User guide

Email: support@quadraplus.com Last Revised 12/11/201010
When upgrade is in progress, DO NOT operate the unit or remove the USB
flash drive to prevent a malfunction or system error occurring. After the
upgrade is complete, please restart the unit when “Reboot” message occurs.
IMPORTANT WARNING
Ensure that the HDD is installed before upgrading the firmware as the new
firmware is stored in a temporary section on the HDD.
4.7 Time Search
4.7.1 Set Search time, then press Play button to start playback.
4.7.2 Playback:
Press button for fast-forward. Press again for faster speed with three variable
speeds available.
Press button for fast reverse. Press again for faster speed with three variable
speeds available.
Press button to pause.
Press button to stop playback.
Special Note: When entering the date and time you may find that you are unable to
enter certain numerics. This is because validation on the field is undertaken before a
value is entered. The field must always be valid on entering a character.
For example changing a date from 28 to 30 will not allow you to change the 2 to a 3
with the 8 still present, as this would be 38, so you must change the 8 to 0 first.
4.8 Exit
4.8.1 Save & Exit: Save and exit changes.
4.8.2 Exit without Saving: Exit without saving changes.
4.8.3 Load Setup Default: Load factory default setup.