User Manual

INSTALLATION INSTRUCTIONS

Crescent Ice Maker Instruction Manual

To replace the door on the hinges:

1. Using a athead screwdriver, remove the plug buttons from the screw holes opposite the door

hinges, top, and bottom. Set aside.

2. Replace the axis on the Hinge 1 and tighten it rmly. Remove Hinge 1 and install it with the left

latch block (in the accessory bag) on the opposite bottom side.

3. Remove Hinge 2 and take down the right latch block. Place Hinge 2 on the opposite top side.

Separate the axis from Hinge 2 and set it aside.

4. Align the door on Bottom Hinge 1 and replace the axis on Hinge 2. Tighten it rmly. Place the

handle on the other side.

5. Push the plug buttons into the original screw holes.

6. Swap the door handle.