User Manual
FLANGE KIT INSTALLATION
21
© 2019 The Legacy Companies
Crescent Ice Maker Instruction Manual
FLUSH TO DOOR:
INSTALLATION
1. Remove the ange and screws from the shipping carton.
2. Using a athead screwdriver, carefully remove the pre-installed decorative plugs from the screw
holes located on the top, left, and right panels of the ice maker.
3. Put the ange through the front of the ice maker on the cabinet.
4. Adjust the feet to make sure the ange does NOT touch the ground.
5. Align the ange squarely with the unit. Screw the ange tight with the cabinet of the ice maker.
6. Move the ice maker with the ange to the cabinet. The ice maker must sit on a level surface.
7. Screw the ange to the kitchen cabinet if the ice maker is installed in a moving environment for
anti-shock installation.