Use and Care Manual

1
USE AND MAINTENANCE
- Use on level surfaces only
- Because this product needs assembly, it is prone to working itself loose from
time to time depending on the use. Please take the time to check that all
connections are still tight and working properly for safety.
- Only clean using a damp cloth and mild detergent, do not use bleach or
abrasive cleaners.
Pushback Recliner
PART LIST
Assembly Instructions
1 - Seat Base x1
1
A
1. Unpack 1 - Seat Base and turn on it
side. Remove any packing
straps or materials from underside of
Seat Base securing the footrest from opening
2. Select 3 Leg, and
4, fabric protector
A
washer. Insert leg post
through hole in washer then
into hole in 1 Seat Base.
Facing the leg end, turn leg
clockwise (right) to tighten
leg.
4
A
3
A
3.
Repeat for 3 other fabric protector
washers and legs.
1
A
2 - Back Rest x1
4. Turn 1 - Seat Base upright
onto the legs.
2
B
5. Select 2 - Backrest and open
the back fabric.
2
2
B
1
3 - Legs x4
6. Select 1 - Seat Base and 2 - Backrest.
With Backrest fabric facing outward, carefully align
backrest mounts to seat-base mounts. Insert bottom
backrest mounts into Seat Base Mounts until they
latch and backrest is secured to seat-base. Exercising
Caution, Carefully lift
A
upward on the backrest to confirm backrest
is secured.
4 - Fabric Protector
Washer
7. Close the back fabric
8. Congratulations! Setup
of your new Naomi
Home Landon Pushback
Recliner
is complete!
Note: when seated,
hold the arm rests and
push back with your
torso to recline
1