Datasheet

MAX9111/MAX9113
Single/Dual LVDS Line Receivers with
Ultra-Low Pulse Skew in SOT23
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
(V
CC
= +3.0V to +3.6V, magnitude of input voltage, |V
ID
| = +0.1V to +1.0V, V
CM
= |V
ID
|/2 to (2.4V - (|V
ID
|/2)), T
A
= T
MIN
to T
MAX
.
Typical values are at V
CC
= +3.3V and T
A
= +25°C, unless otherwise noted.) (Notes 1, 2)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
V
CC
to GND..............................................................-0.3V to +4V
IN_ _ to GND .........................................................-0.3V to +3.9V
OUT_ _ to GND...........................................-0.3V to (V
CC
+ 0.3V)
ESD Protection All Pins
(Human Body Model, IN_+, IN_-) ..................................±11kV
Continuous Power Dissipation (T
A
= +70°C)
8-Pin SOT23 (derate 8.9mW/°C above +70°C)............714mW
8-Pin SO (derate 5.88mW°C above +70°C).................471mW
Operating Temperature Ranges
MAX911_E .......................................................-40°C to +85°C
MAX911_A .....................................................-40°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Differential Input High Threshold
(Note 3)
V
TH
V
CM
= 0.05V, 1.2V, 2.75V at 3.3V 100 mV
Differential Input Low Threshold
(Note 3)
V
TL
V
CM
= 0.05V, 1.2V, 2.75V at 3.3V -100 mV
Differential Input Resistance R
DIFF
V
CM
= 0.2V or 2.2V, V
ID
= ±0.4V,
V
CC
= 0 or 3.6V
518 kΩ
V
ID
= +200mV 2.7
Inputs shorted,
undriven
2.7
Output High Voltage (OUT_) V
OH
I
OH
= -4mA
100Ω parallel
termination,
undriven
2.7
V
Output Low Voltage (OUT_) V
OL
I
OL
= 4mA, V
ID
= -200mV 0.4
Output Short-Circuit Current I
OS
V
ID
= +200mV, V
OUT
_ = 0 -100 mA
MAX9111 4.2 6
No-Load Supply Current I
CC
MAX9113 8.7 11
mA