Executive L-Shaped Desk Assembly Instructions Product Dimensions: 59.84”L×23.62”D×29.53”H Please take a moment to read through the entire instruction booklet before assembly to familiarize yourself with this product. Once you feel ready to start, follow the instructions step by step and this should make this process as easy as we could make it for you.
WARNING ! CAUTION ADULT ASSEMBLY REQUIRED CHOKING HAZARD • This product includes small parts, sharp points and sharp edges in its unassembled state. Keep unassembled parts away from children under 3 years of age, and animals. SAFETY WARNINGS • Follow the information on the warnings appearing on table and on the carton. Do not remove warning label from cabinet. • Do not allow children under 3 years of age to use the desk. • Do not use substitute parts.
ASSEMBLY AT A GLANCE Please take a moment to read through the whole instruction booklet before assembly to familiarize yourself with this product. Once you feel ready to start, follow the instructions step by step and this should make this process as easy as we could make it for you.
COMPONENT PARTS Please check that you have all the parts listed below 1. Top Panel ×1 2. Small Panel ×2 3. Left Desk Top Panel ×1 4. Left Desk Left Side Panel ×1 5. Left Desk Right Panel ×1 6. Left Desk Bottom Panel ×1 7. Left Desk Back Panel×1 8. Left Drawer Firtst Front Panel×2 9. Left Drawer First Left Side Panel×2 10. Left Drawer First Right Side Panel×2 11. Left Drawer First Back Side Panel×2 12. Left Drawer First Bottom Panel×2 13. Left Drawer Second First Front Panel×1 14.
ASSEMBLY INSTRUCTIONS 1 Select J×18,F×3,G×3 and 4×1, 5×1. Position 4 in the left, position 5 in the right. Insert J×3 into F into 4. Repeat for another F×2 and J×6. Insert J×3 into G into 5. Repeat the same steps for another G×2 and J×6. J J 5 J J J J J J G J G G J J J 4 J J J J J J F J F F 2 Select C×4, D×4 and 6×1. Insert C×2 and D×2 into the hole of 4 and 6. Repeat for 5 and 6.
ASSEMBLY INSTRUCTIONS 3 Select E×4, M×4. Insert E×4 into M×4 into four corners of 6 into 4 and 5. M 5 E M E 4 6 M E M E 4 3 Select A×4, B×4, C×4, 3×1, 7×1. Insert 3 into 4 and 5 with A×4 and C×4. Install B×2 into one side of 4.Repeat for the B×2 into 5.
ASSEMBLY INSTRUCTIONS 5 Select C×8,D×8,19×1, 20×1, 21×1, 22×1, 23×1. Insert C×8,D×8 into 19 into the hole of 20, 21, 22 and 23. 21 C 23 C C 22 C D D C 20 D C 19 D D D C D D 6 Select E×4, M×4, 19×1, 20×1.Insert E×4 into M×4 into 19 into 20,21,22 and 23.
ASSEMBLY INSTRUCTIONS 7 Select A×8, B×8, C×8, 18×1, 20×1, 21×1, 22×1 and 23×1. Insert one side of 18 into 21 with A×2,C×2. Install B×2 into 20 tightly.Insert the other side of 18 into 21,22 and 23 with A×6,B×6 and C×6. Install B×2 into 21.Repeat for 22 and 23. A C 18 A B B A A A 20 C C A B 23 B B B 19 21 8 E Select C×8, E×8, 1×1 and 2×2. Insert 2 into 1 with E×4 and C×4. Repeat for the other 2.
ASSEMBLY INSTRUCTIONS 9 Select P×2. Insert 1 into 3 and 18 with P×2. 1 P 18 3 P 10 Select D×4, 9×1, 10×1,11×1. Insert 9 into one side of 11 with D×2. Repeat for 10.
ASSEMBLY INSTRUCTIONS 11 Select A×2, B×2, C×2, K×1, L×2, 8×1 and 12×1. Install K into 8 with L×2. Push 12 along the grooves of 9 and 10. Insert 8 into the holes of 9 and 10 with A×2 and C×2. Install the B×2 into the 9 and 10. 10 B A 12 9 L A L C B C K 8 12 E Select E×6, H×1, I×1. Insert H into 10 with E×3. Repeat for I.
ASSEMBLY INSTRUCTIONS 13 D Select D×4, O×2, 14×1, 15×1 and 16×1. Insert 14 into one side of 16 with D×2. Repeat for 15. Insert O×2 into 14 and 15. O D 15 16 O D 14 D 14 Select A×4, B×4, K×1, L×2 and 13×1. Insert K into 13 with L×2. Install 13 into 14 and 15 with A×4 and B×4.
ASSEMBLY INSTRUCTIONS E 15 E Insert H into 15 with E×3. Repeat for I. E E E E 14 I H 15 16 Select N×12, 24×2 and 25×1. Insert N×4 into 20 and 23.Put 25 on the N×4. Insert N×4 into 21 and 22. Put 24 on N×4. Repeat for the other 24.
ASSEMBLY COMPLETE CONGRATULATIONS, YOUR EXECUTIVEL- SHAPED DESK IS COMPLETE! Page 13 of 13