5 Drawers Cabinet Assembly Instructions Product Dimensions: 15.75”L×15.75”D×25.98”H Please take a moment to read through the entire instruction booklet before assembly to familiarize yourself with this product. Once you feel ready to start, follow the instructions step by step and this should make this process as easy as we could make it for you.
WARNING CAUTION ! ADULT ASSEMBLY REQUIRED CHOKING HAZARD • This product includes small parts, sharp points and sharp edges in its unassembled state. Keep unassembled parts away from children under 3 years of age, and animals. SAFETY WARNINGS • Follow the information on the warnings appearing on table and on the carton. Do not remove warning label from cabinet. • Do not allow children under 3 years of age to use the cabinet. • Do not use substitute parts.
ASSEMBLY AT A GLANCE Please take a moment to read through the whole instruction booklet before assembly to familiarize yourself with this product . Once you feel ready to start, follow the instructions step by step and this should mak e this process as easy as we could make it for you. 1 5 4 6 3 2 10 9 11 8 7 This drawing is to give you an overall idea only of how this assembly will go together and does not replace the assembly instructions.
COMPONENT PARTS Please check that you have all the parts listed below 1 1. Top Panel ×1 2. Bottom Panel×1 3. Left Side Panel×1 4. Right Side Panel×1 5. Back Side Panel×1 6. Support ×1 7. Drawer Front ×1 8. Drawer Left ×1 9. Drawer Right ×1 10. Drawer Back ×1 11.
ASSEMBLY INSTRUCTIONS 1 Select A×20,B×10 and 3×1, A A 4×1. Position 3 in the left, A A A position 4 in the right. Insert A A A A×5 into the one side of the A B, and other A×5 into the A B other side of the B.Insert B×5 B B into the 3.Repeat the steps B for the 4. B A A A A A A B B 3 A A 6 4 E D D 6 E C 3 3 Page 5 of 10 A B B B 4 2 Insert C and D into the hole of the 3 into the 6.Insert E into one side of 6 into 3. Repeat D and E for the 6 and 4.
ASSEMBLY COMPLETE $0/(3"56-"5*0/ :063 TAYLOR 5 DRAWERS CABINET IS COMPLETE! Page 10 of 10
ASSEMBLY INSTRUCTIONS 5 Stand up the 3 and the 4, put the wheels down to the bottom. Install the 5 along the grooves on both sides of the 3 and the 4. 5 4 3 6 1 Select C× 4, D×4, E×4. Insert C×4 ,D×4 into the 1 into the 3 and the 4 tightly. Insert E ×2 into the top corners of the 3.Repeat the steps for the other E into the 4.
ASSEMBLY INSTRUCTIONS 7 Insert C×2, D×2 into the 7 and the 8. Repeat the same steps for the 7 and the 9. Insert the E into the end of the 8. Repeat for the 9. 9 C E C 8 D D E 7 7 8 10 Select F× 4. Install the 11 along the grooves on the both sides of the 8 and the 9.Install the 10 on the 8,9 and the 11.Insert the F×2 into the 8 into the 10 to consolidation.
ASSEMBLY INSTRUCTIONS 9 Select I×10, 8×5, 9×5. Insert I ×2 into the two sides of the 8 and the 9. Repeat for other 8 and 9. The Drawer ×5 are completed. Install the Drawers into the Drawer Table.
Taylor 5 Drawers Cabinet Assembly Instructions Product Dimensions: 15.75”L×15.75”D×25.98”H Please take a moment to read through the entire instruction booklet before assembly to familiarize yourself with this product. Once you feel ready to start, follow the instructions step by step and this should make this process as easy as we could make it for you.