool, remove the radiator drain plug and drain the coolant into a suitable container. 3. Flush out the system with running water. 4. Drain the system completely. Insert and tighten the plug. Add as much ethylene-glycol-based coolant and water as necessary to provide freezing and corrosion protection. 5.
J16L_EA.book Page 14 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance ▼ Adding Brake Fluid WARNING Spilled Brake Fluid: Spilled brake fluid is dangerous. If it gets in your eyes, they could be seriously injured. If this happens, immediately flush your eyes with water and get medical attention. Brake fluid spilled on a hot engine could cause a fire. Be careful not to spill brake fluid on yourself or on the engine. Low Brake Fluid Levels: Low brake fluid levels are dangerous.
J16L_EA.book Page 15 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance Automatic Transaxle Fluid (ATF) ▼ Inspecting Automatic Transaxle Fluid Level The automatic transaxle fluid level should be inspected regularly. Measure it as described below. The volume of fluid changes with the temperature. Fluid must be checked at idle without driving at normal operating temperature. CAUTION • Low fluid level causes transaxle slippage.
J16L_EA.book Page 16 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance CAUTION • Use the cold scale only as a reference. • If outside temperature is lower than about 20°C (70°F), start the engine and inspect the fluid level after the engine reaches operating temperature. • If the vehicle has been driven for an extended period at high speeds or in city traffic in hot weather, inspect the level only after stopping the engine and allowing the fluid to cool for 30 minutes.
J16L_EA.book Page 17 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance Body Lubrication All moving points of the body, such as door and hood hinges and locks, should be lubricated each time the engine oil is changed. Use a nonfreezing lubricant on locks during cold weather. Make sure the engine hood’s secondary latch keeps the hood from opening when the primary latch is released. Air Filter CAUTION Don’t drive without an air filter. This could result in excessive engine wear.
J16L_EA.book Page 18 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance 2. Separate the air cleaner housing and remove the filter. Wiper Blades Air filter CAUTION Hot waxes applied by automatic car washes have been known to affect the cleanability of windows. Contamination of either the windshield or the blades with foreign matter can reduce wiper effectiveness. Common sources are insects, tree sap, and hot wax treatments used by some commercial car washes. 3.
J16L_EA.book Page 19 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance ▼ Replacing Windshield Wiper Blades When the wipers no longer clean well, the blades are probably worn or cracked. Replace them. 2. Hold the end of the rubber and pull until the tabs are free of the metal support. Metal support CAUTION To prevent damage to the wiper arms and other components, don’t move the wipers by hand. 1. Raise the wiper arm and turn the blade assembly to expose the plastic locking clip.
J16L_EA.book Page 20 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance CAUTION • Don’t bend the stiffeners. You need to use them again. • If the metal stiffeners are switched, the blade’s wiping efficiency could be reduced. So don’t use the driver’s side metal stiffeners on the passenger’s side, or vice versa. • Be sure to reinstall the metal stiffeners in the new blade rubber so that the curve is the same as it was in the old blade rubber. 4.
J16L_EA.book Page 21 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance 2. Pull down the blade rubber and slide it out of the blade holder. 4. Carefully insert the new blade rubber. Then install the blade assembly in the reverse order of removal. Pull out 3. Remove the metal stiffeners from the blade rubber and install them in new blades. Stiffeners CAUTION Don’t bend the stiffeners. You need to use them again. 8-21 Form No.
J16L_EA.book Page 22 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance Battery ▼ Battery Maintenance WARNING Battery-Related Lead Materials: Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. Wash hands after handling. Spilled Battery Fluid: Spilled battery fluid is dangerous.
J16L_EA.book Page 23 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance Tires For reasons of proper performance, safety, and better fuel economy, always maintain recommended tire inflation pressures and stay within the recommended load limits and weight distribution. WARNING Using Different Tire Types: Driving your vehicle with different types of tires is dangerous. It could cause poor handling and poor braking; leading to loss of control.
J16L_EA.book Page 24 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance NOTE • Warm tires normally exceed recommended pressures. Don’t release air from warm tires to adjust the pressure. • Underinflation can cause reduced fuel economy and poor sealing of the tire bead, which will deform the wheel and cause separation of tire from rim. • Overinflation can produce a harsh ride and a greater possibility of damage from road hazards. Keep your tire pressure at the correct levels.
J16L_EA.book Page 25 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance ▼ Replacing a Tire ▼ Temporary Spare Tire WARNING Worn Tires: Driving with worn tires is dangerous. Reduced braking, steering, and traction could result in an accident. Always use tires that are in good condition. If a tire wears evenly, a wear indicator will appear as a solid band across the tread. Replace the tire when this happens.
J16L_EA.book Page 26 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance ▼ Replacing a Wheel When replacing a wheel, make sure the new one is the same as the original factory wheel in diameter, rim width, and offset. Proper tire balancing provides the best riding comfort and helps reduce tread wear. Out-of-balance tires can cause vibration and uneven wear, such as cupping and flat spots. WARNING Using a Wrong-Sized Wheel: Using a wrong-sized wheel is dangerous.
J16L_EA.book Page 27 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance Light Bulbs Overhead lights/Map lights Overhead light Parking lights Headlights Courtesy lights Fog lights Brake lights/Taillights Rear turn signal lights Front turn signal lights/Side-marker lights High-mount brake lights License plate lights Reverse lights Taillights Luggage compartment light 8-27 Form No.
J16L_EA.book Page 28 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance Your Mazda's headlights have replaceable halogen bulbs. WARNING Handling Halogen Bulbs: When a halogen bulb breaks, it is dangerous. These bulbs contain pressurized gas. If one is broken, it will explode and serious injuries could be caused by the flying glass. If the glass portion is touched with bare hands, body oil could cause the bulb to overheat and explode when lit.
J16L_EA.book Page 29 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance 9. Install in the reverse order of removal. NOTE • When reinstalling the sealing cover, make sure faces up. • Use the protective cover and carton to dispose of the old bulb promptly out of the reach of children. 8-29 Form No.
J16L_EA.book Page 30 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance ▼ Replacing a Bulb (Front) To replace the parking light bulbs, contact an Authorized Mazda Dealer. Front turn signal lights/ Side-marker lights 8-30 Form No.
J16L_EA.book Page 31 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance ▼ Replacing a Bulb (Interior) Overhead lights/Map lights (Without sunroof, with overhead console) Overhead lights/Map lights (Without either sunroof or overhead console) Overhead lights/Map lights (With sunroof) Overhead lights Courtesy lights Luggage compartment light ON OF F 8-31 Form No.
J16L_EA.book Page 32 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance ▼ Replacing a Bulb (Rear) Brake lights/Taillights Rear turn signal lights Reverse lights Taillights High-mount brake lights License plate lights An unsecured high-mount brake lights will allow water to leak into the vehicle. Make sure the high-mount brake light is tightly fastened to the vehicle and if water still leaks, consult an Authorized Mazda Dealer. 8-32 Form No.
J16L_EA.book Page 33 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance Fuses 3. Pull the fuse straight out with the fuse puller provided on the fuse panel. Your vehicle’s electrical system is protected by fuses. If any lights, accessories, or controls don’t work, inspect the appropriate circuit protector. If a fuse has blown, the inside element will be melted. If the same fuse blows again, avoid using that system and consult an Authorized Mazda Dealer as soon as possible.
J16L_EA.book Page 34 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance If the headlights or other electrical components don’t work and the fuses in the cabin are OK, inspect the fuse block under the hood. If a fuse is blown, it must be replaced. Follow these steps: 1. Turn off the ignition switch and all other switches. When replacing the 120A fuse: 1. Turn off the ignition switch. 2. Remove the negative battery terminal. 3. Remove the A nuts. 4.
J16L_EA.book Page 35 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance ▼ Fuse Panel Description Fuse block (Engine compartment) DESCRIPTION FUSE RATING 1 DEFOG 40A 2 BTN 60A 3 ABS 60A 4 5 6 FAN1 FAN2 HEATER 30A 30A 40A 7 R.HEATER 30A 8 IG KEY2 40A 9 A/C 10A PROTECTED COMPONENT Rear window defroster STOP, HAZARD, ROOM, D.
J16L_EA.book Page 36 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance Fuse block (Driver’s side) DESCRIPTION FUSE RATING 1 (P.WIND) 30A 2 WIPER 20A 3 (SUN ROOF) 15A 4 R.WIP 10A 5 (SEAT) 20A 6 (M.
J16L_EA.book Page 37 Friday, February 22, 2002 11:34 AM Maintenance and Care Owner Maintenance DESCRIPTION FUSE RATING 23 (ACC. DELAY) 30A 24 METER 15A 25 26 27 28 (ST.SIGN) CIGAR — — 10A 25A — — PROTECTED COMPONENT Power windows delay, For protection of various circuits Instrument cluster, INH switch Starter signal Lighter — — 8-37 Form No.
J16L_EA.book Page 38 Friday, February 22, 2002 11:34 AM Maintenance and Care Appearance Care How to Minimize Environmental Paint Damage The paintwork on your Mazda represents the latest technical developments in composition and methods of application. Environmental hazards, however, can harm the paint’s protective properties, if proper care is not taken. Here are some examples of possible damage, with tips on how to prevent them.
J16L_EA.book Page 39 Friday, February 22, 2002 11:34 AM Maintenance and Care Appearance Care ▼ Water Marks Occurrence Rain, fog, dew, and even tap water can contain harmful minerals such as salt and lime. If moisture containing these minerals settles on the vehicle and evaporates, the minerals will concentrate and harden to form white rings. The rings can damage your vehicle’s finish.
J16L_EA.book Page 40 Friday, February 22, 2002 11:34 AM Maintenance and Care Appearance Care Exterior Care To minimize scratches on the vehicle’s paint finish: Follow all label and container directions when using a chemical cleaner or polish. Read all warnings and cautions. • Rinse off any dirt or other foreign matter using lukewarm or cold water before washing. ▼ Maintaining the Finish • Use plenty of lukewarm or cold water and a soft cloth when washing the vehicle. Do not use a nylon cloth.
J16L_EA.book Page 41 Friday, February 22, 2002 11:34 AM Maintenance and Care Appearance Care Insects, tar, tree sap, bird droppings, industrial fallout, and similar deposits can damage the finish if not removed immediately. When prompt washing with plain water is ineffective, use a mild soap made for use on vehicles. Thoroughly rinse off all soap with lukewarm or cold water. Don’t allow soap to dry on the finish. After washing the vehicle, dry it with a clean chamois to prevent water spots from forming.
J16L_EA.book Page 42 Friday, February 22, 2002 11:34 AM Maintenance and Care Appearance Care CAUTION Don’t use steel wool, abrasive cleaners, or strong detergents containing highly alkaline or caustic agents on chrome-plated or anodized aluminum parts. This may result in damage to the protective coating and cause discoloration or paint deterioration. ▼ Underbody Maintenance Road chemicals and salt used for ice and snow removal and solvents used for dust control may collect on the underbody.
J16L_EA.book Page 43 Friday, February 22, 2002 11:34 AM Maintenance and Care Appearance Care Interior Care ▼ Dashboard Precautions Prevent caustic solutions such as perfume and cosmetic oils from contacting the dashboard. They’ll damage and discolor it. If these solutions get on the dashboard, wipe them off immediately. CAUTION Do not use glazing agents. Glazing agents contain ingredients which may cause discoloration, wrinkling, cracks and peeling.
J16L_EA.book Page 44 Friday, February 22, 2002 11:34 AM Maintenance and Care Appearance Care ▼ Cleaning the Window Interiors If the windows become covered with an oily, greasy, or waxy film, clean them with glass cleaner. Follow the directions on the container. CAUTION Don’t scrape or scratch the inside of the rear window. You may damage the rear window defroster grid. 8-44 Form No.
J16L_EA.book Page 1 Friday, February 22, 2002 11:34 AM 9 Customer Information Important consumer information including warranties and add-on equipment. Customer Assistance ................................................................... 9Customer Assistance (U.S.A.) ................................................. 9Customer Assistance (Canada) ................................................ 9Customer Assistance (Puerto Rico) .........................................
J16L_EA.book Page 2 Friday, February 22, 2002 11:34 AM Customer Information Customer Assistance Customer Assistance (U.S.A.) Your complete and permanent satisfaction is our business. We are here to serve you. All Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition.
J16L_EA.book Page 3 Friday, February 22, 2002 11:34 AM Customer Information Customer Assistance Customer Assistance (Canada) ▼ Satisfaction Review Process Your complete and permanent satisfaction is of primary concern to Mazda. All Authorized Mazda Dealers have both the knowledge and tools to keep your Mazda in top condition.
J16L_EA.book Page 4 Friday, February 22, 2002 11:34 AM Customer Information Customer Assistance Please recognize that the resolution of service problems in most cases requires the use of your Mazda dealer’s service facilities, personnel and equipment. We urge you to follow the above three steps in sequence therefore for most effective results. ▼ Mediation/Arbitration Program Occasionally a customer concern cannot be resolved through Mazda’s Customer Satisfaction Program.
J16L_EA.book Page 5 Friday, February 22, 2002 11:34 AM Customer Information Customer Assistance Provincial Administrators may be reached locally as listed below: Province/Territory British Columbia & Yukon Territories Alberta & Northwest Territories Saskatchewan Manitoba Ontario Atlantic Canada Quebec CAMVAP Number (604) 681-0312 (403) 426-0650 (306) 352-9259 (204) 942-7166 (416) 596-8824 (902) 422-5413 (418) 649-1330 ▼ Regional Offices REGIONAL OFFICES MAZDA CANADA INC.
J16L_EA.book Page 6 Friday, February 22, 2002 11:34 AM Customer Information Customer Assistance Customer Assistance (Puerto Rico) Your complete and permanent satisfaction is our business. That is why all Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition.
J16L_EA.book Page 7 Friday, February 22, 2002 11:34 AM Customer Information Mazda Importer/Distributors Importer/Distributor Distributor in Each Area ▼ U.S.A. ▼ CANADA Mazda North American Operations 7755 Irvine Center Drive Irvine, CA 92618-2922 U.S.A. P.O. Box 19734 Irvine, CA 92623-9734 U.S.A. TEL:1 (800) 222-5500 (in U.S.A.) (949) 727-1990 (outside U.S.A.) Mazda Canada Inc.
J16L_EA.book Page 8 Friday, February 22, 2002 11:34 AM Customer Information Warranty Warranties for Your Mazda • New Vehicle Limited Warranty • Distributor Major Component Limited Warranty (Canada only) • Safety Restraint System Limited Warranty • Anti-perforation Limited Warranty • Federal Emission Control Warranty (U.S.A. only) • Emission Defect Warranty • Emission Performance Warranty • California Emission Control Warranty (U.S.A.
J16L_EA.book Page 9 Friday, February 22, 2002 11:34 AM Customer Information Warranty Outside the United States and Canada Government regulations in the United States and Canada require that automobiles meet specific emission regulations and safety standards. Therefore, vehicles built for use in the United States, its territories, and Canada may differ from those sold in other countries.
J16L_EA.book Page 10 Friday, February 22, 2002 11:34 AM Customer Information Warranty Registering Your Vehicle in A Foreign Country (Except United States and Canada) Government regulations in your country could require that automobiles meet specific emission and safety standards. Vehicles built for your country may differ from those built for other countries. In addition to registration problems, satisfactory service may be difficult or even impossible in another country.
J16L_EA.book Page 11 Friday, February 22, 2002 11:34 AM Customer Information Warranty Add-On Non-Genuine Parts and Accessories Non-genuine parts and accessories for Mazda vehicles can be found in stores. These may fit your vehicle, but they are not approved by the Mazda for use with Mazda vehicles. When you install non-genuine parts or accessories, they could affect your vehicle’s performance or safety system; the Mazda warranty doesn’t cover this.
J16L_EA.book Page 12 Friday, February 22, 2002 11:34 AM Customer Information Warranty Cell Phones WARNING Use of Cell Phones and Other Devices by Driver: Although not Mazda products, use of any electrical devices such as cell phones, computers, portable radios, vehicle navigation or other devices by the driver while the vehicle is moving is dangerous. Dialing a number on a cell phone while driving also ties-up the driver’s hands.
J16L_EA.book Page 13 Friday, February 22, 2002 11:34 AM Customer Information Uniform Tire Quality Grading System (UTQGS) Uniform Tire Quality Grading System (UTQGS) This information relates to the tire grading system developed by the U.S. National Highway Traffic Safety Administration for grading tires by tread wear, traction, and temperature performance.
J16L_EA.book Page 14 Friday, February 22, 2002 11:34 AM Customer Information Uniform Tire Quality Grading System (UTQGS) WARNING The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure.
J16L_EA.book Page 15 Friday, February 22, 2002 11:34 AM Customer Information Reporting Safety Defects Reporting Safety Defects If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Mazda Motor Corporation (Your Mazda Importer/Distributor).
J16L_EA.book Page 16 Friday, February 22, 2002 11:34 AM Customer Information Service Publications Service Publications Factory-authorized Mazda service publications are available for owners who wish to do some of their own maintenance and repair. When requesting any of our publications through an Authorized Mazda Dealer, refer to the chart below. If they don’t have what you need in stock, they can order it for you. PUBLICATION ORDER NUMBER 9999 95 038B 02 9999 95 024G 02 9999 95 029C 02 (U.S.A.
J16L_EA.book Page 1 Friday, February 22, 2002 11:34 AM 10 Specifications Technical information about your Mazda. Identification Numbers ............................................................. 10- 2 Vehicle Information Labels ................................................... 10- 2 Specifications ............................................................................. 10- 4 Specifications ........................................................................ 10- 4 10-1 Form No.
J16L_EA.book Page 2 Friday, February 22, 2002 11:34 AM Identification Numbers Vehicle Information Labels ▼ Chassis Number ▼ Vehicle Identification Number The vehicle identification number legally identifies your vehicle. The number is on a plate attached to the left top side of the dashboard. This plate can easily be seen through the windshield. ▼ Vehicle Emission Control Information Label ▼ Motor Vehicle Safety Standard Label ▼ Tire Pressure Label 10-2 Form No.
J16L_EA.book Page 3 Friday, February 22, 2002 11:34 AM Identification Numbers ▼ Engine Number Front 10-3 Form No.
J16L_EA.book Page 4 Friday, February 22, 2002 11:34 AM Specifications Specifications ▼ Engine Item Classification DOHC-24V 60°V, 6-cylinder 89.0 × 79.5 mm (3.50 × 3.13 in) 2,967 ml (2,967 cc, 181.0 cu in) 10.0 Type Bore × Stroke Displacement Compression ratio ▼ Electrical System Item Classification 12V-48AH/5HR MF 12V-55AH/5HR MF 12 V - 110 A 12 V - 1.4 kW AGSF 32W AGSF 32WM 1.3—1.4 mm (0.051—0.
J16L_EA.book Page 5 Friday, February 22, 2002 11:34 AM Specifications ▼ Capacities (Approximate Quantities) Item With oil filter replacement Engine oil Without oil filter replacement With rear heater Coolant Without rear heater Automatic transaxle fluid With 4-Seasons package Washer fluid Without 4-Seasons package Fuel tank L 5.2 4.7 12.4 10.6 9.7 5.5 2.2 75 Unit US qt 5.5 5.0 13.1 11.2 10.3 5.8 2.3 19.8 (US gal) Imp qt 4.6 4.1 11.0 9.3 8.5 4.8 1.9 16.
J16L_EA.book Page 6 Friday, February 22, 2002 11:34 AM Specifications ▼ Light Bulbs Light bulb Headlights Front turn signal lights/Side-marker lights Fog lights Parking lights Rear turn signal lights Brake lights/Taillights Taillights High-mount brake light Reverse lights License plate lights Overhead lights/Map lights Overhead light Liftgate light Courtesy lights Wattage 60/55 21/5 55 5 21 21/5 5 5 18 5 5 8 8 5 ▼ Tires Check the tire pressure label for tire size and inflation pressure.
J16L_EA.book Page 1 Friday, February 22, 2002 11:34 AM 11 Index 11-1 Form No.
J16L_EA.book Page 2 Friday, February 22, 2002 11:34 AM Index A B Accessory Sockets ........................... 6-51 Add-On Non-Genuine Parts and Accessories ...................................... 9-11 Air Bag Systems .............................. 2-47 Air Conditioning System Gas specifications ..................... 10-5 Air Filter .......................................... 8-17 Antenna ............................................ 6-14 Anti-Lock Brake System (ABS) ........ 5-7 Warning light .............
J16L_EA.book Page 3 Friday, February 22, 2002 11:34 AM Index D E Dashboard Illumination ...................5-22 Daytime Running Lights ..................5-33 Defroster Rear window .............................5-36 Dimensions ......................................10-5 Door Locks ......................................... 3-8 Driving In Flooded Area ..................4-10 Driving Tips ....................................... 4-7 Automatic transaxle ..................5-11 Break-in period .....................
J16L_EA.book Page 4 Friday, February 22, 2002 11:34 AM Index H L Hazard Warning Flasher .................. 5-37 Hazardous Driving ............................. 4-8 Headlights Control ...................................... 5-32 Flashing .................................... 5-32 High-low beam ......................... 5-32 On reminder .............................. 5-32 Hood Release ................................... 3-24 Horn ................................................. 5-37 Label Information .....
J16L_EA.book Page 5 Friday, February 22, 2002 11:34 AM Index P S Paint Damage ...................................8-38 Parking Brake ..................................... 5-5 Parking in an Emergency ...................7-2 Power Door Locks ...........................3-10 Power Sliding Doors ........................3-12 Power Steering .................................5-12 Fluid ..........................................8-14 Power Windows ...............................3-19 Push-Starting ....................
J16L_EA.book Page 6 Friday, February 22, 2002 11:34 AM Index T W Inflation pressure ...................... 8-23 Replacement ............................. 8-25 Rotation .................................... 8-24 Snow tires ................................... 4-9 Spare tire and tool storage .......... 7-3 Specifications ........................... 10-6 Tire chains ................................ 4-10 Uniform tire quality grading system (UTQGS) ...................... 9-13 Tool ..............................
